Re: [PATCH v2 2/2] venus: firmware: Set virtual address ranges

[Stanimir Varbanov]

On 9/8/20 5:39 PM, Bjorn Andersson wrote:
> On Mon 17 Aug 03:27 CDT 2020, Stanimir Varbanov wrote:
> 
>> In order to boot some of the new Venus firmware versions TZ call to set
>> virtual address ranges is needed. Add virtual address ranges for CP and
>> CP_NONPIX in resource structure and use them when loading and booting
>> the firmware on remote processor.
>>
>> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
>> ---
>>  drivers/media/platform/qcom/venus/core.c     |  4 ++++
>>  drivers/media/platform/qcom/venus/core.h     |  4 ++++
>>  drivers/media/platform/qcom/venus/firmware.c | 18 +++++++++++++++++-
>>  3 files changed, 25 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
>> index 203c6538044f..5f8f7b72731c 100644
>> --- a/drivers/media/platform/qcom/venus/core.c
>> +++ b/drivers/media/platform/qcom/venus/core.c
>> @@ -527,6 +527,10 @@ static const struct venus_resources sdm845_res_v2 = {
>>  	.vmem_size = 0,
>>  	.vmem_addr = 0,
>>  	.dma_mask = 0xe0000000 - 1,
>> +	.cp_start = 0,
>> +	.cp_size = 0x70800000,
>> +	.cp_nonpixel_start = 0x1000000,
>> +	.cp_nonpixel_size = 0x24800000,
>>  	.fwname = "qcom/venus-5.2/venus.mdt",
>>  };
>>  
>> diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
>> index 7118612673c9..8c88516e4694 100644
>> --- a/drivers/media/platform/qcom/venus/core.h
>> +++ b/drivers/media/platform/qcom/venus/core.h
>> @@ -68,6 +68,10 @@ struct venus_resources {
>>  	unsigned int vmem_id;
>>  	u32 vmem_size;
>>  	u32 vmem_addr;
>> +	u32 cp_start;
>> +	u32 cp_size;
>> +	u32 cp_nonpixel_start;
>> +	u32 cp_nonpixel_size;
>>  	const char *fwname;
>>  };
>>  
>> diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
>> index 8801a6a7543d..ac906ffc608f 100644
>> --- a/drivers/media/platform/qcom/venus/firmware.c
>> +++ b/drivers/media/platform/qcom/venus/firmware.c
>> @@ -181,6 +181,7 @@ static int venus_shutdown_no_tz(struct venus_core *core)
>>  int venus_boot(struct venus_core *core)
>>  {
>>  	struct device *dev = core->dev;
>> +	const struct venus_resources *res = core->res;
>>  	phys_addr_t mem_phys;
>>  	size_t mem_size;
>>  	int ret;
>> @@ -200,7 +201,22 @@ int venus_boot(struct venus_core *core)
>>  	else
>>  		ret = venus_boot_no_tz(core, mem_phys, mem_size);
>>  
>> -	return ret;
>> +	if (ret)
>> +		return ret;
>> +
>> +	if (core->use_tz && res->cp_size) {
>> +		ret = qcom_scm_mem_protect_video_var(res->cp_start,
>> +						     res->cp_size,
>> +						     res->cp_nonpixel_start,
>> +						     res->cp_nonpixel_size);
>> +		if (ret) {
>> +			dev_err(dev, "set virtual address ranges fail (%d)\n",
>> +				ret);
>> +			return ret;
> 
> Afaict venus_probe() will tear down clocks and power of the now running
> Venus core when you return an error here. Isn't it necessary to stop the
> core here as well?

I guess by "stop the core" you mean a call to qcom_scm_pas_shutdown() ?
If so, I think it makes sense.

-- 
regards,
Stan