Re: [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors

From: Suman Anna
Date: Wed Sep 02 2020 - 12:54:15 EST

Next message: Borislav Petkov: "Re: [RFC PATCH] tools/x86: add kcpuid tool to show raw CPU features"
Previous message: Alexey Budankov: "Re: [PATCH V2 6/6] perf intel-pt: Document snapshot control command"
In reply to: Nishanth Menon: "[PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors"
Next in thread: Nishanth Menon: "Re: [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 9/1/20 5:30 PM, Nishanth Menon wrote:
> Building with W=2 throws up a bunch of easy to fixup errors..
> node_name_chars_strict is one of them.. Knock those out.
>
> Signed-off-by: Nishanth Menon <nm@xxxxxx>
> ---
> arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 6 +++---
> arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 4 ++--
> arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 16 ++++++++--------
> .../dts/ti/k3-am654-industrial-thermal.dtsi | 12 ++++++------
> .../boot/dts/ti/k3-j721e-common-proc-board.dts | 18 +++++++++---------
> arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 6 +++---
> .../arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 2 +-
> arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 2 +-
> 8 files changed, 33 insertions(+), 33 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> index 9c96e3f58c86..ff3e38408dbc 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> @@ -305,7 +305,7 @@
> no-1-8-v;
> };
>
> - scm_conf: scm_conf@100000 {
> + scm_conf: scm-conf@100000 {
> compatible = "syscon", "simple-mfd";
> reg = <0 0x00100000 0 0x1c000>;
> #address-cells = <1>;
> @@ -344,7 +344,7 @@
> <0x4090 0x3>; /* SERDES1 lane select */
> };
>
> - dss_oldi_io_ctrl: dss_oldi_io_ctrl@41E0 {
> + dss_oldi_io_ctrl: dss-oldi-io-ctrl@41E0 {
> compatible = "syscon";
> reg = <0x0000041E0 0x14>;

We should %s/41E0/41e0/, but that change is not directly associated with the
patch subject line. Perhaps, an additional patch? Remember seeing similar
warning on some downstream crypto nodes, but strangely I am not seeing on these
upstream nodes.

