Re: [PATCH v2 12/12] xhci: tegra: enable ELPG for runtime/system PM
From: JC Kuo
Date: Mon Sep 07 2020 - 22:29:28 EST
Hi Thierry,
Thanks for review. I will amend accordingly and submit a new revision.
JC
On 8/31/20 8:50 PM, Thierry Reding wrote:
> On Mon, Aug 31, 2020 at 12:40:43PM +0800, JC Kuo wrote:
>> This commit implements the complete programming sequence for ELPG
>> entry and exit.
>>
>> 1. At ELPG entry, invokes tegra_xusb_padctl_enable_phy_sleepwalk()
>> and tegra_xusb_padctl_enable_phy_wake() to configure XUSB PADCTL
>> sleepwalk and wake detection circuits to maintain USB lines level
>> and respond to wake events (wake-on-connect, wake-on-disconnect,
>> device-initiated-wake).
>>
>> 2. At ELPG exit, invokes tegra_xusb_padctl_disable_phy_sleepwalk()
>> and tegra_xusb_padctl_disable_phy_wake() to disarm sleepwalk and
>> wake detection circuits.
>>
>> At runtime suspend, XUSB host controller can enter ELPG to reduce
>> power consumption. When XUSB PADCTL wake detection circuit detects
>> a wake event, an interrupt will be raised. xhci-tegra driver then
>> will invoke pm_runtime_resume() for xhci-tegra.
>>
>> Runtime resume could also be triggered by protocol drivers, this is
>> the host-initiated-wake event. At runtime resume, xhci-tegra driver
>> brings XUSB host controller out of ELPG to handle the wake events.
>>
>> The same ELPG enter/exit procedure will be performed for system
>> suspend/resume path so USB devices can remain connected across SC7.
>>
>> Signed-off-by: JC Kuo <jckuo@xxxxxxxxxx>
>> ---
>> drivers/usb/host/xhci-tegra.c | 391 +++++++++++++++++++++++++++++++---
>> 1 file changed, 361 insertions(+), 30 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
>> index ce6526c2caf6..9530cfc83f45 100644
>> --- a/drivers/usb/host/xhci-tegra.c
>> +++ b/drivers/usb/host/xhci-tegra.c
>> @@ -15,9 +15,11 @@
>> #include <linux/kernel.h>
>> #include <linux/module.h>
>> #include <linux/of_device.h>
>> +#include <linux/of_irq.h>
>> #include <linux/phy/phy.h>
>> #include <linux/phy/tegra/xusb.h>
>> #include <linux/platform_device.h>
>> +#include <linux/usb/ch9.h>
>> #include <linux/pm.h>
>> #include <linux/pm_domain.h>
>> #include <linux/pm_runtime.h>
>> @@ -224,6 +226,7 @@ struct tegra_xusb {
>>
>> int xhci_irq;
>> int mbox_irq;
>> + int padctl_irq;
>>
>> void __iomem *ipfs_base;
>> void __iomem *fpci_base;
>> @@ -268,10 +271,13 @@ struct tegra_xusb {
>> dma_addr_t phys;
>> } fw;
>>
>> + bool suspended;
>> struct tegra_xusb_context context;
>> };
>>
>> static struct hc_driver __read_mostly tegra_xhci_hc_driver;
>> +static int tegra_xusb_exit_elpg(struct tegra_xusb *tegra, bool runtime);
>> +static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool runtime);
>>
>> static inline u32 fpci_readl(struct tegra_xusb *tegra, unsigned int offset)
>> {
>> @@ -657,6 +663,9 @@ static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data)
>>
>> mutex_lock(&tegra->lock);
>>
>> + if (pm_runtime_suspended(tegra->dev) || tegra->suspended)
>> + goto out;
>> +
>> value = fpci_readl(tegra, tegra->soc->mbox.data_out);
>> tegra_xusb_mbox_unpack(&msg, value);
>>
>> @@ -670,6 +679,7 @@ static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data)
