Re: [PATCH] usb: phy: tegra: Use IS_ERR() to check and simplify code

From: Sergei Shtylyov
Date: Fri Sep 11 2020 - 04:30:24 EST


Hello!

On 10.09.2020 14:56, Tang Bin wrote:

Use IS_ERR() and PTR_ERR() instead of PTR_ERR_OR_ZERO() to
simplify code, avoid redundant judgements.

Signed-off-by: Zhang Shengju <zhangshengju@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
---
drivers/usb/phy/phy-tegra-usb.c | 25 ++++++++++---------------
1 file changed, 10 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 6153cc35a..3b901429d 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -1121,10 +1121,9 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
return PTR_ERR(tegra_phy->vbus);
tegra_phy->pll_u = devm_clk_get(&pdev->dev, "pll_u");
- err = PTR_ERR_OR_ZERO(tegra_phy->pll_u);
- if (err) {
+ if (IS_ERR(tegra_phy->pll_u)) {
dev_err(&pdev->dev, "Failed to get pll_u clock: %d\n", err);

'err' should be changed here too...

- return err;
+ return PTR_ERR(tegra_phy->pll_u);
}
phy_type = of_usb_get_phy_mode(np);
@@ -1135,20 +1134,18 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
return err;
tegra_phy->pad_clk = devm_clk_get(&pdev->dev, "utmi-pads");
- err = PTR_ERR_OR_ZERO(tegra_phy->pad_clk);
- if (err) {
+ if (IS_ERR(tegra_phy->pad_clk)) {
dev_err(&pdev->dev,
"Failed to get UTMIP pad clock: %d\n", err);

Same here.

- return err;
+ return PTR_ERR(tegra_phy->pad_clk);
}
reset = devm_reset_control_get_optional_shared(&pdev->dev,
"utmi-pads");
- err = PTR_ERR_OR_ZERO(reset);
- if (err) {
+ if (IS_ERR(reset)) {
dev_err(&pdev->dev,
"Failed to get UTMI-pads reset: %d\n", err);

And here.

- return err;
+ return PTR_ERR(reset);
}
tegra_phy->pad_rst = reset;
break;
@@ -1157,22 +1154,20 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
tegra_phy->is_ulpi_phy = true;
tegra_phy->clk = devm_clk_get(&pdev->dev, "ulpi-link");
- err = PTR_ERR_OR_ZERO(tegra_phy->clk);
- if (err) {
+ if (IS_ERR(tegra_phy->clk)) {
dev_err(&pdev->dev,
"Failed to get ULPI clock: %d\n", err);

And here.

- return err;
+ return PTR_ERR(tegra_phy->clk);
}
gpiod = devm_gpiod_get_from_of_node(&pdev->dev, np,
"nvidia,phy-reset-gpio",
0, GPIOD_OUT_HIGH,
"ulpi_phy_reset_b");
- err = PTR_ERR_OR_ZERO(gpiod);
- if (err) {
+ if (IS_ERR(gpiod)) {
dev_err(&pdev->dev,
"Request failed for reset GPIO: %d\n", err);

And here.

- return err;
+ return PTR_ERR(gpiod);
}
tegra_phy->reset_gpio = gpiod;

Overall, this patch is broken and not even worth redoing -- the current code seems good...

MBR, Sergei