Otherwise,
Reviewed-by: Suman Anna <s-anna@xxxxxx>

regards
Suman

> };
> @@ -445,7 +445,7 @@
> ti,interrupt-ranges = <0 392 32>;
> };
>
> - main_navss {
> + main-navss {
> compatible = "simple-mfd";
> #address-cells = <2>;
> #size-cells = <2>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> index 6dfec68ac865..435e51019287 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> @@ -6,7 +6,7 @@
> */
>
> &cbass_mcu {
> - mcu_conf: scm_conf@40f00000 {
> + mcu_conf: scm-conf@40f00000 {
> compatible = "syscon", "simple-mfd";
> reg = <0x0 0x40f00000 0x0 0x20000>;
> #address-cells = <1>;
> @@ -116,7 +116,7 @@
> };
> };
>
> - mcu_navss {
> + mcu-navss {
> compatible = "simple-mfd";
> #address-cells = <2>;
> #size-cells = <2>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> index 86c9074cb070..d12dd89f3405 100644
> --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> @@ -29,7 +29,7 @@
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
> - secure_ddr: secure_ddr@9e800000 {
> + secure_ddr: secure-ddr@9e800000 {
> reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
> alignment = <0x1000>;
> no-map;
> @@ -70,14 +70,14 @@
> >;
> };
>
> - push_button_pins_default: push_button__pins_default {
> + push_button_pins_default: push-button-pins-default {
> pinctrl-single,pins = <
> AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
> AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
> >;
> };
>
> - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
> + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
> pinctrl-single,pins = <
> AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
> AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */
> @@ -93,13 +93,13 @@
> >;
> };
>
> - wkup_pca554_default: wkup_pca554_default {
> + wkup_pca554_default: wkup-pca554-default {
> pinctrl-single,pins = <
> AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
> >;
> };
>
> - mcu_cpsw_pins_default: mcu_cpsw_pins_default {
> + mcu_cpsw_pins_default: mcu-cpsw-pins-default {
> pinctrl-single,pins = <
> AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
> AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
> @@ -116,7 +116,7 @@
> >;
> };
>
> - mcu_mdio_pins_default: mcu_mdio1_pins_default {
> + mcu_mdio_pins_default: mcu-mdio1-pins-default {
> pinctrl-single,pins = <
> AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
> AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
> @@ -167,7 +167,7 @@
> >;
> };
>
> - main_mmc1_pins_default: main_mmc1_pins_default {
> + main_mmc1_pins_default: main-mmc1-pins-default {
> pinctrl-single,pins = <
> AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
> AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
> @@ -180,7 +180,7 @@
> >;
> };
>
> - usb1_pins_default: usb1_pins_default {
> + usb1_pins_default: usb1-pins-default {
> pinctrl-single,pins = <
> AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
> >;
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
> index cdc3d40c3f60..9021c738056b 100644
> --- a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
> @@ -2,13 +2,13 @@
>
> #include <dt-bindings/thermal/thermal.h>
>
> -mpu0_thermal: mpu0_thermal {
> +mpu0_thermal: mpu0-thermal {
> polling-delay-passive = <250>; /* milliseconds */
> polling-delay = <500>; /* milliseconds */
> thermal-sensors = <&wkup_vtm0 0>;
>
> trips {
> - mpu0_crit: mpu0_crit {
> + mpu0_crit: mpu0-crit {
> temperature = <125000>; /* milliCelsius */
> hysteresis = <2000>; /* milliCelsius */
> type = "critical";
> @@ -16,13 +16,13 @@ mpu0_thermal: mpu0_thermal {
> };
> };
>
> -mpu1_thermal: mpu1_thermal {
> +mpu1_thermal: mpu1-thermal {
> polling-delay-passive = <250>; /* milliseconds */
> polling-delay = <500>; /* milliseconds */
> thermal-sensors = <&wkup_vtm0 1>;
>
> trips {
> - mpu1_crit: mpu1_crit {
> + mpu1_crit: mpu1-crit {
> temperature = <125000>; /* milliCelsius */
> hysteresis = <2000>; /* milliCelsius */
> type = "critical";
> @@ -30,13 +30,13 @@ mpu1_thermal: mpu1_thermal {
> };
> };
>
> -mcu_thermal: mcu_thermal {
> +mcu_thermal: mcu-thermal {
> polling-delay-passive = <250>; /* milliseconds */
> polling-delay = <500>; /* milliseconds */
> thermal-sensors = <&wkup_vtm0 2>;
>
> trips {
> - mcu_crit: mcu_crit {
> + mcu_crit: mcu-crit {
> temperature = <125000>; /* milliCelsius */
> hysteresis = <2000>; /* milliCelsius */
> type = "critical";
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> index c355692796a9..648267284582 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> @@ -86,13 +86,13 @@
> };
>
> &main_pmx0 {
> - sw10_button_pins_default: sw10_button_pins_default {
> + sw10_button_pins_default: sw10-button-pins-default {
> pinctrl-single,pins = <
> J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
> >;
> };
>
> - main_mmc1_pins_default: main_mmc1_pins_default {
> + main_mmc1_pins_default: main-mmc1-pins-default {
> pinctrl-single,pins = <
> J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
> J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
> @@ -106,14 +106,14 @@
> >;
> };
>
> - main_usbss0_pins_default: main_usbss0_pins_default {
> + main_usbss0_pins_default: main-usbss0-pins-default {
> pinctrl-single,pins = <
> J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
> J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
> >;
> };
>
> - main_usbss1_pins_default: main_usbss1_pins_default {
> + main_usbss1_pins_default: main-usbss1-pins-default {
> pinctrl-single,pins = <
> J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
> >;
> @@ -153,7 +153,7 @@
> >;
> };
>
> - mcasp10_pins_default: mcasp10_pins_default {
> + mcasp10_pins_default: mcasp10-pins-default {
> pinctrl-single,pins = <
> J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */
> J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
> @@ -167,7 +167,7 @@
> >;
> };
>
> - audi_ext_refclk2_pins_default: audi_ext_refclk2_pins_default {
> + audi_ext_refclk2_pins_default: audi-ext-refclk2-pins-default {
> pinctrl-single,pins = <
> J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
> >;
> @@ -175,7 +175,7 @@
> };
>
> &wkup_pmx0 {
> - sw11_button_pins_default: sw11_button_pins_default {
> + sw11_button_pins_default: sw11-button-pins-default {
> pinctrl-single,pins = <
> J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
> >;
> @@ -194,7 +194,7 @@
> >;
> };
>
> - mcu_cpsw_pins_default: mcu_cpsw_pins_default {
> + mcu_cpsw_pins_default: mcu-cpsw-pins-default {
> pinctrl-single,pins = <
> J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
> J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
> @@ -211,7 +211,7 @@
> >;
> };
>
> - mcu_mdio_pins_default: mcu_mdio1_pins_default {
> + mcu_mdio_pins_default: mcu-mdio1-pins-default {
> pinctrl-single,pins = <
> J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */
> J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> index 1d2a7c05b6f3..ea57d07777ba 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> @@ -86,7 +86,7 @@
> ti,interrupt-ranges = <8 392 56>;
> };
>
> - main_navss {
> + main-navss {
> compatible = "simple-mfd";
> #address-cells = <2>;
> #size-cells = <2>;
> @@ -888,7 +888,7 @@
> no-1-8-v;
> };
>
> - usbss0: cdns_usb@4104000 {
> + usbss0: cdns-usb@4104000 {
> compatible = "ti,j721e-usb";
> reg = <0x00 0x4104000 0x00 0x100>;
> dma-coherent;
> @@ -918,7 +918,7 @@
> };
> };
>
> - usbss1: cdns_usb@4114000 {
> + usbss1: cdns-usb@4114000 {
> compatible = "ti,j721e-usb";
> reg = <0x00 0x4114000 0x00 0x100>;
> dma-coherent;
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> index 81801f519a61..03fa69c0a038 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> @@ -249,7 +249,7 @@
> };
> };
>
> - mcu_navss {
> + mcu-navss {
> compatible = "simple-mfd";
> #address-cells = <2>;
> #size-cells = <2>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
> index d69d90c8b5e3..5dc3ba739131 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
> @@ -71,7 +71,7 @@
> };
>
> &wkup_pmx0 {
> - wkup_i2c0_pins_default: wkup_i2c0_pins_default {
> + wkup_i2c0_pins_default: wkup-i2c0-pins-default {
> pinctrl-single,pins = <
> J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
> J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
>

Next message: Borislav Petkov: "Re: [RFC PATCH] tools/x86: add kcpuid tool to show raw CPU features"
Previous message: Alexey Budankov: "Re: [PATCH V2 6/6] perf intel-pt: Document snapshot control command"
In reply to: Nishanth Menon: "[PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors"
Next in thread: Nishanth Menon: "Re: [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]