Re: [PATCH net-next 0/1] Support for VLAN interface over HSR/PRP
From: Murali Karicheri
Date: Wed Sep 02 2020 - 12:15:15 EST
All,
On 9/1/20 3:54 PM, Murali Karicheri wrote:
This series add support for creating VLAN interface over HSR or
PRP interface. Typically industrial networks uses VLAN in
deployment and this capability is needed to support these
networks.
This is tested using two TI AM572x IDK boards connected back
to back over CPSW ports (eth0 and eth1).
Following is the setup
Physical Setup
++++++++++++++
_______________ (CPSW) _______________
| |----eth0-----| |
|TI AM572x IDK1| | TI AM572x IDK2|
|______________|----eth1-----|_______________|
Network Topolgy
+++++++++++++++
TI AM571x IDK TI AM572x IDK
192.168.100.10 CPSW ports 192.168.100.20
IDK-1 IDK-2
hsr0/prp0.100--| 192.168.2.10 |--eth0--| 192.168.2.20 |--hsr0/prp0.100
|----hsr0/prp0--| |---hsr0/prp0--|
hsr0/prp0.101--| |--eth1--| |--hsr0/prp0/101
192.168.101.10 192.168.101.20
Following tests:-
- create hsr or prp interface and ping the interface IP address
and verify ping is successful.
- Create 2 VLANs over hsr or prp interface on both IDKs (VID 100 and
101). Ping between the IP address of the VLAN interfaces
- Do iperf UDP traffic test with server on one IDK and client on the
other. Do this using 100 and 101 subnet IP addresses
- Dump /proc/net/vlan/{hsr|prp}0.100 and verify frames are transmitted
and received at these interfaces.
- Delete the vlan and hsr/prp interface and verify interfaces are
removed cleanly.
Logs for IDK-1 at https://pastebin.ubuntu.com/p/NxF83yZFDX/
Logs for IDK-2 at https://pastebin.ubuntu.com/p/YBXBcsPgVK/
Murali Karicheri (1):
net: hsr/prp: add vlan support
net/hsr/hsr_device.c | 4 ----
net/hsr/hsr_forward.c | 16 +++++++++++++---
2 files changed, 13 insertions(+), 7 deletions(-)
I am not sure if the packet flow is right for this?
VLAN over HSR frame format is like this.
<Start of Frame><VLAN tag><HSR Tag><IP><CRC>
My ifconfig stats shows both hsr and hsr0.100 interfaces receiving
frames.
So I did a WARN_ON() in HSR driver before frame is forwarded to upper
layer.
a0868495local@uda0868495:~/Projects/upstream-kernel$ git diff
diff --git a/net/hsr/hsr_forward.c b/net/hsr/hsr_forward.c
index de21df30b0d9..545a3cd8c71b 100644
--- a/net/hsr/hsr_forward.c
+++ b/net/hsr/hsr_forward.c
@@ -415,9 +415,11 @@ static void hsr_forward_do(struct hsr_frame_info
*frame)
}
skb->dev = port->dev;
- if (port->type == HSR_PT_MASTER)
+ if (port->type == HSR_PT_MASTER) {
+ if (skb_vlan_tag_present(skb))
+ WARN_ON(1);
hsr_deliver_master(skb, port->dev,
frame->node_src);
- else
+ } else
hsr_xmit(skb, port, frame);
}
}
And I get the trace shown below.
[ 275.125431] WARNING: CPU: 0 PID: 0 at net/hsr/hsr_forward.c:420
hsr_forward_skb+0x460/0x564
[ 275.133822] Modules linked in: snd_soc_omap_hdmi snd_soc_ti_sdma
snd_soc_core snd_pcm_dmaengine snd_pcm snd_time4
[ 275.199705] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W
5.9.0-rc1-00658-g473e463812c2-dirty #8
[ 275.209573] Hardware name: Generic DRA74X (Flattened Device Tree)
[ 275.215703] [<c011177c>] (unwind_backtrace) from [<c010b6f0>]
(show_stack+0x10/0x14)
[ 275.223487] [<c010b6f0>] (show_stack) from [<c055690c>]
(dump_stack+0xc4/0xe4)
[ 275.230747] [<c055690c>] (dump_stack) from [<c01386ac>]
(__warn+0xc0/0xf4)
[ 275.237656] [<c01386ac>] (__warn) from [<c0138a3c>]
(warn_slowpath_fmt+0x58/0xb8)
[ 275.245177] [<c0138a3c>] (warn_slowpath_fmt) from [<c09564bc>]
(hsr_forward_skb+0x460/0x564)
[ 275.253657] [<c09564bc>] (hsr_forward_skb) from [<c0955534>]
(hsr_handle_frame+0x15c/0x190)
[ 275.262047] [<c0955534>] (hsr_handle_frame) from [<c07c6704>]
(__netif_receive_skb_core+0x23c/0xc88)
[ 275.271223] [<c07c6704>] (__netif_receive_skb_core) from [<c07c7180>]
(__netif_receive_skb_one_core+0x30/0x74)
[ 275.281266] [<c07c7180>] (__netif_receive_skb_one_core) from
[<c07c72a4>] (netif_receive_skb+0x50/0x1c4)
[ 275.290793] [<c07c72a4>] (netif_receive_skb) from [<c071a55c>]
(cpsw_rx_handler+0x230/0x308)
[ 275.299272] [<c071a55c>] (cpsw_rx_handler) from [<c0715ee8>]
(__cpdma_chan_process+0xf4/0x188)
[ 275.307925] [<c0715ee8>] (__cpdma_chan_process) from [<c0717294>]
(cpdma_chan_process+0x3c/0x5c)
[ 275.316754] [<c0717294>] (cpdma_chan_process) from [<c071dd14>]
(cpsw_rx_mq_poll+0x44/0x98)
[ 275.325145] [<c071dd14>] (cpsw_rx_mq_poll) from [<c07c8ae0>]
(net_rx_action+0xf0/0x400)
[ 275.333185] [<c07c8ae0>] (net_rx_action) from [<c0101370>]
(__do_softirq+0xf0/0x3ac)
[ 275.340965] [<c0101370>] (__do_softirq) from [<c013f5ec>]
(irq_exit+0xa8/0xe4)
[ 275.348224] [<c013f5ec>] (irq_exit) from [<c0199344>]
(__handle_domain_irq+0x6c/0xe0)
[ 275.356093] [<c0199344>] (__handle_domain_irq) from [<c056f8fc>]
(gic_handle_irq+0x4c/0xa8)
[ 275.364481] [<c056f8fc>] (gic_handle_irq) from [<c0100b6c>]
(__irq_svc+0x6c/0x90)
[ 275.371996] Exception stack(0xc0e01f18 to 0xc0e01f60)
Shouldn't it show vlan_do_receive() ?
if (skb_vlan_tag_present(skb)) {
if (pt_prev) {
ret = deliver_skb(skb, pt_prev, orig_dev);
pt_prev = NULL;
}
if (vlan_do_receive(&skb))
goto another_round;
else if (unlikely(!skb))
goto out;
}
Thanks
--
Murali Karicheri
Texas Instruments