Re: [PATCH v2 0/7] SM8150 and SM8250 dispcc drivers

[Dmitry Baryshkov]

On 04/09/2020 01:26, Jonathan Marek wrote:
> Add display clock drivers required to get DSI and DP displays working on
> SM8150 and SM8250 SoCs.
>
> Derived from downstream drivers. Notable changes compared to downstream:
>   - EDP clks removed (nothing uses these even in downstream it seems)
>   - freq_tbl values for dp_link clk is in Hz and not kHz


On SM8250:
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

> v2:
>   - updated dts example to reflect the change (first patch)
>   - updated config_ctl_hi1_val in sm8250 dispcc to latest downstream
>
> Jonathan Marek (7):
>    dt-bindings: clock: sdm845-dispcc: same name for dp_phy clocks as
>      sc7180
>    arm64: dts: qcom: sdm845-dispcc: same name for dp_phy clocks as sc7180
>    dt-bindings: clock: combine qcom,sdm845-dispcc and qcom,sc7180-dispcc
>    dt-bindings: clock: Introduce QCOM SM8150 display clock bindings
>    dt-bindings: clock: Introduce QCOM SM8250 display clock bindings
>    clk: qcom: Add display clock controller driver for SM8150
>    clk: qcom: Add display clock controller driver for SM8250
>
>   ...om,sdm845-dispcc.yaml => qcom,dispcc.yaml} |   30 +-
>   .../bindings/clock/qcom,sc7180-dispcc.yaml    |   86 --
>   arch/arm64/boot/dts/qcom/sdm845.dtsi          |    4 +-
>   drivers/clk/qcom/Kconfig                      |   18 +
>   drivers/clk/qcom/Makefile                     |    2 +
>   drivers/clk/qcom/dispcc-sm8150.c              | 1152 +++++++++++++++++
>   drivers/clk/qcom/dispcc-sm8250.c              | 1100 ++++++++++++++++
>   .../dt-bindings/clock/qcom,dispcc-sm8150.h    |   69 +
>   .../dt-bindings/clock/qcom,dispcc-sm8250.h    |   66 +
>   9 files changed, 2428 insertions(+), 99 deletions(-)
>   rename Documentation/devicetree/bindings/clock/{qcom,sdm845-dispcc.yaml => qcom,dispcc.yaml} (75%)
>   delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
>   create mode 100644 drivers/clk/qcom/dispcc-sm8150.c
>   create mode 100644 drivers/clk/qcom/dispcc-sm8250.c
>   create mode 100644 include/dt-bindings/clock/qcom,dispcc-sm8150.h
>   create mode 100644 include/dt-bindings/clock/qcom,dispcc-sm8250.h


--
With best wishes
Dmitry