RE: [PATCH 7/7] PCI: layerscape: Add power management support

From: Z.q. Hou
Date: Tue Sep 15 2020 - 02:44:44 EST


Hi Rob,

Thanks a lot for your comments!

> -----Original Message-----
> From: Rob Herring <robh@xxxxxxxxxx>
> Sent: 2020年9月15日 9:30
> To: Z.q. Hou <zhiqiang.hou@xxxxxxx>
> Cc: linux-pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; bhelgaas@xxxxxxxxxx;
> shawnguo@xxxxxxxxxx; Leo Li <leoyang.li@xxxxxxx>;
> lorenzo.pieralisi@xxxxxxx; gustavo.pimentel@xxxxxxxxxxxx; M.h. Lian
> <minghuan.lian@xxxxxxx>; Mingkai Hu <mingkai.hu@xxxxxxx>; Roy Zang
> <roy.zang@xxxxxxx>
> Subject: Re: [PATCH 7/7] PCI: layerscape: Add power management support
>
> On Mon, Sep 07, 2020 at 01:38:01PM +0800, Zhiqiang Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> >
> > Add PME_Turn_Off/PME_TO_Ack handshake sequence, and finally put the
> > PCIe controller into D3 state after the L2/L3 ready state transition
> > process completion.
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> > ---
> > drivers/pci/controller/dwc/pci-layerscape.c | 384
> ++++++++++++++++++-
> > drivers/pci/controller/dwc/pcie-designware.h | 1 +
> > 2 files changed, 383 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c
> > b/drivers/pci/controller/dwc/pci-layerscape.c
> > index be404c16bcbe..ca9ea07f77c1 100644
> > --- a/drivers/pci/controller/dwc/pci-layerscape.c
> > +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> > @@ -3,13 +3,16 @@
> > * PCIe host controller driver for Freescale Layerscape SoCs
> > *
> > * Copyright (C) 2014 Freescale Semiconductor.
> > + * Copyright 2020 NXP
> > *
> > * Author: Minghuan Lian <Minghuan.Lian@xxxxxxxxxxxxx>
> > */
> >
> > +#include <linux/delay.h>
> > #include <linux/kernel.h>
> > #include <linux/interrupt.h>
> > #include <linux/init.h>
> > +#include <linux/iopoll.h>
> > #include <linux/of_pci.h>
> > #include <linux/of_platform.h>
> > #include <linux/of_irq.h>
> > @@ -27,17 +30,66 @@
> > #define PCIE_ABSERR 0x8d0 /* Bridge Slave Error Response
> Register */
> > #define PCIE_ABSERR_SETTING 0x9401 /* Forward error of
> non-posted request */
> >
> > +#define PCIE_PM_SCR 0x44
> > +#define PCIE_PM_SCR_PMEPS_D0 0x0
> > +#define PCIE_PM_SCR_PMEPS_D3 0x3
> > +
> > +#define PCIE_LNKCTL 0x80 /* PCIe link ctrl Register */
>
> Use the common defines.
>

OK, will change in next version.

