[PATCH v2 13/17] i2c: tegra: Check errors for both positive and negative values

[Dmitry Osipenko]

The driver's code is inconsistent in regards to the error values checking.
The correct way should be to check both positive and negative values.
This patch cleans up the error-checks in the code. Note that the
pm_runtime_get_sync() could return positive value on success, hence only
relevant parts of the code are changed by this patch.

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 drivers/i2c/busses/i2c-tegra.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index bc891d4b41ad..9a807caef4a6 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -674,19 +674,19 @@ static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
 		return ret;
 
 	ret = clk_enable(i2c_dev->fast_clk);
-	if (ret < 0) {
+	if (ret) {
 		dev_err(dev, "failed to enable fast clock: %d\n", ret);
 		return ret;
 	}
 
 	ret = clk_enable(i2c_dev->slow_clk);
-	if (ret < 0) {
+	if (ret) {
 		dev_err(dev, "failed to enable slow clock: %d\n", ret);
 		goto disable_fast_clk;
 	}
 
 	ret = clk_enable(i2c_dev->div_clk);
-	if (ret < 0) {
+	if (ret) {
 		dev_err(dev, "failed to enable div clock: %d\n", ret);
 		goto disable_slow_clk;
 	}
@@ -1047,7 +1047,7 @@ static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
 
 		slv_config.device_fc = true;
 		ret = dmaengine_slave_config(chan, &slv_config);
-		if (ret < 0) {
+		if (ret) {
 			dev_err(i2c_dev->dev, "dma config failed: %d\n", ret);
 			dev_err(i2c_dev->dev, "falling back to PIO\n");
 			tegra_i2c_release_dma(i2c_dev);
@@ -1235,7 +1235,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 						   xfer_size,
 						   DMA_FROM_DEVICE);
 			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
-			if (err < 0) {
+			if (err) {
 				dev_err(i2c_dev->dev,
 					"starting rx dma failed: %d\n", err);
 				return err;
@@ -1294,7 +1294,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 						   xfer_size,
 						   DMA_TO_DEVICE);
 			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
-			if (err < 0) {
+			if (err) {
 				dev_err(i2c_dev->dev,
 					"starting tx dma failed: %d\n", err);
 				return err;
-- 
2.27.0