[PATCH v6 5/8] powerpc/watchpoint: Fix exception handling for CONFIG_HAVE_HW_BREAKPOINT=N
From: Ravi Bangoria
Date: Wed Sep 02 2020 - 00:30:46 EST
On powerpc, ptrace watchpoint works in one-shot mode. i.e. kernel
disables event every time it fires and user has to re-enable it.
Also, in case of ptrace watchpoint, kernel notifies ptrace user
before executing instruction.
With CONFIG_HAVE_HW_BREAKPOINT=N, kernel is missing to disable
ptrace event and thus it's causing infinite loop of exceptions.
This is especially harmful when user watches on a data which is
also read/written by kernel, eg syscall parameters. In such case,
infinite exceptions happens in kernel mode which causes soft-lockup.
Fixes: 9422de3e953d ("powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers")
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@xxxxxxxxxxxxx>
Signed-off-by: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
---
arch/powerpc/include/asm/hw_breakpoint.h | 3 ++
arch/powerpc/kernel/process.c | 48 +++++++++++++++++++++++
arch/powerpc/kernel/ptrace/ptrace-noadv.c | 4 +-
3 files changed, 54 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index 81872c420476..abebfbee5b1c 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -18,6 +18,7 @@ struct arch_hw_breakpoint {
u16 type;
u16 len; /* length of the target data symbol */
u16 hw_len; /* length programmed in hw */
+ u8 flags;
};
/* Note: Don't change the first 6 bits below as they are in the same order
@@ -37,6 +38,8 @@ struct arch_hw_breakpoint {
#define HW_BRK_TYPE_PRIV_ALL (HW_BRK_TYPE_USER | HW_BRK_TYPE_KERNEL | \
HW_BRK_TYPE_HYP)
+#define HW_BRK_FLAG_DISABLED 0x1
+
/* Minimum granularity */
#ifdef CONFIG_PPC_8xx
#define HW_BREAKPOINT_SIZE 0x4
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 016bd831908e..160fbbf41d40 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -636,6 +636,44 @@ void do_send_trap(struct pt_regs *regs, unsigned long address,
(void __user *)address);
}
#else /* !CONFIG_PPC_ADV_DEBUG_REGS */
+
+static void do_break_handler(struct pt_regs *regs)
+{
+ struct arch_hw_breakpoint null_brk = {0};
+ struct arch_hw_breakpoint *info;
+ struct ppc_inst instr = ppc_inst(0);
+ int type = 0;
+ int size = 0;
+ unsigned long ea;
+ int i;
+
+ /*
+ * If underneath hw supports only one watchpoint, we know it
+ * caused exception. 8xx also falls into this category.
+ */
+ if (nr_wp_slots() == 1) {
+ __set_breakpoint(0, &null_brk);
+ current->thread.hw_brk[0] = null_brk;
+ current->thread.hw_brk[0].flags |= HW_BRK_FLAG_DISABLED;
+ return;
+ }
+
+ /* Otherwise findout which DAWR caused exception and disable it. */
+ wp_get_instr_detail(regs, &instr, &type, &size, &ea);
+
+ for (i = 0; i < nr_wp_slots(); i++) {
+ info = ¤t->thread.hw_brk[i];
+ if (!info->address)
+ continue;
+
+ if (wp_check_constraints(regs, instr, ea, type, size, info)) {
+ __set_breakpoint(i, &null_brk);
+ current->thread.hw_brk[i] = null_brk;
+ current->thread.hw_brk[i].flags |= HW_BRK_FLAG_DISABLED;
+ }
+ }
+}
+
void do_break (struct pt_regs *regs, unsigned long address,
unsigned long error_code)
{
@@ -647,6 +685,16 @@ void do_break (struct pt_regs *regs, unsigned long address,
if (debugger_break_match(regs))
return;
+ /*
+ * We reach here only when watchpoint exception is generated by ptrace
+ * event (or hw is buggy!). Now if CONFIG_HAVE_HW_BREAKPOINT is set,
+ * watchpoint is already handled by hw_breakpoint_handler() so we don't
+ * have to do anything. But when CONFIG_HAVE_HW_BREAKPOINT is not set,
+ * we need to manually handle the watchpoint here.
+ */
+ if (!IS_ENABLED(CONFIG_HAVE_HW_BREAKPOINT))
+ do_break_handler(regs);
+
/* Deliver the signal to userspace */
force_sig_fault(SIGTRAP, TRAP_HWBKPT, (void __user *)address);
}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-noadv.c b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
index 57a0ab822334..c9122ed91340 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-noadv.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
@@ -286,11 +286,13 @@ long ppc_del_hwdebug(struct task_struct *child, long data)
}
return ret;
#else /* CONFIG_HAVE_HW_BREAKPOINT */
- if (child->thread.hw_brk[data - 1].address == 0)
+ if (!(child->thread.hw_brk[data - 1].flags & HW_BRK_FLAG_DISABLED) &&
+ child->thread.hw_brk[data - 1].address == 0)
return -ENOENT;
child->thread.hw_brk[data - 1].address = 0;
child->thread.hw_brk[data - 1].type = 0;
+ child->thread.hw_brk[data - 1].flags = 0;
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
return 0;
--
2.26.2