Re: [PATCH v2 1/6] dt-bindings: mfd: Add Actions Semi ATC260x PMIC binding

[Rob Herring]

On Sat, Aug 22, 2020 at 01:19:47AM +0300, Cristian Ciocaltea wrote:
> Add devicetree binding for Actions Semi ATC260x PMICs.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
> ---
>  .../bindings/mfd/actions,atc260x.yaml         | 221 ++++++++++++++++++
>  1 file changed, 221 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
> new file mode 100644
> index 000000000000..4a55bbe1306e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
> @@ -0,0 +1,221 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Actions Semi ATC260x Power Management IC bindings
> +
> +maintainers:
> +  - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> +  - Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
> +
> +description: |
> +  ATC260x series PMICs integrates Audio Codec, Power Management, RTC, IR
> +  and GPIO controller blocks. Currently only the PM related functionalities
> +  (i.e. regulators and system power-off/reboot) for the ATC2603C and ATC2609A
> +  chip variants are supported.
> +  ATC2603C includes 3 programmable DC-DC converters and 9 LDO regulators.
> +  ATC2609A includes 5 programmable DC-DC converters and 10 LDO regulators.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - actions,atc2603c
> +      - actions,atc2609a
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  pwrc:
> +    type: object
> +    description: |
> +      The power controller integrated in ATC260x provides system power-off
> +      and reboot operations.

No need for this node as there are no properties, just instantiate 
what's needed in the MFD driver.

> +
> +    properties:
> +      compatible:
> +        enum:
> +          - actions,atc2603c-pwrc
> +          - actions,atc2609a-pwrc
> +
> +    required:
> +      - compatible
> +
> +    additionalProperties: false
> +
> +  onkey:
> +    type: object
> +    description: |
> +      Use the ONKEY built into ATC260x PMICs as an input device reporting
> +      power button status. ONKEY can be used to wakeup from low power
> +      modes and force a reset on long press.
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - actions,atc2603c-onkey
> +          - actions,atc2609a-onkey
> +
> +      actions,reset-time-sec:
> +        description: |
> +          Duration in seconds which the key should be kept pressed for device
> +          to reset automatically. The hardware default is 8. Use 0 to disable
> +          this functionality.
> +        enum: [0, 6, 8, 10, 12]

We already have 'power-off-time-sec' in input.yaml. How about adding 
'reset-time-sec' there.

This could really just be a property in the parent node.

> +
> +    required:
> +      - compatible
> +
> +    additionalProperties: false
> +
> +  regulators:
> +    type: object
> +    description: |
> +      List of child nodes specifying the regulators, depending on chip variant:
> +      * ATC2603C: dcdc[1-3], ldo[1-3,5-8,11], switchldo1
> +      * ATC2609A: dcdc[0-4], ldo[0-9]
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - actions,atc2603c-regulator
> +          - actions,atc2609a-regulator
> +
> +      switchldo1:
> +        type: object
> +        $ref: ../regulator/regulator.yaml
> +
> +        properties:
> +          regulator-name: true
> +          regulator-boot-on: true
> +          regulator-always-on: true
> +          regulator-min-microvolt: true
> +          regulator-max-microvolt: true
> +          regulator-allow-bypass: true
> +          regulator-active-discharge: true
> +
> +        additionalProperties: false
> +
> +    patternProperties:
> +      "^(dcdc[0-4]|ldo[0-9]|ldo11|switchldo1)-supply$":
> +        description: ATC260x voltage regulators supplies
> +
> +      "^(dcdc[0-4]|ldo[0-9]|ldo11)$":
> +        type: object
> +        $ref: ../regulator/regulator.yaml
> +
> +        properties:
> +          regulator-name: true
> +          regulator-boot-on: true
> +          regulator-always-on: true
> +          regulator-min-microvolt: true
> +          regulator-max-microvolt: true
> +          regulator-allow-bypass: true
> +
> +        additionalProperties: false
> +
> +    allOf:
> +      - if:
> +          properties:
> +            compatible:
> +              contains:
> +                const: actions,atc2603c-regulator
> +        then:
> +          patternProperties:
> +            "^(dcdc[0,4]|ldo[0,4,9])(-supply)?$": false
> +
> +            "^(ldo|dcdc)":
> +              properties:
> +                regulator-allow-bypass: false
> +      - if:
> +          properties:
> +            compatible:
> +              contains:
> +                const: actions,atc2609a-regulator
> +        then:
> +          patternProperties:
> +            "^(ldo11|switchldo1)(-supply)?$": false
> +
> +            "^(dcdc|ldo[3-9])":
> +              properties:
> +                regulator-allow-bypass: false
> +
> +    required:
> +      - compatible
> +
> +    additionalProperties: false
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    i2c0 {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      pmic@65 {
> +        compatible = "actions,atc2603c";
> +        reg = <0x65>;
> +        interrupt-parent = <&sirq>;
> +        interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> +
> +        pwrc {
> +          compatible = "actions,atc2603c-pwrc";
> +        };
> +
> +        onkey {
> +          compatible = "actions,atc2603c-onkey";
> +          actions,reset-time-sec = <6>;
> +        };
> +
> +        regulators {
> +          compatible = "actions,atc2603c-regulator";
> +
> +          dcdc1-supply = <&reg_5v0>;
> +          dcdc3-supply = <&reg_5v0>;
> +          ldo5-supply = <&reg_5v0>;
> +          switchldo1-supply = <&vcc>;
> +
> +          vdd_cpu: dcdc1 {
> +            regulator-name = "VDD_CPU";
> +            regulator-min-microvolt = <700000>;
> +            regulator-max-microvolt = <1400000>;
> +            regulator-always-on;
> +          };
> +
> +          vcc: dcdc3 {
> +            regulator-name = "VCC";
> +            regulator-min-microvolt = <2600000>;
> +            regulator-max-microvolt = <3300000>;
> +            regulator-always-on;
> +          };
> +
> +          vcc_3v1: ldo5 {
> +            regulator-name = "VCC_3V1";
> +            regulator-min-microvolt = <2600000>;
> +            regulator-max-microvolt = <3300000>;
> +          };
> +
> +          sd_vcc: switchldo1 {
> +            regulator-name = "SD_VCC";
> +            regulator-min-microvolt = <3000000>;
> +            regulator-max-microvolt = <3300000>;
> +            regulator-always-on;
> +            regulator-boot-on;
> +          };
> +        };
> +      };
> +    };
> +
> +...
> -- 
> 2.28.0
>