Re: [PATCH 1/7] arm64: dts: ti: k3-am65*: Use generic gpio for node names

[Suman Anna]

On 9/1/20 5:30 PM, Nishanth Menon wrote:
> Use gpio@ naming for nodes following standard conventions of device
> tree (section 2.2.2 Generic Names recommendation in [1]).
> 
> [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3
> 
> Suggested-by: Suman Anna <s-anna@xxxxxx>
> Signed-off-by: Nishanth Menon <nm@xxxxxx>

Acked-by: Suman Anna <s-anna@xxxxxx>

> ---
>  arch/arm64/boot/dts/ti/k3-am65-main.dtsi   | 4 ++--
>  arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> index 76e0edc4ad5c..336d09d6fec7 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> @@ -661,7 +661,7 @@
>  		};
>  	};
>  
> -	main_gpio0:  main_gpio0@600000 {
> +	main_gpio0: gpio@600000 {
>  		compatible = "ti,am654-gpio", "ti,keystone-gpio";
>  		reg = <0x0 0x600000 0x0 0x100>;
>  		gpio-controller;
> @@ -676,7 +676,7 @@
>  		clock-names = "gpio";
>  	};
>  
> -	main_gpio1:  main_gpio1@601000 {
> +	main_gpio1: gpio@601000 {
>  		compatible = "ti,am654-gpio", "ti,keystone-gpio";
>  		reg = <0x0 0x601000 0x0 0x100>;
>  		gpio-controller;
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> index a1ffe88d9664..0765700a8ba8 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> @@ -80,7 +80,7 @@
>  		ti,interrupt-ranges = <0 712 16>;
>  	};
>  
> -	wkup_gpio0: wkup_gpio0@42110000 {
> +	wkup_gpio0: gpio@42110000 {
>  		compatible = "ti,am654-gpio", "ti,keystone-gpio";
>  		reg = <0x42110000 0x100>;
>  		gpio-controller;
>