Re: [PATCH v3 1/2] media: i2c: ov772x: Add support for BT656 mode

[Jacopo Mondi]

Hi Prabhakar,

On Mon, Aug 24, 2020 at 08:04:05PM +0100, Lad Prabhakar wrote:
> Add support to read the bus-type and enable BT656 mode if needed.
>
> Also fail probe if unsupported bus_type is detected.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>

Looks good to me
Reviewed-by: Jacopo Mondi <jacopo@xxxxxxxxxx>

Thanks
  j

> ---
>  drivers/media/i2c/ov772x.c | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
>
> diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> index 2cc6a678069a..67764d647526 100644
> --- a/drivers/media/i2c/ov772x.c
> +++ b/drivers/media/i2c/ov772x.c
> @@ -31,6 +31,7 @@
>  #include <media/v4l2-ctrls.h>
>  #include <media/v4l2-device.h>
>  #include <media/v4l2-event.h>
> +#include <media/v4l2-fwnode.h>
>  #include <media/v4l2-image-sizes.h>
>  #include <media/v4l2-subdev.h>
>
> @@ -434,6 +435,7 @@ struct ov772x_priv {
>  #ifdef CONFIG_MEDIA_CONTROLLER
>  	struct media_pad pad;
>  #endif
> +	struct v4l2_fwnode_endpoint ep;
>  };
>
>  /*
> @@ -581,6 +583,13 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
>  	if (priv->streaming == enable)
>  		goto done;
>
> +	if (priv->ep.bus_type == V4L2_MBUS_BT656) {
> +		ret = regmap_update_bits(priv->regmap, COM7, ITU656_ON_OFF,
> +					 enable ? ITU656_ON_OFF : ~ITU656_ON_OFF);
> +		if (ret)
> +			goto done;
> +	}
> +
>  	ret = regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE,
>  				 enable ? 0 : SOFT_SLEEP_MODE);
>  	if (ret)
> @@ -1354,6 +1363,7 @@ static const struct v4l2_subdev_ops ov772x_subdev_ops = {
>
>  static int ov772x_probe(struct i2c_client *client)
>  {
> +	struct fwnode_handle *endpoint;
>  	struct ov772x_priv	*priv;
>  	int			ret;
>  	static const struct regmap_config ov772x_regmap_config = {
> @@ -1415,6 +1425,28 @@ static int ov772x_probe(struct i2c_client *client)
>  		goto error_clk_put;
>  	}
>
> +	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev),
> +						  NULL);
> +	if (!endpoint) {
> +		dev_err(&client->dev, "endpoint node not found\n");
> +		ret = -EINVAL;
> +		goto error_clk_put;
> +	}
> +
> +	ret = v4l2_fwnode_endpoint_parse(endpoint, &priv->ep);
> +	fwnode_handle_put(endpoint);
> +	if (ret) {
> +		dev_err(&client->dev, "Could not parse endpoint\n");
> +		goto error_clk_put;
> +	}
> +
> +	if (priv->ep.bus_type != V4L2_MBUS_PARALLEL &&
> +	    priv->ep.bus_type != V4L2_MBUS_BT656) {
> +		dev_err(&client->dev, "Unsupported bus type %d\n",
> +			priv->ep.bus_type);
> +		goto error_clk_put;
> +	}
> +
>  	ret = ov772x_video_probe(priv);
>  	if (ret < 0)
>  		goto error_gpio_put;
> --
> 2.17.1
>