[PATCH v4 2/3] soundwire: qcom: add support to block packing mode

[Srinivas Kandagatla]

This patch adds support to block pack mode, which is required
on Qcom soundwire controllers v1.5.x on few ports!

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
 drivers/soundwire/qcom.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index c1bb35884182..16023b5bcbd5 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -54,6 +54,7 @@
 #define SWRM_MCP_SLV_STATUS					0x1090
 #define SWRM_MCP_SLV_STATUS_MASK				GENMASK(1, 0)
 #define SWRM_DP_PORT_CTRL_BANK(n, m)	(0x1124 + 0x100 * (n - 1) + 0x40 * m)
+#define SWRM_DP_BLOCK_CTRL3_BANK(n, m)	(0x1138 + 0x100 * (n - 1) + 0x40 * m)
 #define SWRM_DP_PORT_CTRL_EN_CHAN_SHFT				0x18
 #define SWRM_DP_PORT_CTRL_OFFSET2_SHFT				0x10
 #define SWRM_DP_PORT_CTRL_OFFSET1_SHFT				0x08
@@ -82,6 +83,7 @@ struct qcom_swrm_port_config {
 	u8 si;
 	u8 off1;
 	u8 off2;
+	u8 bp_mode;
 };
 
 struct qcom_swrm_ctrl {
@@ -392,14 +394,22 @@ static int qcom_swrm_transport_params(struct sdw_bus *bus,
 {
 	struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus);
 	u32 value;
+	int reg = SWRM_DP_PORT_CTRL_BANK((params->port_num), bank);
+	int ret;
 
 	value = params->offset1 << SWRM_DP_PORT_CTRL_OFFSET1_SHFT;
 	value |= params->offset2 << SWRM_DP_PORT_CTRL_OFFSET2_SHFT;
 	value |= params->sample_interval - 1;
 
-	return ctrl->reg_write(ctrl,
-			       SWRM_DP_PORT_CTRL_BANK((params->port_num), bank),
-			       value);
+	ret = ctrl->reg_write(ctrl, reg, value);
+
+	if (!ret && params->blk_pkg_mode) {
+		reg = SWRM_DP_BLOCK_CTRL3_BANK(params->port_num, bank);
+
+		ret = ctrl->reg_write(ctrl, reg, 1);
+	}
+
+	return ret;
 }
 
 static int qcom_swrm_port_enable(struct sdw_bus *bus,
@@ -447,6 +457,7 @@ static int qcom_swrm_compute_params(struct sdw_bus *bus)
 			p_rt->transport_params.sample_interval = pcfg->si + 1;
 			p_rt->transport_params.offset1 = pcfg->off1;
 			p_rt->transport_params.offset2 = pcfg->off2;
+			p_rt->transport_params.blk_pkg_mode = pcfg->bp_mode;
 		}
 
 		list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
@@ -457,6 +468,7 @@ static int qcom_swrm_compute_params(struct sdw_bus *bus)
 					pcfg->si + 1;
 				p_rt->transport_params.offset1 = pcfg->off1;
 				p_rt->transport_params.offset2 = pcfg->off2;
+				p_rt->transport_params.blk_pkg_mode = pcfg->bp_mode;
 				i++;
 			}
 		}
@@ -703,6 +715,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
 	u8 off1[QCOM_SDW_MAX_PORTS];
 	u8 off2[QCOM_SDW_MAX_PORTS];
 	u8 si[QCOM_SDW_MAX_PORTS];
+	u8 bp_mode[QCOM_SDW_MAX_PORTS] = { 0, };
 	int i, ret, nports, val;
 
 	ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val);
@@ -745,10 +758,13 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
 	if (ret)
 		return ret;
 
+	ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode",
+					bp_mode, nports);
 	for (i = 0; i < nports; i++) {
 		ctrl->pconfig[i].si = si[i];
 		ctrl->pconfig[i].off1 = off1[i];
 		ctrl->pconfig[i].off2 = off2[i];
+		ctrl->pconfig[i].bp_mode = bp_mode[i];
 	}
 
 	return 0;
-- 
2.21.0