[PATCH 4/8] scsi: hisi_sas: Make phy index variable name consistent

[John Garry]

From: Luo Jiaxing <luojiaxing@xxxxxxxxxx>

We use "phy_id" to identify phy in the BIST code, but the rest of code
always use "phy_no". So we change it for consistent coding style.

Signed-off-by: Luo Jiaxing <luojiaxing@xxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 50 +++++++++++++-------------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index b7d94f2e49ae..8a5c6f5e2a7a 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2971,42 +2971,42 @@ static void read_iost_itct_cache_v3_hw(struct hisi_hba *hisi_hba,
 static void hisi_sas_bist_test_prep_v3_hw(struct hisi_hba *hisi_hba)
 {
 	u32 reg_val;
-	int phy_id = hisi_hba->debugfs_bist_phy_no;
+	int phy_no = hisi_hba->debugfs_bist_phy_no;
 
 	/* disable PHY */
-	hisi_sas_phy_enable(hisi_hba, phy_id, 0);
+	hisi_sas_phy_enable(hisi_hba, phy_no, 0);
 
 	/* disable ALOS */
-	reg_val = hisi_sas_phy_read32(hisi_hba, phy_id, SERDES_CFG);
+	reg_val = hisi_sas_phy_read32(hisi_hba, phy_no, SERDES_CFG);
 	reg_val |= CFG_ALOS_CHK_DISABLE_MSK;
-	hisi_sas_phy_write32(hisi_hba, phy_id, SERDES_CFG, reg_val);
+	hisi_sas_phy_write32(hisi_hba, phy_no, SERDES_CFG, reg_val);
 }
 
 static void hisi_sas_bist_test_restore_v3_hw(struct hisi_hba *hisi_hba)
 {
 	u32 reg_val;
-	int phy_id = hisi_hba->debugfs_bist_phy_no;
+	int phy_no = hisi_hba->debugfs_bist_phy_no;
 
 	/* disable loopback */
-	reg_val = hisi_sas_phy_read32(hisi_hba, phy_id, SAS_PHY_BIST_CTRL);
+	reg_val = hisi_sas_phy_read32(hisi_hba, phy_no, SAS_PHY_BIST_CTRL);
 	reg_val &= ~(CFG_RX_BIST_EN_MSK | CFG_TX_BIST_EN_MSK |
 		     CFG_BIST_TEST_MSK);
-	hisi_sas_phy_write32(hisi_hba, phy_id, SAS_PHY_BIST_CTRL, reg_val);
+	hisi_sas_phy_write32(hisi_hba, phy_no, SAS_PHY_BIST_CTRL, reg_val);
 
 	/* enable ALOS */
-	reg_val = hisi_sas_phy_read32(hisi_hba, phy_id, SERDES_CFG);
+	reg_val = hisi_sas_phy_read32(hisi_hba, phy_no, SERDES_CFG);
 	reg_val &= ~CFG_ALOS_CHK_DISABLE_MSK;
-	hisi_sas_phy_write32(hisi_hba, phy_id, SERDES_CFG, reg_val);
+	hisi_sas_phy_write32(hisi_hba, phy_no, SERDES_CFG, reg_val);
 
 	/* restore the linkrate */
-	reg_val = hisi_sas_phy_read32(hisi_hba, phy_id, PROG_PHY_LINK_RATE);
+	reg_val = hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE);
 	/* init OOB link rate as 1.5 Gbits */
 	reg_val &= ~CFG_PROG_OOB_PHY_LINK_RATE_MSK;
 	reg_val |= (0x8 << CFG_PROG_OOB_PHY_LINK_RATE_OFF);
-	hisi_sas_phy_write32(hisi_hba, phy_id, PROG_PHY_LINK_RATE, reg_val);
+	hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE, reg_val);
 
 	/* enable PHY */
-	hisi_sas_phy_enable(hisi_hba, phy_id, 1);
+	hisi_sas_phy_enable(hisi_hba, phy_no, 1);
 }
 
