[PATCH v2 3/6] mfd: Add driver for Embedded Controller found on Acer Iconia Tab A500

[Dmitry Osipenko]

Acer Iconia Tab A500 is an Android tablet device, it has ENE KB930
Embedded Controller which provides battery-gauge, LED, GPIO and some
other functions. The EC uses firmware that is specifically customized
for Acer A500. This patch adds MFD driver for the Embedded Controller
which allows to power-off / reboot the A500 device, it also provides
a common register read/write API that will be used by the sub-devices.

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 drivers/mfd/Kconfig        |  12 +++
 drivers/mfd/Makefile       |   1 +
 drivers/mfd/acer-ec-a500.c | 203 +++++++++++++++++++++++++++++++++++++
 3 files changed, 216 insertions(+)
 create mode 100644 drivers/mfd/acer-ec-a500.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ecd791ad5e8f..7a0f4952c76e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2062,6 +2062,18 @@ config MFD_KHADAS_MCU
 	  additional drivers must be enabled in order to use the functionality
 	  of the device.
 
+config MFD_ACER_A500_EC
+	tristate "Embedded Controller driver for Acer Iconia Tab A500"
+	depends on I2C
+	depends on ARCH_TEGRA_2x_SOC || COMPILE_TEST
+	select MFD_CORE
+	select REGMAP
+	help
+	  Support for Acer Iconia Tab A500 Embedded Controller.
+
+	  The controller itself is ENE KB930, it is running firmware
+	  customized for the specific needs of the Acer A500 hardware.
+
 menu "Multimedia Capabilities Port drivers"
 	depends on ARCH_SA1100
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index dd2cc7be7eaa..f6652fb33b7a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -262,6 +262,7 @@ obj-$(CONFIG_MFD_ROHM_BD71828)	+= rohm-bd71828.o
 obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-bd718x7.o
 obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o
 obj-$(CONFIG_MFD_KHADAS_MCU) 	+= khadas-mcu.o
+obj-$(CONFIG_MFD_ACER_A500_EC)	+= acer-ec-a500.o
 
