Re: [PATCH] net: usb: qmi_wwan: Fix for packets being rejected in the ring buffer used by the xHCI controller.

[Daniele Palmas]

Hi Kristian and Bjørn,

Il giorno lun 7 set 2020 alle ore 09:45 Bjørn Mork <bjorn@xxxxxxx> ha scritto:
>
> Kristian Evensen <kristian.evensen@xxxxxxxxx> writes:
>
> > Hi all,
> >
> > I was able to trigger the same issue as reported by Paul, and came
> > across this patch (+ Daniele's other patch and thread on the libqmi
> > mailing list). Applying Paul's fix solved the problem for me, changing
> > the MTU of the QMI interface now works fine. Thanks a lot to everyone
> > involved!
> >
> > I just have one question, is there a specific reason for the patch not
> > being resubmitted or Daniele's work not resumed? I do not use any of
> > the aggregation-stuff, so I don't know how that is affected by for
> > example Paul's change. If there is anything I can do to help, please
> > let me know.
>
> Thanks for bringing this back into our collective memory.  The patch
> never made it to patchwork, probably due to the formatting issues, and
> was just forgotten.
>
> There are no other reasons than Daniele's concerns in the email you are
> replying to, AFAIK.  The issue pointed out by Paull should be fixed, but
> the fix must not break aggregation..
>
> This is a great opportunity for you to play with QMAP aggregation :-)
> Wouldn't it be good to do some measurements to document why it is such a
> bad idea?
>

there was also another recent thread about this and the final plan was
to simply increase the rx urb size setting to the highest value we are
aware of (see https://www.spinics.net/lists/linux-usb/msg198858.html):
this should solve the babble issue without breaking aggregation.

The change should be simple, I was just waiting to perform some sanity
tests with different models I have. Hope to have it done by this week.

Regards,
Daniele

>
> Bjørn
>