[PATCH 0/2] add support for Hisilicon SD5203 vector interrupt controller

[Zhen Lei]

The interrupt controller of SD5203 SoC is VIC(vector interrupt controller), it's
based on Synopsys DesignWare APB interrupt controller (dw_apb_ictl) IP, but it
can not directly use dw_apb_ictl driver. The main reason is that VIC is used as
primary interrupt controller and dw_apb_ictl driver worked for secondary
interrupt controller. So add a new driver: "hisilicon,sd5203-vic".

Kefeng Wang (1):
  irqchip: add Hisilicon SD5203 vector interrupt controller

Zhen Lei (1):
  dt-bindings: interrupt-controller: add Hisilicon SD5203 vector
    interrupt controller

 .../hisilicon,sd5203-vic.txt                  |  27 ++++
 drivers/irqchip/Kconfig                       |   5 +
 drivers/irqchip/Makefile                      |   1 +
 drivers/irqchip/irq-sd5203-vic.c              | 128 ++++++++++++++++++
 4 files changed, 161 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/hisilicon,sd5203-vic.txt
 create mode 100644 drivers/irqchip/irq-sd5203-vic.c

-- 
2.26.0.106.g9fadedd