>>
>> tegra_xusb_mbox_handle(tegra, &msg);
>>
>> +out:
>> mutex_unlock(&tegra->lock);
>> return IRQ_HANDLED;
>> }
>> @@ -812,12 +822,27 @@ static void tegra_xusb_phy_disable(struct tegra_xusb *tegra)
>>
>> static int tegra_xusb_runtime_suspend(struct device *dev)
>> {
>> - return 0;
>> + struct tegra_xusb *tegra = dev_get_drvdata(dev);
>> + int ret;
>> +
>> + synchronize_irq(tegra->mbox_irq);
>> + mutex_lock(&tegra->lock);
>> + ret = tegra_xusb_enter_elpg(tegra, true);
>> + mutex_unlock(&tegra->lock);
>> +
>> + return ret;
>> }
>>
>> static int tegra_xusb_runtime_resume(struct device *dev)
>> {
>> - return 0;
>> + struct tegra_xusb *tegra = dev_get_drvdata(dev);
>> + int err;
>> +
>> + mutex_lock(&tegra->lock);
>> + err = tegra_xusb_exit_elpg(tegra, true);
>> + mutex_unlock(&tegra->lock);
>> +
>> + return err;
>> }
>>
>> #ifdef CONFIG_PM_SLEEP
>> @@ -1121,6 +1146,22 @@ static int __tegra_xusb_enable_firmware_messages(struct tegra_xusb *tegra)
>> return err;
>> }
>>
>> +static irqreturn_t tegra_xusb_padctl_irq(int irq, void *data)
>> +{
>> + struct tegra_xusb *tegra = data;
>> +
>> + mutex_lock(&tegra->lock);
>> + if (tegra->suspended) {
>> + mutex_unlock(&tegra->lock);
>> + return IRQ_HANDLED;
>> + }
>> + mutex_unlock(&tegra->lock);
>
> Blank lines before and after a block can help make this less cluttered.
>
>> +
>> + pm_runtime_resume(tegra->dev);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> static int tegra_xusb_enable_firmware_messages(struct tegra_xusb *tegra)
>> {
>> int err;
>> @@ -1244,6 +1285,51 @@ static void tegra_xhci_id_work(struct work_struct *work)
>> }
>> }
>>
>> +static bool is_usb2_otg_phy(struct tegra_xusb *tegra, int index)
>
> unsigned int index?
>
>> +{
>> + return (tegra->usbphy[index] != NULL);
>> +}
>> +
>> +static bool is_usb3_otg_phy(struct tegra_xusb *tegra, int index)
>
> Here too.
>
>> +{
>> + struct tegra_xusb_padctl *padctl = tegra->padctl;
>> + int i, port;
>
> These can also be unsigned.
>
>> +
>> + for (i = 0; i < tegra->num_usb_phys; i++) {
>> + if (is_usb2_otg_phy(tegra, i)) {
>> + port = tegra_xusb_padctl_get_usb3_companion(padctl,i);
>
> Space after ",".
>
>> + if (index == port)
>> + return true;
>> + }
>> + }
>> +
>> + return false;
>> +}
>> +
>> +static bool is_host_mode_phy(struct tegra_xusb *tegra, int phy_type, int index)
>> +{
>> + if (strcmp(tegra->soc->phy_types[phy_type].name, "hsic") == 0)
>> + return true;
>> +
>> + if (strcmp(tegra->soc->phy_types[phy_type].name, "usb2") == 0) {
>> + if (is_usb2_otg_phy(tegra, index)) {
>> + return ((index == tegra->otg_usb2_port) &&
>> + tegra->host_mode);
>> + } else
>> + return true;
>> + }
>> +
>> + if (strcmp(tegra->soc->phy_types[phy_type].name, "usb3") == 0) {
>> + if (is_usb3_otg_phy(tegra, index)) {
>> + return ((index == tegra->otg_usb3_port) &&
>> + tegra->host_mode);
>> + } else
>> + return true;
>> + }
>> +
>> + return false;
>> +}
>> +
>> static int tegra_xusb_get_usb2_port(struct tegra_xusb *tegra,
>> struct usb_phy *usbphy)
>> {
>> @@ -1336,6 +1422,7 @@ static void tegra_xusb_deinit_usb_phy(struct tegra_xusb *tegra)
>> static int tegra_xusb_probe(struct platform_device *pdev)
>> {
