[PATCH v3 7/7] arm64: dts: qcom: sc7180: Increase the number of interconnect cells

From: Georgi Djakov
Date: Thu Sep 03 2020 - 11:10:27 EST

Next message: Georgi Djakov: "[PATCH v3 3/7] interconnect: qcom: Implement xlate_extended() to parse tags"
Previous message: Dmitry Osipenko: "Re: [PATCH v3 05/22] i2c: tegra: Use reset_control_reset()"
In reply to: Georgi Djakov: "[PATCH v3 5/7] arm64: dts: qcom: sdm845: Increase the number of interconnect cells"
Next in thread: Georgi Djakov: "[PATCH v3 3/7] interconnect: qcom: Implement xlate_extended() to parse tags"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Sibi Sankar <sibis@xxxxxxxxxxxxxx>

Increase the number of interconnect-cells, as now we can include
the tag information. The consumers can specify the path tag as an
additional argument to the endpoints.

Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
Tested-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 218 +++++++++++++--------------
1 file changed, 109 insertions(+), 109 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index d3e6008cf3fb..d5007e61e6cc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -132,7 +132,7 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
@@ -158,7 +158,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_100>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -180,7 +180,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_200>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -202,7 +202,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_300>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -224,7 +224,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_400>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -246,7 +246,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_500>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -268,7 +268,7 @@ &BIG_CPU_SLEEP_1
dynamic-power-coefficient = <405>;
next-level-cache = <&L2_600>;
operating-points-v2 = <&cpu6_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
@@ -290,7 +290,7 @@ &BIG_CPU_SLEEP_1
dynamic-power-coefficient = <405>;
next-level-cache = <&L2_700>;
operating-points-v2 = <&cpu6_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
@@ -748,7 +748,7 @@ qupv3_id_0: geniqup@8c0000 {
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x43 0x0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>;
interconnect-names = "qup-core";
status = "disabled";

@@ -762,9 +762,9 @@ i2c0: i2c@880000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
- <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -782,8 +782,8 @@ spi0: spi@880000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -798,8 +798,8 @@ uart0: serial@880000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -814,9 +814,9 @@ i2c1: i2c@884000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
- <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -834,8 +834,8 @@ spi1: spi@884000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -850,8 +850,8 @@ uart1: serial@884000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -866,9 +866,9 @@ i2c2: i2c@888000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
- <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -884,8 +884,8 @@ uart2: serial@888000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -900,9 +900,9 @@ i2c3: i2c@88c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
- <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -920,8 +920,8 @@ spi3: spi@88c000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -936,8 +936,8 @@ uart3: serial@88c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -952,9 +952,9 @@ i2c4: i2c@890000 {
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
- <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -970,8 +970,8 @@ uart4: serial@890000 {
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -986,9 +986,9 @@ i2c5: i2c@894000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
- <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1006,8 +1006,8 @@ spi5: spi@894000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1022,8 +1022,8 @@ uart5: serial@894000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1039,7 +1039,7 @@ qupv3_id_1: geniqup@ac0000 {
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x4c3 0x0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>;
interconnect-names = "qup-core";
status = "disabled";

@@ -1053,9 +1053,9 @@ i2c6: i2c@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
- <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1073,8 +1073,8 @@ spi6: spi@a80000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1089,8 +1089,8 @@ uart6: serial@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1105,9 +1105,9 @@ i2c7: i2c@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
- <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1123,8 +1123,8 @@ uart7: serial@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1139,9 +1139,9 @@ i2c8: i2c@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
- <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1159,8 +1159,8 @@ spi8: spi@a88000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1175,8 +1175,8 @@ uart8: serial@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1191,9 +1191,9 @@ i2c9: i2c@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
- <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1209,8 +1209,8 @@ uart9: serial@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1225,9 +1225,9 @@ i2c10: i2c@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
- <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1245,8 +1245,8 @@ spi10: spi@a90000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1261,8 +1261,8 @@ uart10: serial@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1277,9 +1277,9 @@ i2c11: i2c@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
- <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1297,8 +1297,8 @@ spi11: spi@a94000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1313,8 +1313,8 @@ uart11: serial@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1323,63 +1323,63 @@ uart11: serial@a94000 {
config_noc: interconnect@1500000 {
compatible = "qcom,sc7180-config-noc";
reg = <0 0x01500000 0 0x28000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

