Re: [PATCH v3 26/27] Input: bu21013_ts - Use local 'client->dev' variable in probe()
From: Andy Shevchenko
Date: Thu Aug 27 2020 - 15:43:45 EST
On Thu, Aug 27, 2020 at 10:00 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>
> 'dev' is shorter and simpler than '&client->dev' and in few cases it
> allows to skip line wrapping. Probe function uses '&client->dev' a lot,
> so this improves readability slightly.
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Suggested-by: (I suppose)
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>
> ---
>
> Changes since v2:
> 1. New patch
> ---
> drivers/input/touchscreen/bu21013_ts.c | 61 ++++++++++++--------------
> 1 file changed, 28 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
> index 86bd38243d6c..f09204091ba5 100644
> --- a/drivers/input/touchscreen/bu21013_ts.c
> +++ b/drivers/input/touchscreen/bu21013_ts.c
> @@ -411,31 +411,32 @@ static int bu21013_probe(struct i2c_client *client,
> struct input_dev *in_dev;
> struct input_absinfo *info;
> u32 max_x = 0, max_y = 0;
> + struct device *dev = &client->dev;
> int error;
>
> if (!i2c_check_functionality(client->adapter,
> I2C_FUNC_SMBUS_BYTE_DATA)) {
> - dev_err(&client->dev, "i2c smbus byte data not supported\n");
> + dev_err(dev, "i2c smbus byte data not supported\n");
> return -EIO;
> }
>
> if (!client->irq) {
> - dev_err(&client->dev, "No IRQ set up\n");
> + dev_err(dev, "No IRQ set up\n");
> return -EINVAL;
> }
>
> - ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
> + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> if (!ts)
> return -ENOMEM;
>
> ts->client = client;
>
> - ts->x_flip = device_property_read_bool(&client->dev, "rohm,flip-x");
> - ts->y_flip = device_property_read_bool(&client->dev, "rohm,flip-y");
> + ts->x_flip = device_property_read_bool(dev, "rohm,flip-x");
> + ts->y_flip = device_property_read_bool(dev, "rohm,flip-y");
>
> - in_dev = devm_input_allocate_device(&client->dev);
> + in_dev = devm_input_allocate_device(dev);
> if (!in_dev) {
> - dev_err(&client->dev, "device memory alloc failed\n");
> + dev_err(dev, "device memory alloc failed\n");
> return -ENOMEM;
> }
> ts->in_dev = in_dev;
> @@ -445,8 +446,8 @@ static int bu21013_probe(struct i2c_client *client,
> in_dev->name = DRIVER_TP;
> in_dev->id.bustype = BUS_I2C;
>
> - device_property_read_u32(&client->dev, "rohm,touch-max-x", &max_x);
> - device_property_read_u32(&client->dev, "rohm,touch-max-y", &max_y);
> + device_property_read_u32(dev, "rohm,touch-max-x", &max_x);
> + device_property_read_u32(dev, "rohm,touch-max-y", &max_y);
>
> input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0, max_x, 0, 0);
> input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
> @@ -455,14 +456,14 @@ static int bu21013_probe(struct i2c_client *client,
>
> /* Adjust for the legacy "flip" properties, if present */
> if (!ts->props.invert_x &&
> - device_property_read_bool(&client->dev, "rohm,flip-x")) {
> + device_property_read_bool(dev, "rohm,flip-x")) {
> info = &in_dev->absinfo[ABS_MT_POSITION_X];
> info->maximum -= info->minimum;
> info->minimum = 0;
> }
>
> if (!ts->props.invert_y &&
> - device_property_read_bool(&client->dev, "rohm,flip-y")) {
> + device_property_read_bool(dev, "rohm,flip-y")) {
> info = &in_dev->absinfo[ABS_MT_POSITION_Y];
