[PATCH net-next + leds v2 1/7] dt-bindings: leds: document binding for HW controlled LEDs

[Marek Behún]

Document binding for LEDs connected to and controlled by various chips
(such as ethernet PHY chips).

Signed-off-by: Marek Behún <marek.behun@xxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
 .../leds/linux,hw-controlled-leds.yaml        | 99 +++++++++++++++++++
 1 file changed, 99 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/linux,hw-controlled-leds.yaml

diff --git a/Documentation/devicetree/bindings/leds/linux,hw-controlled-leds.yaml b/Documentation/devicetree/bindings/leds/linux,hw-controlled-leds.yaml
new file mode 100644
index 0000000000000..eaf6e5d80c5f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/linux,hw-controlled-leds.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/linux,hw-controlled-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs that can be controlled by hardware (eg. by an ethernet PHY chip)
+
+maintainers:
+  - Marek Behún <marek.behun@xxxxxx>
+
+description:
+  Many an ethernet PHY (and other chips) supports various HW control modes
+  for LEDs connected directly to them. With this binding such LEDs can be
+  described.
+
+properties:
+  compatible:
+    const: linux,hw-controlled-leds
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-9a-f]+$":
+    type: object
+    allOf:
+      - $ref: common.yaml#
+    description:
+      This node represents a LED device connected to a chip that can control
+      the LED in various HW controlled modes.
+
+    properties:
+      reg:
+        maxItems: 1
+        description:
+          This property identifies the LED to the chip the LED is connected to
+          (eg. an ethernet PHY chip can have multiple LEDs connected to it).
+
+      enable-active-high:
+        description:
+          Polarity of LED is active high. If missing, assumed default is active
+          low.
+        type: boolean
+
+      led-tristate:
+        description:
+          LED pin is tristate type. If missing, assumed false.
+        type: boolean
+
+      linux,default-hw-mode:
+        description:
+          This parameter, if present, specifies the default HW triggering mode
+          of the LED when LED trigger is set to `dev-hw-mode`.
+          Available values are specific per device the LED is connected to and
+          per LED itself.
+        $ref: /schemas/types.yaml#definitions/string
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/leds/common.h>
+
+    ethernet-phy@0 {
+        compatible = "ethernet-phy-ieee802.3-c45";
+        reg = <0>;
+
+        leds {
+            compatible = "linux,hw-controlled-leds";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0>;
+                color = <LED_COLOR_ID_GREEN>;
+                function = <LED_FUNCTION_STATUS>;
+                linux,default-trigger = "dev-hw-mode";
+                linux,default-hw-mode = "1Gbps";
+            };
+
+            led@1 {
+                reg = <1>;
+                color = <LED_COLOR_ID_YELLOW>;
+                function = <LED_FUNCTION_ACTIVITY>;
+                linux,default-trigger = "dev-hw-mode";
+                linux,default-hw-mode = "activity";
+            };
+        };
+    };
+
+...
-- 
2.26.2