Re: [PATCH v3 RESEND 2/8] phy: hisilicon: phy-hi3670-usb3: fix some issues at the init code

[Vinod Koul]

On 11-09-20, 14:16, Mauro Carvalho Chehab wrote:
> From: Yu Chen <chenyu56@xxxxxxxxxx>
> 
> There are some problems at the initialization part of this phy.
> Solve them.

Why not fold this into patch 1?

> 
> Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
> ---
>  drivers/phy/hisilicon/phy-hi3670-usb3.c | 70 +++++++++++--------------
>  1 file changed, 32 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/phy/hisilicon/phy-hi3670-usb3.c b/drivers/phy/hisilicon/phy-hi3670-usb3.c
> index 4e04ac97728d..1d4caf7a2aaf 100644
> --- a/drivers/phy/hisilicon/phy-hi3670-usb3.c
> +++ b/drivers/phy/hisilicon/phy-hi3670-usb3.c
> @@ -63,6 +63,7 @@
>  #define TCA_INTR_STS			(0x208)
>  #define TCA_GCFG			(0x210)
>  #define TCA_TCPC			(0x214)
> +#define TCA_SYSMODE_CFG			(0x218)
>  #define TCA_VBUS_CTRL			(0x240)
>  
>  #define CTRL0_USB3_VBUSVLD		BIT(7)
> @@ -109,12 +110,16 @@
>  #define CLK_RST_SUSPEND_CLK_EN		BIT(0)
>  
>  #define GCFG_ROLE_HSTDEV		BIT(4)
> +#define GCFG_OP_MODE			(3 << 0)
> +#define GCFG_OP_MODE_CTRL_SYNC_MODE	BIT(0)
>  
>  #define TCPC_VALID			BIT(4)
>  #define TCPC_LOW_POWER_EN		BIT(3)
>  #define TCPC_MUX_CONTROL_MASK		(3 << 0)
>  #define TCPC_MUX_CONTROL_USB31		(1 << 0)
>  
> +#define SYSMODE_CFG_TYPEC_DISABLE	BIT(3)
> +
>  #define VBUS_CTRL_POWERPRESENT_OVERRD	(3 << 2)
>  #define VBUS_CTRL_VBUSVALID_OVERRD	(3 << 0)
>  
> @@ -363,6 +368,11 @@ static int kirin970_config_phy_clock(struct kirin970_priv *priv)
>  		if (ret)
>  			goto out;
>  
> +		/* enable usb_tcxo_en */
> +		ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
> +				USB_TCXO_EN |
> +				(USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START));
> +
>  		/* select usbphy clk from abb */
>  		mask = SC_CLK_USB3PHY_3MUX1_SEL;
>  		ret = regmap_update_bits(priv->pctrl,
> @@ -437,7 +447,13 @@ static int kirin970_config_tca(struct kirin970_priv *priv)
>  		goto out;
>  
>  	ret = regmap_update_bits(priv->usb31misc, TCA_GCFG,
> -			GCFG_ROLE_HSTDEV, GCFG_ROLE_HSTDEV);
> +			GCFG_ROLE_HSTDEV | GCFG_OP_MODE,
> +			GCFG_ROLE_HSTDEV | GCFG_OP_MODE_CTRL_SYNC_MODE);
> +	if (ret)
> +		goto out;
> +
> +	ret = regmap_update_bits(priv->usb31misc, TCA_SYSMODE_CFG,
> +			SYSMODE_CFG_TYPEC_DISABLE, 0);
>  	if (ret)
>  		goto out;
>  
> @@ -461,18 +477,15 @@ static int kirin970_config_tca(struct kirin970_priv *priv)
>  	return ret;
>  }
>  
> -static int kirin970_phy_exit(struct phy *phy);
> -
>  static int kirin970_phy_init(struct phy *phy)
>  {
>  	struct kirin970_priv *priv = phy_get_drvdata(phy);
>  	u32 val;
>  	int ret;
>  
> -	kirin970_phy_exit(phy);
> -	dev_info(priv->dev, "%s in\n", __func__);
>  	/* assert controller */
> -	val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET;
> +	val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET |
> +		CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
>  	ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, 0);
>  	if (ret)
>  		goto out;
> @@ -493,6 +506,14 @@ static int kirin970_phy_init(struct phy *phy)
>  	if (ret)
>  		goto out;
>  
> +	/* Deassert phy */
> +	val = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
> +	ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
> +	if (ret)
> +		goto out;
> +
> +	udelay(100);
> +
>  	/* Tell the PHY power is stable */
>  	val = CFG54_USB3_PHY0_ANA_PWR_EN | CFG54_PHY0_PCS_PWR_STABLE |
>  		CFG54_PHY0_PMA_PWR_STABLE;
> @@ -512,14 +533,6 @@ static int kirin970_phy_init(struct phy *phy)
>  	if (ret)
>  		goto out;
>  
> -	/* Deassert phy */
> -	val = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
> -	ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
> -	if (ret)
> -		goto out;
> -
> -	udelay(100);
> -
>  	/* Deassert controller */
>  	val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET;
>  	ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
> @@ -545,29 +558,6 @@ static int kirin970_phy_init(struct phy *phy)
>  	if (ret)
>  		goto out;
>  
> -	{
> -		ret = regmap_read(priv->peri_crg, 0x4c,
> -				&val);
> -		if (!ret)
> -			dev_info(priv->dev, "peri_crg 0x4c %x\n", val);
> -		ret = regmap_read(priv->peri_crg, 0x404,
> -				&val);
> -		if (!ret)
> -			dev_info(priv->dev, "peri_crg 0x404 %x\n", val);
> -		ret = regmap_read(priv->peri_crg, 0xc,
> -				&val);
> -		if (!ret)
> -			dev_info(priv->dev, "peri_crg 0xc %x\n", val);
> -		ret = regmap_read(priv->peri_crg, 0xac,
> -				&val);
> -		if (!ret)
> -			dev_info(priv->dev, "peri_crg 0xac %x\n", val);
> -		ret = regmap_read(priv->pctrl, 0x10,
> -				&val);
> -		if (!ret)
> -			dev_info(priv->dev, "pctrl 0x10 %x\n", val);
> -	}
> -
>  	return 0;
>  out:
>  	dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
> @@ -586,7 +576,11 @@ static int kirin970_phy_exit(struct phy *phy)
>  	if (ret)
>  		goto out;
>  
> -	if (!kirin970_is_abbclk_seleted(priv)) {
> +	if (kirin970_is_abbclk_seleted(priv)) {
> +		/* disable usb_tcxo_en */
> +		ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
> +				USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
> +	} else {
>  		ret = regmap_write(priv->peri_crg, PERI_CRG_PERDIS6,
>  				GT_CLK_USB2PHY_REF);
>  		if (ret)
> -- 
> 2.26.2

-- 
~Vinod