[PATCH net-next + mvebu v2 7/7] arm64: dts: armada-3720-turris-mox: add nodes for ethernet PHY LEDs

[Marek Behún]

Add nodes for the green and yellow LEDs that are connected to the
ethernet PHY chip on Turris MOX A.

Signed-off-by: Marek Behún <marek.behun@xxxxxx>
---
 .../dts/marvell/armada-3720-turris-mox.dts    | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index f3a678e0fd99b..6da03b6c69c0a 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/bus/moxtet.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "armada-372x.dtsi"
 
 / {
@@ -273,6 +274,28 @@ &mdio {
 
 	phy1: ethernet-phy@1 {
 		reg = <1>;
+
+		leds {
+			compatible = "linux,hw-controlled-leds";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_STATUS;
+				linux,default-trigger = "dev-hw-mode";
+				linux,default-hw-mode = "1Gbps/100Mbps/10Mbps";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_ACTIVITY;
+				linux,default-trigger = "dev-hw-mode";
+				linux,default-hw-mode = "blink-act";
+			};
+		};
 	};
 
 	/* switch nodes are enabled by U-Boot if modules are present */
-- 
2.26.2