[PATCH V2 0/5] Add support for custom names for AT24 EEPROMs

[Jon Hunter]

For platforms that have multiple boards and hence have multiple EEPROMs
for identifying the different boards, it is useful to label the EEPROMs
in device-tree so that they can be easily identified. For example, MAC
address information is stored in the EEPROM on the processor module for
some Jetson platforms which is not only required by the kernel but the
bootloader as well. So having a simple way to identify the EEPROM is
needed.

Changes since V1:
- By default initialise the nvmem_config.id as NVMEM_DEVID_AUTO and not
  NVMEM_DEVID_NONE
- Dropped the 'maxItems' from the dt-binding doc.

Jon Hunter (5):
  misc: eeprom: at24: Initialise AT24 NVMEM ID field
  dt-bindings: eeprom: at24: Add label property for AT24
  misc: eeprom: at24: Support custom device names for AT24 EEPROMs
  arm64: tegra: Add label properties for EEPROMs
  arm64: tegra: Populate EEPROMs for Jetson Xavier NX

 .../devicetree/bindings/eeprom/at24.yaml      |  3 +++
 .../boot/dts/nvidia/tegra186-p2771-0000.dts   |  1 +
 .../arm64/boot/dts/nvidia/tegra186-p3310.dtsi |  1 +
 .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi |  1 +
 .../boot/dts/nvidia/tegra194-p2972-0000.dts   |  1 +
 .../nvidia/tegra194-p3509-0000+p3668-0000.dts | 14 ++++++++++++
 .../boot/dts/nvidia/tegra194-p3668-0000.dtsi  | 16 ++++++++++++++
 .../arm64/boot/dts/nvidia/tegra210-p2180.dtsi |  1 +
 .../boot/dts/nvidia/tegra210-p2371-2180.dts   |  1 +
 .../boot/dts/nvidia/tegra210-p3450-0000.dts   |  2 ++
 drivers/misc/eeprom/at24.c                    | 22 ++++++++++++++++++-
 11 files changed, 62 insertions(+), 1 deletion(-)

-- 
2.25.1