>> struct tegra_xusb *tegra;
>> + struct device_node *np;
>> struct resource *regs;
>> struct xhci_hcd *xhci;
>> unsigned int i, j, k;
>> @@ -1383,6 +1470,14 @@ static int tegra_xusb_probe(struct platform_device *pdev)
>> if (IS_ERR(tegra->padctl))
>> return PTR_ERR(tegra->padctl);
>>
>> + np = of_parse_phandle(pdev->dev.of_node, "nvidia,xusb-padctl", 0);
>> + if (!np)
>> + return -ENODEV;
>> +
>> + tegra->padctl_irq = of_irq_get(np, 0);
>> + if (tegra->padctl_irq < 0)
>> + return tegra->padctl_irq;
>> +
>> tegra->host_clk = devm_clk_get(&pdev->dev, "xusb_host");
>> if (IS_ERR(tegra->host_clk)) {
>> err = PTR_ERR(tegra->host_clk);
>> @@ -1527,6 +1622,7 @@ static int tegra_xusb_probe(struct platform_device *pdev)
>> goto put_powerdomains;
>> }
>>
>> + tegra->hcd->skip_phy_initialization = 1;
>> tegra->hcd->regs = tegra->regs;
>> tegra->hcd->rsrc_start = regs->start;
>> tegra->hcd->rsrc_len = resource_size(regs);
>> @@ -1609,12 +1705,6 @@ static int tegra_xusb_probe(struct platform_device *pdev)
>> goto put_usb3;
>> }
>>
>> - err = tegra_xusb_enable_firmware_messages(tegra);
>> - if (err < 0) {
>> - dev_err(&pdev->dev, "failed to enable messages: %d\n", err);
>> - goto remove_usb3;
>> - }
>> -
>> err = devm_request_threaded_irq(&pdev->dev, tegra->mbox_irq,
>> tegra_xusb_mbox_irq,
>> tegra_xusb_mbox_thread, 0,
>> @@ -1624,12 +1714,40 @@ static int tegra_xusb_probe(struct platform_device *pdev)
>> goto remove_usb3;
>> }
>>
>> + err = devm_request_threaded_irq(&pdev->dev, tegra->padctl_irq,
>> + NULL,
>> + tegra_xusb_padctl_irq,
>> + IRQF_ONESHOT |
>> + IRQF_TRIGGER_HIGH,
>> + dev_name(&pdev->dev), tegra);
>
> The alignment here is off. Also, try to make good use of those 100
> columns.
>
>> + if (err < 0) {
>> + dev_err(&pdev->dev, "failed to request padctl IRQ: %d\n", err);
>> + goto remove_usb3;
>> + }
>> +
>> + err = tegra_xusb_enable_firmware_messages(tegra);
>> + if (err < 0) {
>> + dev_err(&pdev->dev, "failed to enable messages: %d\n", err);
>> + goto remove_usb3;
>> + }
>> +
>> err = tegra_xusb_init_usb_phy(tegra);
>> if (err < 0) {
>> dev_err(&pdev->dev, "failed to init USB PHY: %d\n", err);
>> goto remove_usb3;
>> }
>>
>> + /* Enable wake for both USB 2.0 and USB 3.0 roothubs */
>> + device_init_wakeup(&tegra->hcd->self.root_hub->dev, true);
>> + device_init_wakeup(&xhci->shared_hcd->self.root_hub->dev, true);
>> + device_init_wakeup(tegra->dev, true);
>> +
>> + pm_runtime_use_autosuspend(tegra->dev);
>> + pm_runtime_set_autosuspend_delay(tegra->dev, 2000);
>> + pm_runtime_mark_last_busy(tegra->dev);
>> + pm_runtime_set_active(tegra->dev);
>> + pm_runtime_enable(tegra->dev);
>> +
>> return 0;
>>
>> remove_usb3:
>> @@ -1665,6 +1783,7 @@ static int tegra_xusb_remove(struct platform_device *pdev)
>>
>> tegra_xusb_deinit_usb_phy(tegra);
>>
>> + pm_runtime_get_sync(&pdev->dev);
>> usb_remove_hcd(xhci->shared_hcd);
>> usb_put_hcd(xhci->shared_hcd);
>> xhci->shared_hcd = NULL;
>> @@ -1674,8 +1793,8 @@ static int tegra_xusb_remove(struct platform_device *pdev)
>> dma_free_coherent(&pdev->dev, tegra->fw.size, tegra->fw.virt,
>> tegra->fw.phys);
>>
>> - pm_runtime_put_sync(&pdev->dev);
>> pm_runtime_disable(&pdev->dev);