 #define SAS_PHY_BIST_CODE_INIT	0x1
@@ -3015,28 +3015,28 @@ static int debugfs_set_bist_v3_hw(struct hisi_hba *hisi_hba, bool enable)
 {
 	u32 reg_val, mode_tmp;
 	u32 linkrate = hisi_hba->debugfs_bist_linkrate;
-	u32 phy_id = hisi_hba->debugfs_bist_phy_no;
+	u32 phy_no = hisi_hba->debugfs_bist_phy_no;
 	u32 code_mode = hisi_hba->debugfs_bist_code_mode;
 	u32 path_mode = hisi_hba->debugfs_bist_mode;
 	struct device *dev = hisi_hba->dev;
 
-	dev_info(dev, "BIST info:linkrate=%d phy_id=%d code_mode=%d path_mode=%d\n",
-		 linkrate, phy_id, code_mode, path_mode);
+	dev_info(dev, "BIST info:linkrate=%d phy_no=%d code_mode=%d path_mode=%d\n",
+		 linkrate, phy_no, code_mode, path_mode);
 	mode_tmp = path_mode ? 2 : 1;
 	if (enable) {
 		/* some preparations before bist test */
 		hisi_sas_bist_test_prep_v3_hw(hisi_hba);
 
 		/* set linkrate of bit test*/
-		reg_val = hisi_sas_phy_read32(hisi_hba, phy_id,
+		reg_val = hisi_sas_phy_read32(hisi_hba, phy_no,
 					      PROG_PHY_LINK_RATE);
 		reg_val &= ~CFG_PROG_OOB_PHY_LINK_RATE_MSK;
 		reg_val |= (linkrate << CFG_PROG_OOB_PHY_LINK_RATE_OFF);
-		hisi_sas_phy_write32(hisi_hba, phy_id,
-				     PROG_PHY_LINK_RATE, reg_val);
+		hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
+				     reg_val);
 
 		/* set code mode of bit test */
-		reg_val = hisi_sas_phy_read32(hisi_hba, phy_id,
+		reg_val = hisi_sas_phy_read32(hisi_hba, phy_no,
 					      SAS_PHY_BIST_CTRL);
 		reg_val &= ~(CFG_BIST_MODE_SEL_MSK |
 				CFG_LOOP_TEST_MODE_MSK |
@@ -3046,28 +3046,28 @@ static int debugfs_set_bist_v3_hw(struct hisi_hba *hisi_hba, bool enable)
 		reg_val |= ((code_mode << CFG_BIST_MODE_SEL_OFF) |
 			    (mode_tmp << CFG_LOOP_TEST_MODE_OFF) |
 			    CFG_BIST_TEST_MSK);
-		hisi_sas_phy_write32(hisi_hba, phy_id,
+		hisi_sas_phy_write32(hisi_hba, phy_no,
 				     SAS_PHY_BIST_CTRL, reg_val);
 
 		/* set the bist init value */
-		hisi_sas_phy_write32(hisi_hba, phy_id,
+		hisi_sas_phy_write32(hisi_hba, phy_no,
 				     SAS_PHY_BIST_CODE,
 				     SAS_PHY_BIST_CODE_INIT);
-		hisi_sas_phy_write32(hisi_hba, phy_id, SAS_PHY_BIST_CODE1,
+		hisi_sas_phy_write32(hisi_hba, phy_no, SAS_PHY_BIST_CODE1,
 				     SAS_PHY_BIST_CODE1_INIT);
 
 		mdelay(100);
 		reg_val |= (CFG_RX_BIST_EN_MSK | CFG_TX_BIST_EN_MSK);
-		hisi_sas_phy_write32(hisi_hba, phy_id,
+		hisi_sas_phy_write32(hisi_hba, phy_no,
 				     SAS_PHY_BIST_CTRL, reg_val);
 
 		/* clear error bit */
 		mdelay(100);
-		hisi_sas_phy_read32(hisi_hba, phy_id, SAS_BIST_ERR_CNT);
+		hisi_sas_phy_read32(hisi_hba, phy_no, SAS_BIST_ERR_CNT);
 	} else {
 		/* disable bist test and recover it */
 		hisi_hba->debugfs_bist_cnt += hisi_sas_phy_read32(hisi_hba,
-				phy_id, SAS_BIST_ERR_CNT);
+				phy_no, SAS_BIST_ERR_CNT);
 		hisi_sas_bist_test_restore_v3_hw(hisi_hba);
 	}
 
-- 
2.26.2