system_noc: interconnect@1620000 {
compatible = "qcom,sc7180-system-noc";
reg = <0 0x01620000 0 0x17080>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

mc_virt: interconnect@1638000 {
compatible = "qcom,sc7180-mc-virt";
reg = <0 0x01638000 0 0x1000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

qup_virt: interconnect@1650000 {
compatible = "qcom,sc7180-qup-virt";
reg = <0 0x01650000 0 0x1000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sc7180-aggre1-noc";
reg = <0 0x016e0000 0 0x15080>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

aggre2_noc: interconnect@1705000 {
compatible = "qcom,sc7180-aggre2-noc";
reg = <0 0x01705000 0 0x9000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

compute_noc: interconnect@170e000 {
compatible = "qcom,sc7180-compute-noc";
reg = <0 0x0170e000 0 0x6000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

mmss_noc: interconnect@1740000 {
compatible = "qcom,sc7180-mmss-noc";
reg = <0 0x01740000 0 0x1c100>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

ipa_virt: interconnect@1e00000 {
compatible = "qcom,sc7180-ipa-virt";
reg = <0 0x01e00000 0 0x1000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

@@ -1406,9 +1406,9 @@ ipa: ipa@1e40000 {
clocks = <&rpmhcc RPMH_IPA_CLK>;
clock-names = "core";

- interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
- <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
+ interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+ <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
interconnect-names = "memory",
"imem",
"config";
@@ -1899,7 +1899,7 @@ gpu: gpu@5000000 {
operating-points-v2 = <&gpu_opp_table>;
qcom,gmu = <&gmu>;

- interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>;
+ interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "gfx-mem";

gpu_opp_table: opp-table {
@@ -2565,8 +2565,8 @@ qspi: spi@88dc000 {
clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
<&gcc GCC_QSPI_CORE_CLK>;
clock-names = "iface", "core";
- interconnects = <&gem_noc MASTER_APPSS_PROC
- &config_noc SLAVE_QSPI_0>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC 0
+ &config_noc SLAVE_QSPI_0 0>;
interconnect-names = "qspi-config";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qspi_opp_table>;
@@ -2625,7 +2625,7 @@ usb_1_ssphy: phy@88e9200 {
dc_noc: interconnect@9160000 {
compatible = "qcom,sc7180-dc-noc";
reg = <0 0x09160000 0 0x03200>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

@@ -2639,14 +2639,14 @@ system-cache-controller@9200000 {
gem_noc: interconnect@9680000 {
compatible = "qcom,sc7180-gem-noc";
reg = <0 0x09680000 0 0x3e200>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

npu_noc: interconnect@9990000 {
compatible = "qcom,sc7180-npu-noc";
reg = <0 0x09990000 0 0x1600>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

@@ -2682,8 +2682,8 @@ usb_1: usb@a6f8800 {

resets = <&gcc GCC_USB30_PRIM_BCR>;

- interconnects = <&aggre2_noc MASTER_USB3 &mc_virt SLAVE_EBI1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3>;
+ interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";

usb_1_dwc3: dwc3@a600000 {
@@ -2715,8 +2715,8 @@ venus: video-codec@aa00000 {
"vcodec0_core", "vcodec0_bus";
iommus = <&apps_smmu 0x0c00 0x60>;
memory-region = <&venus_mem>;
- interconnects = <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_VENUS_CFG>;
+ interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
interconnect-names = "video-mem", "cpu-cfg";

video-decoder {
@@ -2741,7 +2741,7 @@ videocc: clock-controller@ab00000 {
camnoc_virt: interconnect@ac00000 {
compatible = "qcom,sc7180-camnoc-virt";
reg = <0 0x0ac00000 0 0x1000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

Next message: Georgi Djakov: "[PATCH v3 3/7] interconnect: qcom: Implement xlate_extended() to parse tags"
Previous message: Dmitry Osipenko: "Re: [PATCH v3 05/22] i2c: tegra: Use reset_control_reset()"
In reply to: Georgi Djakov: "[PATCH v3 5/7] arm64: dts: qcom: sdm845: Increase the number of interconnect cells"
Next in thread: Georgi Djakov: "[PATCH v3 3/7] interconnect: qcom: Implement xlate_extended() to parse tags"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]