>> + pm_runtime_put(&pdev->dev);
>>
>> tegra_xusb_powergate_partitions(tegra);
>>
>> @@ -1717,9 +1836,17 @@ static bool xhci_hub_ports_suspended(struct xhci_hub *hub)
>> static int tegra_xusb_check_ports(struct tegra_xusb *tegra)
>> {
>> struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
>> + struct xhci_hub *rhub = xhci_get_rhub(xhci->main_hcd);
>> + struct xhci_bus_state *bus_state = &rhub->bus_state;
>> unsigned long flags;
>> int err = 0;
>>
>> + if (bus_state->bus_suspended) {
>> + /* xusb_hub_suspend() has just directed one or more USB2 port(s)
>> + * to U3 state, it takes 3ms to enter U3. */
>> + usleep_range(3000, 4000);
>> + }
>> +
>> spin_lock_irqsave(&xhci->lock, flags);
>>
>> if (!xhci_hub_ports_suspended(&xhci->usb2_rhub) ||
>> @@ -1765,45 +1892,184 @@ static void tegra_xusb_restore_context(struct tegra_xusb *tegra)
>> }
>> }
>>
>> -static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool wakeup)
>> +static enum usb_device_speed
>> +tegra_xhci_portsc_to_speed(struct tegra_xusb *tegra, u32 portsc)
>> +{
>> + if (DEV_LOWSPEED(portsc))
>> + return USB_SPEED_LOW;
>> + else if (DEV_HIGHSPEED(portsc))
>> + return USB_SPEED_HIGH;
>> + else if (DEV_FULLSPEED(portsc))
>> + return USB_SPEED_FULL;
>> + else if (DEV_SUPERSPEED_ANY(portsc))
>> + return USB_SPEED_SUPER;
>> + else
>> + return USB_SPEED_UNKNOWN;
>> +}
>
> As in a prior patch you can make this simpler by dropping the elses.
>
>> +
>> +static void tegra_xhci_enable_phy_sleepwalk_wake(struct tegra_xusb *tegra)
>> +{
>> + struct tegra_xusb_padctl *padctl = tegra->padctl;
>> + struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
>> + enum usb_device_speed speed;
>> + struct phy *phy;
>> + int index, offset;
>> + int i, j, k;
>
> It looks like these can all be unsigned int.
>
>> + struct xhci_hub *rhub;
>> + u32 portsc;
>> +
>> + for (i = 0, k = 0; i < tegra->soc->num_types; i++) {
>> + if (strcmp(tegra->soc->phy_types[i].name, "usb3") == 0)
>> + rhub = &xhci->usb3_rhub;
>> + else
>> + rhub = &xhci->usb2_rhub;
>> +
>> + if (strcmp(tegra->soc->phy_types[i].name, "hsic") == 0)
>> + offset = tegra->soc->ports.usb2.count;
>> + else
>> + offset = 0;
>> +
>> + for (j = 0; j < tegra->soc->phy_types[i].num; j++) {
>> + phy = tegra->phys[k++];
>> +
>> + if (!phy)
>> + continue;
>> +
>> + index = j + offset;
>> +
>> + if (index >= rhub->num_ports)
>> + continue;
>> +
>> + if (!is_host_mode_phy(tegra, i, j))
>> + continue;
>> +
>> + portsc = readl(rhub->ports[index]->addr);
>> + speed = tegra_xhci_portsc_to_speed(tegra, portsc);
>> + tegra_xusb_padctl_enable_phy_sleepwalk(padctl, phy,
>> + speed);
>> + tegra_xusb_padctl_enable_phy_wake(padctl, phy);
>> + }
>> + }
>> +}
>> +
>> +static void tegra_xhci_disable_phy_wake(struct tegra_xusb *tegra)
>> +{
>> + struct tegra_xusb_padctl *padctl = tegra->padctl;
>> + int i;
>
> Same here.
>
>> +
>> + for (i = 0; i < tegra->num_phys; i++) {
>> + if (!tegra->phys[i])
>> + continue;
>> +
>> + tegra_xusb_padctl_disable_phy_wake(padctl, tegra->phys[i]);
>> + }
>> +}
>> +
>> +static void tegra_xhci_disable_phy_sleepwalk(struct tegra_xusb *tegra)
>> +{
>> + struct tegra_xusb_padctl *padctl = tegra->padctl;
>> + int i;
>
> And here.
>
>> +
>> + for (i = 0; i < tegra->num_phys; i++) {
>> + if (!tegra->phys[i])
>> + continue;
>> +
>> + tegra_xusb_padctl_disable_phy_sleepwalk(padctl, tegra->phys[i]);
>> + }
>> +}
>> +
>> +static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool runtime)
>> {
>> struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
>> + struct device *dev = tegra->dev;
>> + bool wakeup = runtime ? true : device_may_wakeup(dev);
>> + unsigned int i;
>> int err;
>> + u32 usbcmd;
>> +
>> + dev_dbg(dev, "entering ELPG\n");
>> +
>> + usbcmd = readl(&xhci->op_regs->command);
>> + usbcmd &= ~CMD_EIE;
>> + writel(usbcmd, &xhci->op_regs->command);
>>
>> err = tegra_xusb_check_ports(tegra);
>> if (err < 0) {
>> dev_err(tegra->dev, "not all ports suspended: %d\n", err);
>> - return err;
>> + goto out;
>> }
>>
>> err = xhci_suspend(xhci, wakeup);
>> if (err < 0) {
>> dev_err(tegra->dev, "failed to suspend XHCI: %d\n", err);
>> - return err;
>> + goto out;
>> }
>>
>> tegra_xusb_save_context(tegra);
>> - tegra_xusb_phy_disable(tegra);
>> +
>> + if (wakeup)
>> + tegra_xhci_enable_phy_sleepwalk_wake(tegra);
>> +
>> + tegra_xusb_powergate_partitions(tegra);
>> +
>> + for (i = 0; i < tegra->num_phys; i++) {
>> + if (!tegra->phys[i])
>> + continue;
>> +
>> + phy_power_off(tegra->phys[i]);
>> + if (!wakeup)
>> + phy_exit(tegra->phys[i]);
>> + }
>> tegra_xusb_clk_disable(tegra);
>
> Use blank lines to separate blocks of code.
>
>>
>> - return 0;
>> +out:
>> + if (!err)
>> + dev_dbg(tegra->dev, "entering ELPG done\n");
>> + else {
>> + usbcmd = readl(&xhci->op_regs->command);
>> + usbcmd |= CMD_EIE;
>> + writel(usbcmd, &xhci->op_regs->command);
>> +
>> + dev_dbg(tegra->dev, "entering ELPG failed\n");
>> + pm_runtime_mark_last_busy(tegra->dev);
>> + }
>> +
>> + return err;
>> }
>>
>> -static int tegra_xusb_exit_elpg(struct tegra_xusb *tegra, bool wakeup)
>> +static int tegra_xusb_exit_elpg(struct tegra_xusb *tegra, bool runtime)
>> {
>> struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
>> + struct device *dev = tegra->dev;
>> + bool wakeup = runtime ? true : device_may_wakeup(dev);
>> + unsigned int i;
>> + u32 usbcmd;
>> int err;
>>
>> + dev_dbg(dev, "exiting ELPG\n");
>> + pm_runtime_mark_last_busy(tegra->dev);
>> +
>> err = tegra_xusb_clk_enable(tegra);
>> if (err < 0) {
>> dev_err(tegra->dev, "failed to enable clocks: %d\n", err);
>> - return err;
>> + goto out;
>> }
>>
>> - err = tegra_xusb_phy_enable(tegra);
>> - if (err < 0) {
>> - dev_err(tegra->dev, "failed to enable PHYs: %d\n", err);
>> - goto disable_clk;
>> + err = tegra_xusb_unpowergate_partitions(tegra);
>> + if (err)
>> + goto disable_clks;
>> +
>> + if (wakeup)
>> + tegra_xhci_disable_phy_wake(tegra);
>> +
>> + for (i = 0; i < tegra->num_phys; i++) {
>> + if (!tegra->phys[i])
>> + continue;
>> +
>> + if (!wakeup)
>> + phy_init(tegra->phys[i]);
>> +
>> + phy_power_on(tegra->phys[i]);
>> }
>>
>> tegra_xusb_config(tegra);
