[PATCH next 5/6] ARM: dts: am57xx-cl-som-am57x: switch to new cpsw switch drv

[Grygorii Strashko]

Switch CompuLab CL-SOM-AM57x board to use new cpsw switch driver. Those
board configured in dual_mac mode by default. Hence, dual_mac mode has been
preserved the same way between legacy and new driver it's safe to switch
drivers.

Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
 arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 34ca761aeded..0d5fe2bfb683 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -546,27 +546,26 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_pins_default>;
 	pinctrl-1 = <&cpsw_pins_sleep>;
-	dual_emac;
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <0>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_pins_default>;
 	pinctrl-1 = <&davinci_mdio_pins_sleep>;
-- 
2.17.1