[PATCH v4 07/31] i2c: tegra: Use reset_control_reset()

[Dmitry Osipenko]

Use a single reset_control_reset() instead of assert/deasset couple in
order to make code cleaner a tad. Note that the reset_control_reset()
uses 1 microsecond delay instead of 2 that was used previously, but this
shouldn't matter. In addition don't ignore potential error of the reset
control by emitting a noisy warning if it fails, which shouldn't ever
happen in practice.

Reviewed-by: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 drivers/i2c/busses/i2c-tegra.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 2f74bdd75e1c..940b5f15ef11 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -785,9 +785,8 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 	u32 tsu_thd;
 	u8 tlow, thigh;
 
-	reset_control_assert(i2c_dev->rst);
-	udelay(2);
-	reset_control_deassert(i2c_dev->rst);
+	err = reset_control_reset(i2c_dev->rst);
+	WARN_ON_ONCE(err);
 
 	if (i2c_dev->is_dvc)
 		tegra_dvc_init(i2c_dev);
-- 
2.27.0