[PATCH 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw

[Grygorii Strashko]

Hi All,

arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes

This series adds DT nodes for TI J7200 SoC
- INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible
  with J721E Soc, to enable DMA support
- MCU CPSW2g DT nodes to enable networking

This series depends on:
 - [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform [1]
   from: Lokesh Vutla <lokeshvutla@xxxxxx>
 - [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2]
   from: Peter Ujfalusi <peter.ujfalusi@xxxxxx>

[1] https://lore.kernel.org/linux-arm-kernel/20200827065144.17683-1-lokeshvutla@xxxxxx/T/#m141ae4d0dd818518c00c81806d689983d6e832e6
[2] https://lore.kernel.org/patchwork/patch/1283230/

Grygorii Strashko (3):
  arm64: dts: ti: k3-j7200-main: add main navss cpts node
  arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
  arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux
    and phy defs

Peter Ujfalusi (1):
  arm64: dts: ti: k3-j7200: add DMA support

 .../dts/ti/k3-j7200-common-proc-board.dts     |  45 +++++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  73 +++++++++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 118 ++++++++++++++++++
 3 files changed, 236 insertions(+)

-- 
2.17.1