>
> > +
> > +/* PF Message Command Register */
> > +#define LS_PCIE_PF_MCR 0x2c
> > +#define PF_MCR_PTOMR BIT(0)
> > +#define PF_MCR_EXL2S BIT(1)
> > +
> > +/* LS1021A PEXn PM Write Control Register */
> > +#define SCFG_PEXPMWRCR(idx) (0x5c + (idx) * 0x64)
> > +#define PMXMTTURNOFF BIT(31)
> > +#define SCFG_PEXSFTRSTCR 0x190
> > +#define PEXSR(idx) BIT(idx)
> > +
> > +/* LS1043A PEX PME control register */
> > +#define SCFG_PEXPMECR 0x144
> > +#define PEXPME(idx) BIT(31 - (idx) * 4)
> > +
> > +/* LS1043A PEX LUT debug register */
> > +#define LS_PCIE_LDBG 0x7fc
> > +#define LDBG_SR BIT(30)
> > +#define LDBG_WE BIT(31)
> > +
> > #define PCIE_IATU_NUM 6
> >
> > +#define LS_PCIE_IS_L2(v) \
> > + (((v) & PORT_LOGIC_LTSSM_STATE_MASK) ==
> PORT_LOGIC_LTSSM_STATE_L2)
> > +
> > +struct ls_pcie;
> > +
> > +struct ls_pcie_host_pm_ops {
> > + int (*pm_init)(struct ls_pcie *pcie);
> > + void (*send_turn_off_message)(struct ls_pcie *pcie);
> > + void (*exit_from_l2)(struct ls_pcie *pcie); };
> > +
> > struct ls_pcie_drvdata {
> > + const u32 pf_off;
> > + const u32 lut_off;
> > const struct dw_pcie_host_ops *ops;
> > + const struct ls_pcie_host_pm_ops *pm_ops;
> > };
> >
> > struct ls_pcie {
> > struct dw_pcie *pci;
> > const struct ls_pcie_drvdata *drvdata;
> > + void __iomem *pf_base;
> > + void __iomem *lut_base;
> > + bool big_endian;
> > + bool ep_presence;
> > + bool pm_support;
> > + struct regmap *scfg;
> > + int index;
> > };
> >
> > +#define ls_pcie_lut_readl_addr(addr) ls_pcie_lut_readl(pcie, addr)
> > +#define ls_pcie_pf_readl_addr(addr) ls_pcie_pf_readl(pcie, addr)
> > #define to_ls_pcie(x) dev_get_drvdata((x)->dev)
> >
> > static bool ls_pcie_is_bridge(struct ls_pcie *pcie) @@ -86,6 +138,208
> > @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
> > iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR); }
> >
> > +static u32 ls_pcie_lut_readl(struct ls_pcie *pcie, u32 off) {
> > + if (pcie->big_endian)
> > + return ioread32be(pcie->lut_base + off);
> > +
> > + return ioread32(pcie->lut_base + off); }
> > +
> > +static void ls_pcie_lut_writel(struct ls_pcie *pcie, u32 off, u32
> > +val) {
> > + if (pcie->big_endian)
> > + return iowrite32be(val, pcie->lut_base + off);
> > +
> > + return iowrite32(val, pcie->lut_base + off);
> > +
> > +}
> > +
> > +static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off) {
> > + if (pcie->big_endian)
> > + return ioread32be(pcie->pf_base + off);
> > +
> > + return ioread32(pcie->pf_base + off); }
> > +
> > +static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
> > +{
> > + if (pcie->big_endian)
> > + return iowrite32be(val, pcie->pf_base + off);
> > +
> > + return iowrite32(val, pcie->pf_base + off);
> > +
> > +}
> > +
> > +static void ls_pcie_send_turnoff_msg(struct ls_pcie *pcie) {
> > + u32 val;
> > + int ret;
> > +
> > + val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> > + val |= PF_MCR_PTOMR;
> > + ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> > +
> > + ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> > + val, !(val & PF_MCR_PTOMR), 100, 10000);
> > + if (ret)
> > + dev_info(pcie->pci->dev, "poll turn off message timeout\n"); }
> > +
> > +static void ls1021a_pcie_send_turnoff_msg(struct ls_pcie *pcie) {
> > + u32 val;
> > +
> > + if (!pcie->scfg) {
> > + dev_dbg(pcie->pci->dev, "SYSCFG is NULL\n");
> > + return;
> > + }
> > +
> > + /* Send Turn_off message */
> > + regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> > + val |= PMXMTTURNOFF;
> > + regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> > +
> > + mdelay(10);
> > +
> > + /* Clear Turn_off message */
> > + regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> > + val &= ~PMXMTTURNOFF;
> > + regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val); }
> > +
> > +static void ls1043a_pcie_send_turnoff_msg(struct ls_pcie *pcie) {
> > + u32 val;
> > +
> > + if (!pcie->scfg) {
> > + dev_dbg(pcie->pci->dev, "SYSCFG is NULL\n");
> > + return;
> > + }
> > +
> > + /* Send Turn_off message */
> > + regmap_read(pcie->scfg, SCFG_PEXPMECR, &val);
> > + val |= PEXPME(pcie->index);
> > + regmap_write(pcie->scfg, SCFG_PEXPMECR, val);
> > +
> > + mdelay(10);
> > +
> > + /* Clear Turn_off message */
> > + regmap_read(pcie->scfg, SCFG_PEXPMECR, &val);
> > + val &= ~PEXPME(pcie->index);
> > + regmap_write(pcie->scfg, SCFG_PEXPMECR, val); }
> > +
> > +static void ls_pcie_exit_from_l2(struct ls_pcie *pcie) {
> > + u32 val;
> > + int ret;
> > +
> > + val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> > + val |= PF_MCR_EXL2S;
> > + ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> > +
> > + ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> > + val, !(val & PF_MCR_EXL2S), 100, 10000);
> > + if (ret)
> > + dev_info(pcie->pci->dev, "poll exit L2 state timeout\n"); }
> > +
> > +static void ls_pcie_retrain_link(struct ls_pcie *pcie) {
> > + struct dw_pcie *pci = pcie->pci;
> > + u32 val;
> > +
> > + val = dw_pcie_readw_dbi(pci, PCIE_LNKCTL);
> > + val |= PCI_EXP_LNKCTL_RL;
> > + dw_pcie_writew_dbi(pci, PCIE_LNKCTL, val); }
> > +
> > +static void ls1021a_pcie_exit_from_l2(struct ls_pcie *pcie) {
> > + u32 val;
> > +
> > + regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> > + val |= PEXSR(pcie->index);
> > + regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> > +
> > + regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> > + val &= ~PEXSR(pcie->index);
> > + regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> > +
> > + mdelay(1);
> > +
> > + ls_pcie_retrain_link(pcie);
> > +}
> > +static void ls1043a_pcie_exit_from_l2(struct ls_pcie *pcie) {
> > + u32 val;
> > +
> > + val = ls_pcie_lut_readl(pcie, LS_PCIE_LDBG);
> > + val |= LDBG_WE;
> > + ls_pcie_lut_writel(pcie, LS_PCIE_LDBG, val);
> > +
> > + val = ls_pcie_lut_readl(pcie, LS_PCIE_LDBG);
> > + val |= LDBG_SR;
> > + ls_pcie_lut_writel(pcie, LS_PCIE_LDBG, val);
> > +
> > + val = ls_pcie_lut_readl(pcie, LS_PCIE_LDBG);
> > + val &= ~LDBG_SR;
> > + ls_pcie_lut_writel(pcie, LS_PCIE_LDBG, val);
> > +
> > + val = ls_pcie_lut_readl(pcie, LS_PCIE_LDBG);
> > + val &= ~LDBG_WE;
> > + ls_pcie_lut_writel(pcie, LS_PCIE_LDBG, val);
> > +
> > + mdelay(1);
> > +
> > + ls_pcie_retrain_link(pcie);
> > +}
> > +
> > +static int ls1021a_pcie_pm_init(struct ls_pcie *pcie) {
> > + struct device *dev = pcie->pci->dev;
> > + u32 index[2];
> > + int ret;
> > +
> > + pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node,
> > + "fsl,pcie-scfg");
> > + if (IS_ERR(pcie->scfg)) {
> > + ret = PTR_ERR(pcie->scfg);
> > + dev_err(dev, "No syscfg phandle specified\n");
> > + pcie->scfg = NULL;
> > + return ret;
> > + }
> > +
> > + ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg",
> > + index, 2);
> > + if (ret) {
> > + pcie->scfg = NULL;
> > + return ret;
> > + }
> > +
> > + pcie->index = index[1];
> > +
> > + return 0;
> > +}
> > +
> > +static int ls_pcie_pm_init(struct ls_pcie *pcie) {
> > + return 0;
> > +}
> > +
> > +static void ls_pcie_set_dstate(struct ls_pcie *pcie, u32 dstate) {
> > + struct dw_pcie *pci = pcie->pci;
> > + u32 val;
> > +
> > + val = dw_pcie_readw_dbi(pci, PCIE_PM_SCR);
> > + val &= ~PCI_PM_CTRL_STATE_MASK;
> > + val |= dstate;
> > + dw_pcie_writew_dbi(pci, PCIE_PM_SCR, val); }
> > +
