RE: [PATCH V2 3/4] ARM: imx: imx7ulp: support HSRUN mode

[Aisheng Dong]

> From: Peng Fan <peng.fan@xxxxxxx>
> Sent: Wednesday, September 16, 2020 10:49 AM
> 
> Configure PMPROT to let ARM core could run into HSRUN mode.
> In LDO-enabled mode, HSRUN mode is not allowed, so add a check before
> configure PMPROT.
> 
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---
>  arch/arm/mach-imx/pm-imx7ulp.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm/mach-imx/pm-imx7ulp.c
> b/arch/arm/mach-imx/pm-imx7ulp.c index 2e756d8191fa..393faf1e8382
> 100644
> --- a/arch/arm/mach-imx/pm-imx7ulp.c
> +++ b/arch/arm/mach-imx/pm-imx7ulp.c
> @@ -11,6 +11,10 @@
> 
>  #include "common.h"
> 
> +#define PMC0_CTRL		0x28
> +#define BM_CTRL_LDOEN		BIT(31)
> +
> +#define SMC_PMPROT		0x8
>  #define SMC_PMCTRL		0x10
>  #define BP_PMCTRL_PSTOPO        16
>  #define PSTOPO_PSTOP3		0x3
> @@ -25,7 +29,10 @@
>  #define BM_PMCTRL_RUNM		(3 << BP_PMCTRL_RUNM)
>  #define BM_PMCTRL_STOPM		(7 << BP_PMCTRL_STOPM)
> 
> +#define BM_PMPROT_AHSRUN	BIT(7)
> +
>  static void __iomem *smc1_base;
> +static void __iomem *pmc0_base;
> 
>  int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode)  { @@ -65,5 +72,13
> @@ void __init imx7ulp_pm_init(void)
>  	of_node_put(np);
>  	WARN_ON(!smc1_base);
> 
> +	np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-pmc0");
> +	pmc0_base = of_iomap(np, 0);
> +	WARN_ON(!pmc0_base);
> +	of_node_put(np);
> +
> +	if (!(readl_relaxed(pmc0_base + PMC0_CTRL) & BM_CTRL_LDOEN))
> +		writel_relaxed(BM_PMPROT_AHSRUN, smc1_base + SMC_PMPROT);

When will HSRUN mode be enabled? E.g. RUNM=HSRUN
It seems RUNM will be cleared in the following imx7ulp_set_lpm().

Regards
Aisheng

> +
>  	imx7ulp_set_lpm(ULP_PM_RUN);
>  }
> --
> 2.28.0