> info->maximum -= info->minimum;
> info->minimum = 0;
> @@ -472,50 +473,46 @@ static int bu21013_probe(struct i2c_client *client,
> INPUT_MT_DIRECT | INPUT_MT_TRACK |
> INPUT_MT_DROP_UNUSED);
> if (error) {
> - dev_err(&client->dev, "failed to initialize MT slots");
> + dev_err(dev, "failed to initialize MT slots");
> return error;
> }
>
> - ts->regulator = devm_regulator_get(&client->dev, "avdd");
> + ts->regulator = devm_regulator_get(dev, "avdd");
> if (IS_ERR(ts->regulator)) {
> - dev_err(&client->dev, "regulator_get failed\n");
> + dev_err(dev, "regulator_get failed\n");
> return PTR_ERR(ts->regulator);
> }
>
> error = regulator_enable(ts->regulator);
> if (error) {
> - dev_err(&client->dev, "regulator enable failed\n");
> + dev_err(dev, "regulator enable failed\n");
> return error;
> }
>
> - error = devm_add_action_or_reset(&client->dev, bu21013_power_off, ts);
> + error = devm_add_action_or_reset(dev, bu21013_power_off, ts);
> if (error) {
> - dev_err(&client->dev, "failed to install power off handler\n");
> + dev_err(dev, "failed to install power off handler\n");
> return error;
> }
>
> /* Named "CS" on the chip, DT binding is "reset" */
> - ts->cs_gpiod = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
> + ts->cs_gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> if (IS_ERR(ts->cs_gpiod))
> - return dev_err_probe(&client->dev, PTR_ERR(ts->cs_gpiod),
> - "failed to get CS GPIO\n");
> + return dev_err_probe(dev, PTR_ERR(ts->cs_gpiod), "failed to get CS GPIO\n");
>
> gpiod_set_consumer_name(ts->cs_gpiod, "BU21013 CS");
>
> - error = devm_add_action_or_reset(&client->dev,
> - bu21013_disable_chip, ts);
> + error = devm_add_action_or_reset(dev, bu21013_disable_chip, ts);
> if (error) {
> - dev_err(&client->dev,
> - "failed to install chip disable handler\n");
> + dev_err(dev, "failed to install chip disable handler\n");
> return error;
> }
>
> /* Named "INT" on the chip, DT binding is "touch" */
> - ts->int_gpiod = devm_gpiod_get_optional(&client->dev,
> - "touch", GPIOD_IN);
> + ts->int_gpiod = devm_gpiod_get_optional(dev, "touch", GPIOD_IN);
> error = PTR_ERR_OR_ZERO(ts->int_gpiod);
> if (error)
> - return dev_err_probe(&client->dev, error, "failed to get INT GPIO\n");
> + return dev_err_probe(dev, error, "failed to get INT GPIO\n");
>
> if (ts->int_gpiod)
> gpiod_set_consumer_name(ts->int_gpiod, "BU21013 INT");
> @@ -523,22 +520,20 @@ static int bu21013_probe(struct i2c_client *client,
> /* configure the touch panel controller */
> error = bu21013_init_chip(ts);
> if (error) {
> - dev_err(&client->dev, "error in bu21013 config\n");
> + dev_err(dev, "error in bu21013 config\n");
> return error;
> }
>
> - error = devm_request_threaded_irq(&client->dev, client->irq,
> - NULL, bu21013_gpio_irq,
> + error = devm_request_threaded_irq(dev, client->irq, NULL, bu21013_gpio_irq,
> IRQF_ONESHOT, DRIVER_TP, ts);
> if (error) {
> - dev_err(&client->dev, "request irq %d failed\n",
> - client->irq);
> + dev_err(dev, "request irq %d failed\n", client->irq);
> return error;
> }
>
> error = input_register_device(in_dev);
> if (error) {
> - dev_err(&client->dev, "failed to register input device\n");
> + dev_err(dev, "failed to register input device\n");
> return error;
> }
>
> --
> 2.17.1
>
--
With Best Regards,
Andy Shevchenko