Re: [PATCH 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw

[Peter Ujfalusi]

Hi Grygorii,

On 05/09/2020 2.38, Grygorii Strashko wrote:
> Hi All,
> 
> arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes
> 
> This series adds DT nodes for TI J7200 SoC
> - INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible
>   with J721E Soc, to enable DMA support
> - MCU CPSW2g DT nodes to enable networking
> 
> This series depends on:
>  - [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform [1]
>    from: Lokesh Vutla <lokeshvutla@xxxxxx>
>  - [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2]
>    from: Peter Ujfalusi <peter.ujfalusi@xxxxxx>

you also need to pick:
[PATCH] dmaengine: ti: k3-udma: Use soc_device_match() for SoC dependent parameters [3]

> 
> [1] https://lore.kernel.org/linux-arm-kernel/20200827065144.17683-1-lokeshvutla@xxxxxx/T/#m141ae4d0dd818518c00c81806d689983d6e832e6
> [2] https://lore.kernel.org/patchwork/patch/1283230/

[3] https://lore.kernel.org/lkml/20200904120009.30941-1-peter.ujfalusi@xxxxxx/

> 
> Grygorii Strashko (3):
>   arm64: dts: ti: k3-j7200-main: add main navss cpts node
>   arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
>   arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux
>     and phy defs
> 
> Peter Ujfalusi (1):
>   arm64: dts: ti: k3-j7200: add DMA support
> 
>  .../dts/ti/k3-j7200-common-proc-board.dts     |  45 +++++++
>  arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  73 +++++++++++
>  .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 118 ++++++++++++++++++
>  3 files changed, 236 insertions(+)
> 

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki