[PATCH v2 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw

From: Grygorii Strashko
Date: Tue Sep 08 2020 - 13:00:10 EST

Hi All,

arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes

This series adds DT nodes for TI J7200 SoC
- INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible
with J721E Soc, to enable DMA support
- MCU CPSW2g DT nodes to enable networking

This series depends on:
- [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform [1]
from: Lokesh Vutla <lokeshvutla@xxxxxx>
- [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2]
from: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH] dmaengine: ti: k3-udma: Use soc_device_match() for SoC dependent parameters [3]
from: Peter Ujfalusi <peter.ujfalusi@xxxxxx>

[1] https://lore.kernel.org/linux-arm-kernel/20200827065144.17683-1-lokeshvutla@xxxxxx/T/#m141ae4d0dd818518c00c81806d689983d6e832e6
[2] https://lore.kernel.org/patchwork/patch/1283230/
[3] https://lore.kernel.org/lkml/20200904120009.30941-1-peter.ujfalusi@xxxxxx/

Changes in v2:
- fixed DT build warnings (Nishanth Menon)

v1: https://lore.kernel.org/patchwork/cover/1301067/

Grygorii Strashko (3):
arm64: dts: ti: k3-j7200-main: add main navss cpts node
arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux
and phy defs

Peter Ujfalusi (1):
arm64: dts: ti: k3-j7200: add DMA support

.../dts/ti/k3-j7200-common-proc-board.dts | 45 +++++++
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 73 +++++++++++
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 118 ++++++++++++++++++
3 files changed, 236 insertions(+)