[PATCH v3 1/7] dt-bindings: clock: sdm845-dispcc: same name for dp_phy clocks as sc7180

[Jonathan Marek]

This makes it easier to combine dt bindings for sdm845/sc7180 dispcc.

Note: nothing upstream provides these clocks and the sdm845 dispcc driver
hasn't switched to using .fw_name for these clocks (these properties are
ignored), so changing this shouldn't be a problem.

Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
---
 .../devicetree/bindings/clock/qcom,sdm845-dispcc.yaml     | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
index 4a3be733d042..ead44705333b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
@@ -43,8 +43,8 @@ properties:
       - const: dsi0_phy_pll_out_dsiclk
       - const: dsi1_phy_pll_out_byteclk
       - const: dsi1_phy_pll_out_dsiclk
-      - const: dp_link_clk_divsel_ten
-      - const: dp_vco_divided_clk_src_mux
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
 
   '#clock-cells':
     const: 1
@@ -92,8 +92,8 @@ examples:
                     "dsi0_phy_pll_out_dsiclk",
                     "dsi1_phy_pll_out_byteclk",
                     "dsi1_phy_pll_out_dsiclk",
-                    "dp_link_clk_divsel_ten",
-                    "dp_vco_divided_clk_src_mux";
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-- 
2.26.1