> > static int ls_pcie_host_init(struct pcie_port *pp) {
> > struct dw_pcie *pci = to_dw_pcie_from_pp(pp); @@ -133,20 +387,52
> @@
> > static int ls_pcie_msi_host_init(struct pcie_port *pp)
> > return 0;
> > }
> >
> > +static struct ls_pcie_host_pm_ops ls1021a_pcie_host_pm_ops = {
> > + .pm_init = &ls1021a_pcie_pm_init,
> > + .send_turn_off_message = &ls1021a_pcie_send_turnoff_msg,
> > + .exit_from_l2 = &ls1021a_pcie_exit_from_l2, };
> > +
> > +static struct ls_pcie_host_pm_ops ls1043a_pcie_host_pm_ops = {
> > + .pm_init = &ls1021a_pcie_pm_init,
> > + .send_turn_off_message = &ls1043a_pcie_send_turnoff_msg,
> > + .exit_from_l2 = &ls1043a_pcie_exit_from_l2, };
> > +
> > +static struct ls_pcie_host_pm_ops ls_pcie_host_pm_ops = {
> > + .pm_init = &ls_pcie_pm_init,
> > + .send_turn_off_message = &ls_pcie_send_turnoff_msg,
> > + .exit_from_l2 = &ls_pcie_exit_from_l2, };
> > +
> > static const struct dw_pcie_host_ops ls_pcie_host_ops = {
> > .host_init = ls_pcie_host_init,
> > .msi_host_init = ls_pcie_msi_host_init, };
> >
> > +static const struct ls_pcie_drvdata ls1021a_drvdata = {
> > + .ops = &ls_pcie_host_ops,
> > + .pm_ops = &ls1021a_pcie_host_pm_ops, };
> > +
> > +static const struct ls_pcie_drvdata ls1043a_drvdata = {
> > + .ops = &ls_pcie_host_ops,
> > + .lut_off = 0x10000,
> > + .pm_ops = &ls1043a_pcie_host_pm_ops, };
> > +
> > static const struct ls_pcie_drvdata layerscape_drvdata = {
> > .ops = &ls_pcie_host_ops,
> > + .lut_off = 0x80000,
> > + .pf_off = 0xc0000,
> > + .pm_ops = &ls_pcie_host_pm_ops,
> > };
> >
> > static const struct of_device_id ls_pcie_of_match[] = {
> > { .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
> > - { .compatible = "fsl,ls1021a-pcie", .data = &layerscape_drvdata },
> > + { .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
> > { .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
> > - { .compatible = "fsl,ls1043a-pcie", .data = &layerscape_drvdata },
> > + { .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
> > { .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
> > { .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
> > { .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
> > @@ -170,6 +456,15 @@ static int __init ls_add_pcie_port(struct ls_pcie
> *pcie)
> > return ret;
> > }
> >
> > + if (dw_pcie_link_up(pci)) {
> > + dev_dbg(pci->dev, "Endpoint is present\n");
> > + pcie->ep_presence = true;
> > + }
> > +
> > + if (pcie->drvdata->pm_ops && pcie->drvdata->pm_ops->pm_init &&
> > + !pcie->drvdata->pm_ops->pm_init(pcie))
> > + pcie->pm_support = true;
> > +
> > return 0;
> > }
> >
> > @@ -200,6 +495,14 @@ static int __init ls_pcie_probe(struct
> platform_device *pdev)
> > if (IS_ERR(pci->dbi_base))
> > return PTR_ERR(pci->dbi_base);
> >
> > + pcie->big_endian = of_property_read_bool(dev->of_node,
> > +"big-endian");
> > +
> > + if (pcie->drvdata->lut_off)
> > + pcie->lut_base = pci->dbi_base + pcie->drvdata->lut_off;
> > +
> > + if (pcie->drvdata->pf_off)
> > + pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
> > +
> > if (!ls_pcie_is_bridge(pcie))
> > return -ENODEV;
> >
> > @@ -212,11 +515,88 @@ static int __init ls_pcie_probe(struct
> platform_device *pdev)
> > return 0;
> > }
> >
> > +static bool ls_pcie_pm_check(struct ls_pcie *pcie) {
> > + if (!pcie->ep_presence) {
> > + dev_dbg(pcie->pci->dev, "Endpoint isn't present\n");
> > + return false;
> > + }
> > +
> > + if (!pcie->pm_support)
> > + return false;
> > +
> > + return true;
> > +}
> > +
> > +#ifdef CONFIG_PM_SLEEP
> > +static int ls_pcie_suspend_noirq(struct device *dev)
>
> Why is noirq variant needed? Most drivers don't need this.

