[PATCH 5.8 008/177] ARM: dts: omap5: Fix DSI base address and clocks

[Greg Kroah-Hartman]

From: David Shah <dave@xxxxxx>

[ Upstream commit 6542e2b613c2b1952e83973dc434831332ce8e27 ]

DSI was not probing due to base address off by 0x1000, and sys_clk
missing.

With this patch, the Pyra display works if HDMI is disabled in the
device tree.

Fixes: 5a507162f096 ("ARM: dts: Configure interconnect target module for omap5 dsi1")
Signed-off-by: David Shah <dave@xxxxxx>
Tested-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
[tony@xxxxxxxxxxx: standardized subject line, added fixes tag]
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm/boot/dts/omap5.dtsi | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index fb889c5b00c9d..de55ac5e60f39 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -463,11 +463,11 @@
 					};
 				};
 
-				target-module@5000 {
+				target-module@4000 {
 					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x5000 0x4>,
-					      <0x5010 0x4>,
-					      <0x5014 0x4>;
+					reg = <0x4000 0x4>,
+					      <0x4010 0x4>,
+					      <0x4014 0x4>;
 					reg-names = "rev", "sysc", "syss";
 					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 							<SYSC_IDLE_NO>,
@@ -479,7 +479,7 @@
 					ti,syss-mask = <1>;
 					#address-cells = <1>;
 					#size-cells = <1>;
-					ranges = <0 0x5000 0x1000>;
+					ranges = <0 0x4000 0x1000>;
 
 					dsi1: encoder@0 {
 						compatible = "ti,omap5-dsi";
@@ -489,8 +489,9 @@
 						reg-names = "proto", "phy", "pll";
 						interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 						status = "disabled";
-						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
-						clock-names = "fck";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
 					};
 				};
 
@@ -520,8 +521,9 @@
 						reg-names = "proto", "phy", "pll";
 						interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 						status = "disabled";
-						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
-						clock-names = "fck";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
 					};
 				};
 
-- 
2.25.1