>> @@ -1821,31 +2087,78 @@ static int tegra_xusb_exit_elpg(struct tegra_xusb *tegra, bool wakeup)
>> goto disable_phy;
>> }
>>
>> - err = xhci_resume(xhci, true);
>> + if (wakeup)
>> + tegra_xhci_disable_phy_sleepwalk(tegra);
>> +
>> + err = xhci_resume(xhci, 0);
>> if (err < 0) {
>> dev_err(tegra->dev, "failed to resume XHCI: %d\n", err);
>> goto disable_phy;
>> }
>>
>> - return 0;
>> + usbcmd = readl(&xhci->op_regs->command);
>> + usbcmd |= CMD_EIE;
>> + writel(usbcmd, &xhci->op_regs->command);
>> +
>> + goto out;
>>
>> disable_phy:
>> - tegra_xusb_phy_disable(tegra);
>> -disable_clk:
>> + for (i = 0; i < tegra->num_phys; i++) {
>> + if (!tegra->phys[i])
>> + continue;
>> +
>> + phy_power_off(tegra->phys[i]);
>> + if (!wakeup)
>> + phy_exit(tegra->phys[i]);
>> + }
>> + tegra_xusb_powergate_partitions(tegra);
>> +disable_clks:
>> tegra_xusb_clk_disable(tegra);
>> +out:
>> + if (!err)
>> + dev_dbg(dev, "exiting ELPG done\n");
>> + else
>> + dev_dbg(dev, "exiting ELPG failed\n");
>> +
>> return err;
>> }
>>
>> static int tegra_xusb_suspend(struct device *dev)
>> {
>> struct tegra_xusb *tegra = dev_get_drvdata(dev);
>> - bool wakeup = device_may_wakeup(dev);
>> int err;
>>
>> synchronize_irq(tegra->mbox_irq);
>> -
>
> I think that blank line actually helped with readability.
>
> Thierry
>
>> mutex_lock(&tegra->lock);
>> - err = tegra_xusb_enter_elpg(tegra, wakeup);
>> +
>> + if (pm_runtime_suspended(dev)) {
>> + err = tegra_xusb_exit_elpg(tegra, true);
>> + if (err < 0)
>> + goto out;
>> + }
>> +
>> + err = tegra_xusb_enter_elpg(tegra, false);
>> + if (err < 0) {
>> + if (pm_runtime_suspended(dev)) {
>> + pm_runtime_disable(dev);
>> + pm_runtime_set_active(dev);
>> + pm_runtime_enable(dev);
>> + }
>> +
>> + goto out;
>> + }
>> +
>> +out:
>> + if (!err) {
>> + tegra->suspended = true;
>> + pm_runtime_disable(dev);
>> +
>> + if (device_may_wakeup(dev)) {
>> + if (enable_irq_wake(tegra->padctl_irq))
>> + dev_err(dev, "failed to enable padctl wakes\n");
>> + }
>> + }
>> +
>> mutex_unlock(&tegra->lock);
>>
>> return err;
>> @@ -1854,14 +2167,32 @@ static int tegra_xusb_suspend(struct device *dev)
>> static int tegra_xusb_resume(struct device *dev)
>> {
>> struct tegra_xusb *tegra = dev_get_drvdata(dev);
>> - bool wakeup = device_may_wakeup(dev);
>> int err;
>>
>> mutex_lock(&tegra->lock);
>> - err = tegra_xusb_exit_elpg(tegra, wakeup);
>> +
>> + if (!tegra->suspended) {
>> + mutex_unlock(&tegra->lock);
>> + return 0;
>> + }
>> +
>> + err = tegra_xusb_exit_elpg(tegra, false);
>> + if (err < 0) {
>> + mutex_unlock(&tegra->lock);
>> + return err;
>> + }
>> +
>> + if (device_may_wakeup(dev)) {
>> + if (disable_irq_wake(tegra->padctl_irq))
>> + dev_err(dev, "failed to disable padctl wakes\n");
>> + }
>> + tegra->suspended = false;
>> mutex_unlock(&tegra->lock);
>>
>> - return err;
>> + pm_runtime_set_active(dev);
>> + pm_runtime_enable(dev);
>> +
>> + return 0;
>> }
>> #endif
>>
>> --
>> 2.25.1
>>