Actually all PCIe RC drivers use the noirq variant, the reason
is the pci_pm_suspend_noirq() will call the pci_save_state().

Regards,
Zhiqiang

>
> > +{
> > + struct ls_pcie *pcie = dev_get_drvdata(dev);
> > + struct dw_pcie *pci = pcie->pci;
> > + u32 val;
> > + int ret;
> > +
> > + if (!ls_pcie_pm_check(pcie))
> > + return 0;
> > +
> > + pcie->drvdata->pm_ops->send_turn_off_message(pcie);
> > +
> > + /* 10ms timeout to check L2 ready */
> > + ret = readl_poll_timeout(pci->dbi_base + PCIE_PORT_DEBUG0,
> > + val, LS_PCIE_IS_L2(val), 100, 10000);
> > + if (ret) {
> > + dev_err(dev, "PCIe link enter L2 timeout! ltssm = 0x%x\n", val);
> > + return ret;
> > + }
> > +
> > + ls_pcie_set_dstate(pcie, PCIE_PM_SCR_PMEPS_D3);
> > +
> > + return 0;
> > +}
> > +
> > +static int ls_pcie_resume_noirq(struct device *dev) {
> > + struct ls_pcie *pcie = dev_get_drvdata(dev);
> > + struct dw_pcie *pci = pcie->pci;
> > + int ret;
> > +
> > + if (!ls_pcie_pm_check(pcie))
> > + return 0;
> > +
> > + ls_pcie_set_dstate(pcie, PCIE_PM_SCR_PMEPS_D0);
> > +
> > + pcie->drvdata->pm_ops->exit_from_l2(pcie);
> > +
> > + /* delay 10ms to access EP */
> > + mdelay(10);
> > +
> > + ret = ls_pcie_host_init(&pci->pp);
> > + if (ret) {
> > + dev_err(dev, "ls_pcie_host_init failed! ret = 0x%x\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = dw_pcie_wait_for_link(pci);
> > + if (ret) {
> > + dev_err(dev, "wait link up timeout! ret = 0x%x\n", ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +#endif /* CONFIG_PM_SLEEP */
> > +
> > +static const struct dev_pm_ops ls_pcie_pm_ops = {
> > + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(ls_pcie_suspend_noirq,
> > + ls_pcie_resume_noirq)
> > +};
> > +
> > static struct platform_driver ls_pcie_driver = {
> > .driver = {
> > .name = "layerscape-pcie",
> > .of_match_table = ls_pcie_of_match,
> > .suppress_bind_attrs = true,
> > + .pm = &ls_pcie_pm_ops,
> > },
> > };
> > builtin_platform_driver_probe(ls_pcie_driver, ls_pcie_probe); diff
> > --git a/drivers/pci/controller/dwc/pcie-designware.h
> > b/drivers/pci/controller/dwc/pcie-designware.h
> > index f911760dcc69..1f2fd03d1eba 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -46,6 +46,7 @@
> > #define PCIE_PORT_DEBUG0 0x728
> > #define PORT_LOGIC_LTSSM_STATE_MASK 0x1f
> > #define PORT_LOGIC_LTSSM_STATE_L0 0x11
> > +#define PORT_LOGIC_LTSSM_STATE_L2 0x15
> > #define PCIE_PORT_DEBUG1 0x72C
> > #define PCIE_PORT_DEBUG1_LINK_UP BIT(4)
> > #define PCIE_PORT_DEBUG1_LINK_IN_TRAINING BIT(29)
> > --
> > 2.17.1
> >