[PATCH 11/11] ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416

[Krzysztof Kozlowski]

The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:

  clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
  clocks: #size-cells:0:0: 0 is not one of [1, 2]
  clocks: xti@0:reg:0: [0] is too short
  clocks: 'ranges' is a required property
  xti@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
 arch/arm/boot/dts/s3c2416-smdk2416.dts | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index 811bfdef4e9b..47626ede6fdd 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -17,18 +17,11 @@
 		reg =  <0x30000000 0x4000000>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		xti: xti@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			clock-frequency = <12000000>;
-			clock-output-names = "xti";
-			#clock-cells = <0>;
-		};
+	xti: clock-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+		clock-output-names = "xti";
+		#clock-cells = <0>;
 	};
 };
 
-- 
2.17.1