 obj-$(CONFIG_SGI_MFD_IOC3)	+= ioc3.o
 
diff --git a/drivers/mfd/acer-ec-a500.c b/drivers/mfd/acer-ec-a500.c
new file mode 100644
index 000000000000..2785a6d9bcc4
--- /dev/null
+++ b/drivers/mfd/acer-ec-a500.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * MFD driver for Acer Iconia Tab A500 Embedded Controller.
+ *
+ * Copyright 2020 GRATE-driver project.
+ *
+ * Based on downstream driver from Acer Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/reboot.h>
+
+#define A500_EC_I2C_ERR_TIMEOUT		500
+#define A500_EC_POWER_CMD_TIMEOUT	1000
+
+enum {
+	REG_CURRENT_NOW = 0x03,
+	REG_SHUTDOWN = 0x52,
+	REG_WARM_REBOOT = 0x54,
+	REG_COLD_REBOOT = 0x55,
+};
+
+static struct i2c_client *a500_ec_client_pm_off;
+
+static int a500_ec_read(void *context, const void *reg_buf, size_t reg_size,
+			void *val_buf, size_t val_sizel)
+{
+	struct i2c_client *client = context;
+	unsigned int reg, retries = 5;
+	u16 *ret_val = val_buf;
+	s32 ret = 0;
+
+	if (reg_size != 1 || val_sizel != 2)
+		return -EOPNOTSUPP;
+
+	reg = *(u8 *)reg_buf;
+
+	while (retries-- > 0) {
+		ret = i2c_smbus_read_word_data(client, reg);
+		if (ret >= 0)
+			break;
+
+		msleep(A500_EC_I2C_ERR_TIMEOUT);
+	}
+
+	if (ret < 0) {
+		dev_err(&client->dev, "read 0x%x failed: %d\n", reg, ret);
+		return ret;
+	}
+
+	*ret_val = ret;
+
+	if (reg == REG_CURRENT_NOW)
+		fsleep(10000);
+
+	return 0;
+}
+
+static int a500_ec_write(void *context, const void *data, size_t count)
+{
+	struct i2c_client *client = context;
+	unsigned int reg, val, retries = 5;
+	s32 ret = 0;
+
+	if (count != 3)
+		return -EOPNOTSUPP;
+
+	reg = *(u8  *)(data + 0);
+	val = *(u16 *)(data + 1);
+
+	while (retries-- > 0) {
+		ret = i2c_smbus_write_word_data(client, reg, val);
+		if (ret >= 0)
+			break;
+
+		msleep(A500_EC_I2C_ERR_TIMEOUT);
+	}
+
+	if (ret < 0) {
+		dev_err(&client->dev, "write 0x%x failed: %d\n", reg, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct regmap_config a500_ec_regmap_config = {
+	.name = "KB930",
+	.reg_bits = 8,
+	.val_bits = 16,
+	.max_register = 0xff,
+};
+
+static const struct regmap_bus a500_ec_regmap_bus = {
+	.reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+	.val_format_endian_default = REGMAP_ENDIAN_LITTLE,
+	.write = a500_ec_write,
+	.read = a500_ec_read,
+	.max_raw_read = 2,
+};
+
+static void a500_ec_poweroff(void)
+{
+	i2c_smbus_write_word_data(a500_ec_client_pm_off, REG_SHUTDOWN, 0);
+
+	mdelay(A500_EC_POWER_CMD_TIMEOUT);
+}
+
+static int a500_ec_restart_notify(struct notifier_block *this,
+				  unsigned long reboot_mode, void *data)
+{
+	if (reboot_mode == REBOOT_WARM)
+		i2c_smbus_write_word_data(a500_ec_client_pm_off,
+					  REG_WARM_REBOOT, 0);
+	else
+		i2c_smbus_write_word_data(a500_ec_client_pm_off,
+					  REG_COLD_REBOOT, 1);
+
+	mdelay(A500_EC_POWER_CMD_TIMEOUT);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block a500_ec_restart_handler = {
+	.notifier_call = a500_ec_restart_notify,
+	.priority = 200,
+};
+
+static const struct mfd_cell a500_ec_cells[] = {
+	{ .name = "acer-a500-iconia-battery", },
+	{ .name = "acer-a500-iconia-leds", },
+};
+
+static int a500_ec_probe(struct i2c_client *client)
+{
+	struct regmap *rmap;
+	int err;
+
+	rmap = devm_regmap_init(&client->dev, &a500_ec_regmap_bus,
+				client, &a500_ec_regmap_config);
+	if (IS_ERR(rmap))
+		return PTR_ERR(rmap);
+
+	/* register battery and LED sub-devices */
+	err = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO,
+				   a500_ec_cells, ARRAY_SIZE(a500_ec_cells),
+				   NULL, 0, NULL);
+	if (err) {
+		dev_err(&client->dev, "failed to add sub-devices: %d\n", err);
+		return err;
+	}
+
+	/* set up power management functions */
+	if (of_device_is_system_power_controller(client->dev.of_node)) {
+		a500_ec_client_pm_off = client;
+
+		err = register_restart_handler(&a500_ec_restart_handler);
+		if (err)
+			return err;
+
+		if (!pm_power_off)
+			pm_power_off = a500_ec_poweroff;
+	}
+
+	return 0;
+}
+
+static int a500_ec_remove(struct i2c_client *client)
+{
+	if (of_device_is_system_power_controller(client->dev.of_node)) {
+		if (pm_power_off == a500_ec_poweroff)
+			pm_power_off = NULL;
+
+		unregister_restart_handler(&a500_ec_restart_handler);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id a500_ec_match[] = {
+	{ .compatible = "acer,a500-iconia-ec" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, a500_ec_match);
+
+static struct i2c_driver a500_ec_driver = {
+	.driver = {
+		.name = "acer-a500-embedded-controller",
+		.of_match_table = a500_ec_match,
+	},
+	.probe_new = a500_ec_probe,
+	.remove = a500_ec_remove,
+};
+module_i2c_driver(a500_ec_driver);
+
+MODULE_DESCRIPTION("Acer Iconia Tab A500 Embedded Controller driver");
+MODULE_AUTHOR("Dmitry Osipenko <digetx@xxxxxxxxx>");
+MODULE_LICENSE("GPL");
-- 
2.27.0