Re: [PATCH v2 04/12] phy: tegra: xusb: t210: add lane_iddq operations

From: JC Kuo
Date: Sun Sep 06 2020 - 22:26:36 EST

Next message: Penghao: "[PATCH v4] USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook"
Previous message: Xiaoliang Pang: "[PATCH v3] cypto: mediatek - fix leaks in mtk_desc_ring_alloc"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Thierry,
Thanks for review. I will amend accordingly and submit a new patch.

JC

On 8/31/20 7:53 PM, Thierry Reding wrote:
> On Mon, Aug 31, 2020 at 12:40:35PM +0800, JC Kuo wrote:
>> As per Tegra210 TRM, before changing lane assignments, driver should
>> keep lanes in IDDQ and sleep state; after changing lane assignments,
>> driver should bring lanes out of IDDQ.
>> This commit implements the required operations.
>>
>> Signed-off-by: JC Kuo <jckuo@xxxxxxxxxx>
>> ---
>> drivers/phy/tegra/xusb-tegra210.c | 94 +++++++++++++++++++++++++++++++
>> drivers/phy/tegra/xusb.c | 6 ++
>> drivers/phy/tegra/xusb.h | 4 +-
>> 3 files changed, 103 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
>> index 3a2d9797fb9f..fe1ab440424d 100644
>> --- a/drivers/phy/tegra/xusb-tegra210.c
>> +++ b/drivers/phy/tegra/xusb-tegra210.c
>> @@ -198,6 +198,18 @@
>> #define XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_TERM_EN BIT(18)
>> #define XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_MODE_OVRD BIT(13)
>>
>> +#define XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL2(x) (0x464 + (x) * 0x40)
>> +#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_IDDQ BIT(0)
>> +#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_IDDQ_OVRD BIT(1)
>> +#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_SLEEP_MASK (0x3 << 4)
>> +#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_SLEEP_VAL (0x3 << 4)
>> +#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_PWR_OVRD BIT(24)
>> +#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_IDDQ BIT(8)
>> +#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_IDDQ_OVRD BIT(9)
>> +#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_SLEEP_MASK (0x3 << 12)
>> +#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_SLEEP_VAL (0x3 << 12)
>> +#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_PWR_OVRD BIT(25)
>> +
>> #define XUSB_PADCTL_UPHY_PLL_S0_CTL1 0x860
>>
>> #define XUSB_PADCTL_UPHY_PLL_S0_CTL2 0x864
>> @@ -209,6 +221,7 @@
>> #define XUSB_PADCTL_UPHY_PLL_S0_CTL8 0x87c
>>
>> #define XUSB_PADCTL_UPHY_MISC_PAD_S0_CTL1 0x960
>> +#define XUSB_PADCTL_UPHY_MISC_PAD_S0_CTL2 0x964
>>
>> #define XUSB_PADCTL_UPHY_USB3_PADX_ECTL1(x) (0xa60 + (x) * 0x40)
>> #define XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_SHIFT 16
>> @@ -1636,6 +1649,63 @@ static const struct tegra_xusb_pad_soc tegra210_hsic_pad = {
>> .ops = &tegra210_hsic_ops,
>> };
>>
>> +static void
>> +tegra210_uphy_lane_iddq_enable(struct tegra_xusb_padctl *padctl, unsigned lane)
>> +{
>> + u32 val, offset;
>> +
>> + if (lane <= 6)
>> + offset = XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL2(lane);
>> + else if (lane == 7)
>> + offset = XUSB_PADCTL_UPHY_MISC_PAD_S0_CTL2;
>> + else {
>> + WARN(true, "invalid lane %u\n", lane);
>> + return;
>> + }
>> +
>> + val = padctl_readl(padctl, offset);
>> + val |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_IDDQ_OVRD;
>> + val |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_IDDQ_OVRD;
>> + val |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_PWR_OVRD;
>> + val |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_PWR_OVRD;
>> + val |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_IDDQ;
>> + val &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_SLEEP_MASK;
>> + val |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_SLEEP_VAL;
>> + val |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_IDDQ;
>> + val &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_SLEEP_MASK;
>> + val |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_SLEEP_VAL;
>> + padctl_writel(padctl, val, offset);
>> +}
>> +
>> +static void
>> +tegra210_uphy_lane_iddq_disable(struct tegra_xusb_padctl *padctl, unsigned lane)
>> +{
>> + u32 val, offset;
>> +
>> + if (lane <= 6)
>> + offset = XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL2(lane);
>> + else if (lane == 7)
>> + offset = XUSB_PADCTL_UPHY_MISC_PAD_S0_CTL2;
>> + else {
>> + WARN(true, "invalid lane %d\n", lane);
>> + return;
>> + }
>> +
>> + val = padctl_readl(padctl, offset);
>> + val &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_IDDQ_OVRD;
>> + val &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_IDDQ_OVRD;
>> + val &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_PWR_OVRD;
>> + val &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_PWR_OVRD;
>> + val |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_IDDQ;
>> + val &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_SLEEP_MASK;
>> + val |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_SLEEP_VAL;
>> + val |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_IDDQ;
>> + val &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_SLEEP_MASK;
>> + val |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_SLEEP_VAL;
