Re: [RFT 05/25] ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warnings

[Jonathan Bakker]

DMA still works for me on the Galaxy S.

Tested-by: Jonathan Bakker <xc-racer2@xxxxxxx>

Thanks,
Jonathan

On 2020-09-07 9:11 a.m., Krzysztof Kozlowski wrote:
> There is no need to keep DMA controller nodes under AMBA bus node.
> Remove the "amba" node to fix dtschema warnings like:
> 
>   amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/s5pv210.dtsi | 49 +++++++++++++++-------------------
>  1 file changed, 21 insertions(+), 28 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
> index 1b0ee884e91d..84e4447931de 100644
> --- a/arch/arm/boot/dts/s5pv210.dtsi
> +++ b/arch/arm/boot/dts/s5pv210.dtsi
> @@ -128,35 +128,28 @@
>  			};
>  		};
>  
> -		amba {
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> -			compatible = "simple-bus";
> -			ranges;
> -
> -			pdma0: dma@e0900000 {
> -				compatible = "arm,pl330", "arm,primecell";
> -				reg = <0xe0900000 0x1000>;
> -				interrupt-parent = <&vic0>;
> -				interrupts = <19>;
> -				clocks = <&clocks CLK_PDMA0>;
> -				clock-names = "apb_pclk";
> -				#dma-cells = <1>;
> -				#dma-channels = <8>;
> -				#dma-requests = <32>;
> -			};
> +		pdma0: dma@e0900000 {
> +			compatible = "arm,pl330", "arm,primecell";
> +			reg = <0xe0900000 0x1000>;
> +			interrupt-parent = <&vic0>;
> +			interrupts = <19>;
> +			clocks = <&clocks CLK_PDMA0>;
> +			clock-names = "apb_pclk";
> +			#dma-cells = <1>;
> +			#dma-channels = <8>;
> +			#dma-requests = <32>;
> +		};
>  
> -			pdma1: dma@e0a00000 {
> -				compatible = "arm,pl330", "arm,primecell";
> -				reg = <0xe0a00000 0x1000>;
> -				interrupt-parent = <&vic0>;
> -				interrupts = <20>;
> -				clocks = <&clocks CLK_PDMA1>;
> -				clock-names = "apb_pclk";
> -				#dma-cells = <1>;
> -				#dma-channels = <8>;
> -				#dma-requests = <32>;
> -			};
> +		pdma1: dma@e0a00000 {
> +			compatible = "arm,pl330", "arm,primecell";
> +			reg = <0xe0a00000 0x1000>;
> +			interrupt-parent = <&vic0>;
> +			interrupts = <20>;
> +			clocks = <&clocks CLK_PDMA1>;
> +			clock-names = "apb_pclk";
> +			#dma-cells = <1>;
> +			#dma-channels = <8>;
> +			#dma-requests = <32>;
>  		};
>  
>  		adc: adc@e1700000 {
>