Re: [PATCH v3 0/3] Add interconnect sync state support

[Saravana Kannan]

Reviewed-by: Saravana Kannan <saravanak@xxxxxxxxxx>

to all 3 patches in the series.

-Saravana

On Tue, Aug 25, 2020 at 10:01 AM Georgi Djakov <georgi.djakov@xxxxxxxxxx> wrote:
>
> Bootloaders often leave some system resources enabled such as clocks,
> regulators, interconnects etc. We want to keep these resources enabled
> until all their consumers are probed. These resources are often shared,
> so we must wait for all the consumers to come up, before deciding
> whether to turn them off or change the configuration. This patchset is
> trying to solve the above problem just for the on-chip interconnects.
>
> The problem is solved by allowing the providers to implement the get_bw()
> function which should return the current average/peak bandwidth. These are
> used as floor values, that are enforced during boot while the requests from
> all consumers are being collected. Then the sync_state() callback is used
> to signal that all consumers have been probed, meaning that the floor
> bandwidth is not needed anymore and the framework is ready to re-aggregate
> and process all requests. If get_bw() is not implemented, the framework
> will use INT_MAX as default bandwidth value.
>
> v3:
> * Go back to introducing the get_bw() function as in v1. (Saravana)
> * If querying the current bandwidth is not supported, max out the
>   bandwidth. (Saravana)
> * Use icc_sync_state also for sc7180.
>
> v2: https://lore.kernel.org/r/20200722110139.24778-1-georgi.djakov@xxxxxxxxxx/
> * Support initial values for both average and peak bandwidth (Mike)
> * Skip aggregating/setting for nodes that don't specify initial bw (Mike)
> * Drop patch 2/4: Add get_bw() callback (Mike)
> * Squash patches 3 and 4.
>
> v1: https://lore.kernel.org/lkml/20200709110705.30359-1-georgi.djakov@xxxxxxxxxx/
>
> Georgi Djakov (3):
>   interconnect: Add get_bw() callback
>   interconnect: Add sync state support
>   interconnect: qcom: Use icc_sync_state
>
>  drivers/interconnect/core.c           | 67 +++++++++++++++++++++++++++
>  drivers/interconnect/qcom/osm-l3.c    |  1 +
>  drivers/interconnect/qcom/sc7180.c    |  1 +
>  drivers/interconnect/qcom/sdm845.c    |  1 +
>  include/linux/interconnect-provider.h |  7 +++
>  5 files changed, 77 insertions(+)
>