[PATCH 5/6] arm64: dts: qcom: qrb5165-rb5: Add gpio-line-names for TLMM block

[Manivannan Sadhasivam]

Add gpio-line-names property for QRB5165 RB5 board for naming all GPIOs
exposed by TLMM block.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 181 +++++++++++++++++++++++
 1 file changed, 181 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 312316e23298..cf6dc0ec1640 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -431,6 +431,187 @@
 
 &tlmm {
 	gpio-reserved-ranges = <40 4>;
+	gpio-line-names =
+		"GPIO-MM",
+		"GPIO-NN",
+		"GPIO-OO",
+		"GPIO-PP",
+		"GPIO-A",
+		"GPIO-C",
+		"GPIO-E",
+		"GPIO-D",
+		"I2C0-SDA",
+		"I2C0-SCL",
+		"GPIO-TT", /* GPIO_10 */
+		"NC",
+		"GPIO_12_I2C_SDA",
+		"GPIO_13_I2C_SCL",
+		"GPIO-X",
+		"GPIO_15_RGMII_INT",
+		"HST_BT_UART_CTS",
+		"HST_BT_UART_RFR",
+		"HST_BT_UART_TX",
+		"HST_BT_UART_RX",
+		"HST_WLAN_EN", /* GPIO_20 */
+		"HST_BT_EN",
+		"GPIO-AAA",
+		"GPIO-BBB",
+		"GPIO-CCC",
+		"GPIO-Z",
+		"GPIO-DDD",
+		"GPIO-BB",
+		"GPIO_28_CAN_SPI_MISO",
+		"GPIO_29_CAN_SPI_MOSI",
+		"GPIO_30_CAN_SPI_CLK", /* GPIO_30 */
+		"GPIO_31_CAN_SPI_CS",
+		"GPIO-UU",
+		"NC",
+		"UART1_TXD_SOM",
+		"UART1_RXD_SOM",
+		"UART0_CTS",
+		"UART0_RTS",
+		"UART0_TXD",
+		"UART0_RXD",
+		"SPI1_MISO", /* GPIO_40 */
+		"SPI1_MOSI",
+		"SPI1_CLK",
+		"SPI1_CS",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"GPIO-F",
+		"GPIO-JJ",
+		"Board_ID1",
+		"Board_ID2",
+		"NC", /* GPIO_50 */
+		"NC",
+		"SPI0_MISO",
+		"SPI0_MOSI",
+		"SPI0_SCLK",
+		"SPI0_CS",
+		"GPIO-QQ",
+		"GPIO-RR",
+		"USB2LAN_RESET",
+		"USB2LAN_EXTWAKE",
+		"NC", /* GPIO_60 */
+		"NC",
+		"NC",
+		"LT9611_INT",
+		"GPIO-AA",
+		"USB_CC_DIR",
+		"GPIO-G",
+		"GPIO-LL",
+		"USB_DP_HPD_1P8",
+		"NC",
+		"NC", /* GPIO_70 */
+		"SD_CMD",
+		"SD_DAT3",
+		"SD_SCLK",
+		"SD_DAT2",
+		"SD_DAT1",
+		"SD_DAT0", /* BOOT_CFG3 */
+		"SD_UFS_CARD_DET_N",
+		"GPIO-II",
+		"PCIE0_RST_N",
+		"PCIE0_CLK_REQ_N", /* GPIO_80 */
+		"PCIE0_WAKE_N",
+		"GPIO-CC",
+		"GPIO-DD",
+		"GPIO-EE",
+		"GPIO-FF",
+		"GPIO-GG",
+		"GPIO-HH",
+		"GPIO-VV",
+		"GPIO-WW",
+		"NC", /* GPIO_90 */
+		"NC",
+		"GPIO-K",
+		"GPIO-I",
+		"CSI0_MCLK",
+		"CSI1_MCLK",
+		"CSI2_MCLK",
+		"CSI3_MCLK",
+		"GPIO-AA", /* CSI4_MCLK */
+		"GPIO-BB", /* CSI5_MCLK */
+		"GPIO-KK", /* GPIO_100 */
+		"CCI_I2C_SDA0",
+		"CCI_I2C_SCL0",
+		"CCI_I2C_SDA1",
+		"CCI_I2C_SCL1",
+		"CCI_I2C_SDA2",
+		"CCI_I2C_SCL2",
+		"CCI_I2C_SDA3",
+		"CCI_I2C_SCL3",
+		"GPIO-L",
+		"NC", /* GPIO_110 */
+		"NC",
+		"ACCEL_INT",
+		"GYRO_INT",
+		"GPIO-J",
+		"GPIO-YY",
+		"GPIO-H",
+		"GPIO-ZZ",
+		"NC",
+		"NC",
+		"NC", /* GPIO_120 */
+		"NC",
+		"MAG_INT",
+		"MAG_DRDY_INT",
+		"HST_SW_CTRL",
+		"GPIO-M",
+		"GPIO-N",
+		"GPIO-O",
+		"GPIO-P",
+		"PS_INT",
+		"WSA1_EN", /* GPIO_130 */
+		"USB_HUB_RESET",
+		"SDM_FORCE_USB_BOOT",
+		"I2S1_CLK_HDMI",
+		"I2S1_DATA0_HDMI",
+		"I2S1_WS_HDMI",
+		"GPIO-B",
+		"GPIO_137", /* To LT9611_I2S_MCLK_3V3 */
+		"PCM_CLK",
+		"PCM_DI",
+		"PCM_DO", /* GPIO_140 */
+		"PCM_FS",
+		"HST_SLIM_CLK",
+		"HST_SLIM_DATA",
+		"GPIO-U",
+		"GPIO-Y",
+		"GPIO-R",
+		"GPIO-Q",
+		"GPIO-S",
+		"GPIO-T",
+		"GPIO-V", /* GPIO_150 */
+		"GPIO-W",
+		"DMIC_CLK1",
+		"DMIC_DATA1",
+		"DMIC_CLK2",
+		"DMIC_DATA2",
+		"WSA_SWR_CLK",
+		"WSA_SWR_DATA",
+		"DMIC_CLK3",
+		"DMIC_DATA3",
+		"I2C4_SDA", /* GPIO_160 */
+		"I2C4_SCL",
+		"SPI3_CS1",
+		"SPI3_CS2",
+		"SPI2_MISO_LS3",
+		"SPI2_MOSI_LS3",
+		"SPI2_CLK_LS3",
+		"SPI2_ACCEL_CS_LS3",
+		"SPI2_CS1",
+		"NC",
+		"GPIO-SS", /* GPIO_170 */
+		"GPIO-XX",
+		"SPI3_MISO",
+		"SPI3_MOSI",
+		"SPI3_CLK",
+		"SPI3_CS",
+		"HST_BLE_SNS_UART_TX",
+		"HST_BLE_SNS_UART_RX",
+		"HST_WLAN_UART_TX",
+		"HST_WLAN_UART_RX";
 };
 
 &uart12 {
-- 
2.17.1