>> + padctl_writel(padctl, val, offset);
>> +}
>> +
>> +
>> static const char *tegra210_pcie_functions[] = {
>> "pcie-x1",
>> "usb3-ss",
>> @@ -1808,9 +1878,21 @@ static void tegra210_pcie_lane_remove(struct tegra_xusb_lane *lane)
>> kfree(pcie);
>> }
>>
>> +static void tegra210_pcie_lane_iddq_enable(struct tegra_xusb_lane *lane)
>> +{
>> + tegra210_uphy_lane_iddq_enable(lane->pad->padctl, lane->index);
>> +}
>> +
>> +static void tegra210_pcie_lane_iddq_disable(struct tegra_xusb_lane *lane)
>> +{
>> + tegra210_uphy_lane_iddq_disable(lane->pad->padctl, lane->index);
>> +}
>> +
>> static const struct tegra_xusb_lane_ops tegra210_pcie_lane_ops = {
>> .probe = tegra210_pcie_lane_probe,
>> .remove = tegra210_pcie_lane_remove,
>> + .iddq_enable = tegra210_pcie_lane_iddq_enable,
>> + .iddq_disable = tegra210_pcie_lane_iddq_disable,
>> };
>>
>> static int tegra210_pcie_phy_init(struct phy *phy)
>> @@ -1971,9 +2053,21 @@ static void tegra210_sata_lane_remove(struct tegra_xusb_lane *lane)
>> kfree(sata);
>> }
>>
>> +static void tegra210_sata_lane_iddq_enable(struct tegra_xusb_lane *lane)
>> +{
>> + tegra210_uphy_lane_iddq_enable(lane->pad->padctl, lane->index + 7);
>> +}
>> +
>> +static void tegra210_sata_lane_iddq_disable(struct tegra_xusb_lane *lane)
>> +{
>> + tegra210_uphy_lane_iddq_disable(lane->pad->padctl, lane->index + 7);
>> +}
>
> This looks like abstraction at the wrong level. You introduce this
> arbtitrary offset 7 to differentiate between the two types, whereas what
> you really only seem to be after is to get the correct offset.
>
> Can't we instead make tegra210_uphy_lane_iddq_{enable,disable}() take
> the offset instead and push the logic to pick the offset into the
> callers? We could then have an extra helper that determines the offset
> from the lane if we want to avoid duplicating that logic.
>
> Or perhaps an even better way would be to store the offset to this MISC
> register in struct tegra_xusb_lane_soc? Something like this perhaps:
>
> struct tegra_xusb_lane_soc {
> ...
> struct {
> unsigned int misc;
> } regs;
> };
>
> That way we don't even have to go through two layers but instead can
> operate on the struct tegra_xusb_lane directly.
>
>> +
>> static const struct tegra_xusb_lane_ops tegra210_sata_lane_ops = {
>> .probe = tegra210_sata_lane_probe,
>> .remove = tegra210_sata_lane_remove,
>> + .iddq_enable = tegra210_sata_lane_iddq_enable,
>> + .iddq_disable = tegra210_sata_lane_iddq_disable,
>> };
>>
>> static int tegra210_sata_phy_init(struct phy *phy)
>> diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
>> index b48b590aa0c1..74abd67e3a31 100644
>> --- a/drivers/phy/tegra/xusb.c
>> +++ b/drivers/phy/tegra/xusb.c
>> @@ -321,11 +321,17 @@ static void tegra_xusb_lane_program(struct tegra_xusb_lane *lane)
>> if (soc->num_funcs < 2)
>> return;
>>
>> + if (lane->pad->ops->iddq_enable && lane->pad->ops->iddq_disable)
>> + lane->pad->ops->iddq_enable(lane);
>
> You can drop the second check because it isn't relevant here.
>
>> +
>> /* choose function */
>> value = padctl_readl(padctl, soc->offset);
>> value &= ~(soc->mask << soc->shift);
>> value |= lane->function << soc->shift;
>> padctl_writel(padctl, value, soc->offset);
>> +
>> + if (lane->pad->ops->iddq_enable && lane->pad->ops->iddq_disable)
>> + lane->pad->ops->iddq_disable(lane);
>
> Similarly, the first check can be dropped here because only the second
> is relevant. It might make sense to only support IDDQ if both callbacks
> are implemented, but that's not something we need to check at this
> level. The check here is only to avoid calling a NULL function. If you
> absolutely want to do sanity checks, do them at ->probe() time. But I
> don't think we need that here. It's up to the developer to get this
> right.
>
>> }
>>
>> static void tegra_xusb_pad_program(struct tegra_xusb_pad *pad)
>> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
>> index 0c828694cf2d..485b692a3b15 100644
>> --- a/drivers/phy/tegra/xusb.h
>> +++ b/drivers/phy/tegra/xusb.h
>> @@ -22,6 +22,7 @@ struct phy;
>> struct phy_provider;
>> struct platform_device;
>> struct regulator;
>> +struct tegra_xusb_padctl;
>>
>> /*
>> * lanes
>> @@ -126,6 +127,8 @@ struct tegra_xusb_lane_ops {
>> struct device_node *np,
>> unsigned int index);
>> void (*remove)(struct tegra_xusb_lane *lane);
>> + void (*iddq_enable)(struct tegra_xusb_lane *lane);
>> + void (*iddq_disable)(struct tegra_xusb_lane *lane);
>> };
>>
>> bool tegra_xusb_lane_check(struct tegra_xusb_lane *lane, const char *function);
>> @@ -134,7 +137,6 @@ bool tegra_xusb_lane_check(struct tegra_xusb_lane *lane, const char *function);
>> * pads
>> */
>> struct tegra_xusb_pad_soc;
>> -struct tegra_xusb_padctl;
>>
>> struct tegra_xusb_pad_ops {
>> struct tegra_xusb_pad *(*probe)(struct tegra_xusb_padctl *padctl,
>
> These last two hunks look like leftovers. I don't see why they are
> needed here.
>
> Thierry
>

Next message: Penghao: "[PATCH v4] USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook"
Previous message: Xiaoliang Pang: "[PATCH v3] cypto: mediatek - fix leaks in mtk_desc_ring_alloc"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]