[PATCH v4 3/4] dt-bindings: media: imx274: Move clock and supplies to required properties

[Sowjanya Komatineni]

Clock and supplies are external to IMX274 sensor and are dependent
on camera module design.

So, this patch moves them to required properties.

Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/media/i2c/imx274.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt
index d0a5c899..b43bed6 100644
--- a/Documentation/devicetree/bindings/media/i2c/imx274.txt
+++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt
@@ -10,15 +10,15 @@ at 1440 Mbps.
 Required Properties:
 - compatible: value should be "sony,imx274" for imx274 sensor
 - reg: I2C bus address of the device
-
-Optional Properties:
-- reset-gpios: Sensor reset GPIO
 - clocks: Reference to the input clock.
 - clock-names: Should be "inck".
 - vana-supply: Sensor 2.8v analog supply.
 - vdig-supply: Sensor 1.8v digital core supply.
 - vddl-supply: Sensor digital IO 1.2v supply.
 
+Optional Properties:
+- reset-gpios: Sensor reset GPIO
+
 The imx274 device node should contain one 'port' child node with
 an 'endpoint' subnode. For further reading on port node refer to
 Documentation/devicetree/bindings/media/video-interfaces.txt.
-- 
2.7.4