Re: [PATCH 4/4] ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication

[Geert Uytterhoeven]

Hi Prabhakar,

On Tue, Aug 25, 2020 at 6:28 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> Add support for LED trigger on SD2 interface.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Reviewed-by: Chris Paterson <Chris.Paterson2@xxxxxxxxxxx>

> --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> @@ -63,6 +63,16 @@
>                 enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
>         };
>
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               sdhi2_led {
> +                       label = "sdio-led";
> +                       gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;

GPIO_ACTIVE_HIGH?

The LED is driven by an NPN transistor, with the LED between 3.3V and
the transistor's collector.

> +                       linux,default-trigger = "mmc1";
> +               };
> +       };
> +
>         lvds-receiver {
>                 compatible = "ti,ds90cf384a", "lvds-decoder";
>                 vcc-supply = <&vcc_3v3_tft1>;

With the above fixed:
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds