Re: [PATCH v3 1/1] drm/bridge: ps8640: Rework power state handling

[Bilal Wasim]

Hi Enric,

On Thu, 27 Aug 2020 10:59:11 +0200
Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> wrote:

> The get_edid() callback can be triggered anytime by an ioctl, i.e
> 
>   drm_mode_getconnector (ioctl)
>     -> drm_helper_probe_single_connector_modes
>        -> drm_bridge_connector_get_modes
>           -> ps8640_bridge_get_edid  
> 
> Actually if the bridge pre_enable() function was not called before
> get_edid(), the driver will not be able to get the EDID properly and
> display will not work until a second get_edid() call is issued and if
> pre_enable() is called before. The side effect of this, for example,
> is that you see anything when `Frecon` starts, neither the splash
> screen, until the graphical session manager starts.
> 
> To fix this we need to make sure that all we need is enabled before
> reading the EDID. This means the following:
> 
> 1. If get_edid() is called before having the device powered we need to
>    power on the device. In such case, the driver will power off again
> the device.
> 
> 2. If get_edid() is called after having the device powered, all should
>    just work. We added a powered flag in order to avoid recurrent
> calls to ps8640_bridge_poweron() and unneeded delays.
> 
> 3. This seems to be specific for this device, but we need to make sure
>    the panel is powered on before do a power on cycle on this device.
>    Otherwise the device fails to retrieve the EDID.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> ---
> 
> Changes in v3:
> - Make poweron/poweroff and pre_enable/post_disable reverse one to
> each other (Sam Ravnborg)
> 
> Changes in v2:
> - Use drm_bridge_chain_pre_enable/post_disable() helpers (Sam
> Ravnborg)
> 
>  drivers/gpu/drm/bridge/parade-ps8640.c | 68
> ++++++++++++++++++++++---- 1 file changed, 58 insertions(+), 10
> deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c
> b/drivers/gpu/drm/bridge/parade-ps8640.c index
> 9f7b7a9c53c5..7bd0affa057a 100644 ---
> a/drivers/gpu/drm/bridge/parade-ps8640.c +++
> b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -65,6 +65,7 @@ struct
> ps8640 { struct regulator_bulk_data supplies[2];
>  	struct gpio_desc *gpio_reset;
>  	struct gpio_desc *gpio_powerdown;
> +	bool powered;
>  };
>  
>  static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e)
> @@ -91,13 +92,15 @@ static int ps8640_bridge_vdo_control(struct
> ps8640 *ps_bridge, return 0;
>  }
>  
> -static void ps8640_pre_enable(struct drm_bridge *bridge)
> +static void ps8640_bridge_poweron(struct ps8640 *ps_bridge)
>  {
> -	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
>  	struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
>  	unsigned long timeout;
>  	int ret, status;
>  
> +	if (ps_bridge->powered)
> +		return;
> +
>  	ret = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies),
>  				    ps_bridge->supplies);
>  	if (ret < 0) {
> @@ -152,10 +155,6 @@ static void ps8640_pre_enable(struct drm_bridge
> *bridge) goto err_regulators_disable;
>  	}
>  
> -	ret = ps8640_bridge_vdo_control(ps_bridge, ENABLE);
> -	if (ret)
> -		goto err_regulators_disable;
> -
>  	/* Switch access edp panel's edid through i2c */
>  	ret = i2c_smbus_write_byte_data(client, PAGE2_I2C_BYPASS,
>  					I2C_BYPASS_EN);
> @@ -164,6 +163,8 @@ static void ps8640_pre_enable(struct drm_bridge
> *bridge) goto err_regulators_disable;
>  	}
>  
> +	ps_bridge->powered = true;
> +
>  	return;
>  
>  err_regulators_disable:
> @@ -171,12 +172,12 @@ static void ps8640_pre_enable(struct drm_bridge
> *bridge) ps_bridge->supplies);
>  }
>  
> -static void ps8640_post_disable(struct drm_bridge *bridge)
> +static void ps8640_bridge_poweroff(struct ps8640 *ps_bridge)
>  {
> -	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
>  	int ret;
>  
> -	ps8640_bridge_vdo_control(ps_bridge, DISABLE);
> +	if (!ps_bridge->powered)
> +		return;
>  
>  	gpiod_set_value(ps_bridge->gpio_reset, 1);
>  	gpiod_set_value(ps_bridge->gpio_powerdown, 1);
> @@ -184,6 +185,28 @@ static void ps8640_post_disable(struct
> drm_bridge *bridge) ps_bridge->supplies);
>  	if (ret < 0)
>  		DRM_ERROR("cannot disable regulators %d\n", ret);
> +
> +	ps_bridge->powered = false;
> +}
> +
> +static void ps8640_pre_enable(struct drm_bridge *bridge)
> +{
> +	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> +	int ret;
> +
> +	ps8640_bridge_poweron(ps_bridge);
> +
> +	ret = ps8640_bridge_vdo_control(ps_bridge, ENABLE);
> +	if (ret < 0)
> +		ps8640_bridge_poweroff(ps_bridge);
> +}
> +
> +static void ps8640_post_disable(struct drm_bridge *bridge)
> +{
> +	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> +
> +	ps8640_bridge_vdo_control(ps_bridge, DISABLE);
> +	ps8640_bridge_poweroff(ps_bridge);
>  }
>  
>  static int ps8640_bridge_attach(struct drm_bridge *bridge,
> @@ -249,9 +272,34 @@ static struct edid
> *ps8640_bridge_get_edid(struct drm_bridge *bridge, struct
> drm_connector *connector) {
>  	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> +	bool poweroff = !ps_bridge->powered;
> +	struct edid *edid;
> +
> +	/*
> +	 * When we end calling get_edid() triggered by an ioctl, i.e
> +	 *
> +	 *   drm_mode_getconnector (ioctl)
> +	 *     -> drm_helper_probe_single_connector_modes
> +	 *        -> drm_bridge_connector_get_modes
> +	 *           -> ps8640_bridge_get_edid
> +	 *
> +	 * We need to make sure that what we need is enabled before
> reading
> +	 * EDID, for this chip, we need to do a full poweron,
> otherwise it will
> +	 * fail.
> +	 */
> +	drm_bridge_chain_pre_enable(bridge);

Are we sure that pre_enable is always good enough to get the EDID? I
know that we only have support for ps8640 on the MT8173 SoC which works
only with pre_enable, but I think a more scalable solution would be to
call drm_bridge_chain_pre_enable / drm_bridge_chain_enable here, and
drm_bridge_chain_post_disable / drm_bridge_chain_disable when disabling
the chain. If this is not a concern and we are sure that pre_enable
will always work (especially on newer boards), then please ignore my
comment. 

Other than this, everything looks fine.

>  
> -	return drm_get_edid(connector,
> +	edid = drm_get_edid(connector,
>  			    ps_bridge->page[PAGE0_DP_CNTL]->adapter);
> +
> +	/*
> +	 * If we call the get_edid() function without having enabled
> the chip
> +	 * before, return the chip to its original power state.
> +	 */
> +	if (poweroff)
> +		drm_bridge_chain_post_disable(bridge);
> +
> +	return edid;
>  }
>  
>  static const struct drm_bridge_funcs ps8640_bridge_funcs = {

-Bilal