Re: [PATCH v6 4/4] bus: mhi: Add userspace client interface driver

[Jeffrey Hugo]

On 9/16/2020 1:56 PM, Hemant Kumar wrote:
> This MHI client driver allows userspace clients to transfer
> raw data between MHI device and host using standard file operations.
> Device file node is created with format
>
> /dev/mhi_<controller_name>_<mhi_device_name>
>
> Currently it supports LOOPBACK channel.
>
> Signed-off-by: Hemant Kumar <hemantk@xxxxxxxxxxxxxx>
> ---
>   drivers/bus/mhi/Kconfig  |  13 +
>   drivers/bus/mhi/Makefile |   4 +
>   drivers/bus/mhi/uci.c    | 657 +++++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 674 insertions(+)
>   create mode 100644 drivers/bus/mhi/uci.c
>
> diff --git a/drivers/bus/mhi/Kconfig b/drivers/bus/mhi/Kconfig
> index 6a217ff..8aebe8b 100644
> --- a/drivers/bus/mhi/Kconfig
> +++ b/drivers/bus/mhi/Kconfig
> @@ -20,3 +20,16 @@ config MHI_BUS_DEBUG
>   	 Enable debugfs support for use with the MHI transport. Allows
>   	 reading and/or modifying some values within the MHI controller
>   	 for debug and test purposes.
> +
> +config MHI_UCI
> +       tristate "MHI UCI"
> +       depends on MHI_BUS
> +       help
> +	 MHI based userspace client interface driver is used for transferring
> +	 raw data between host and device using standard file operations from
> +	 userspace. Open, read, write, and close operations are supported
> +	 by this driver. Please check mhi_uci_match_table for all supported
> +	 channels that are exposed to userspace.
> +
> +	 To compile this driver as a module, choose M here: the module will be
> +	 called mhi_uci.
> diff --git a/drivers/bus/mhi/Makefile b/drivers/bus/mhi/Makefile
> index 19e6443..80feefb 100644
> --- a/drivers/bus/mhi/Makefile
> +++ b/drivers/bus/mhi/Makefile
> @@ -1,2 +1,6 @@
>   # core layer
>   obj-y += core/
> +
> +# MHI client
> +mhi_uci-y := uci.o
> +obj-$(CONFIG_MHI_UCI) += mhi_uci.o
> diff --git a/drivers/bus/mhi/uci.c b/drivers/bus/mhi/uci.c
> new file mode 100644
> index 0000000..d6758f2
> --- /dev/null
> +++ b/drivers/bus/mhi/uci.c
> @@ -0,0 +1,657 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.*/
> +
> +#include <linux/kernel.h>
> +#include <linux/mhi.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/poll.h>
> +
> +#define DEVICE_NAME "mhi"
> +#define MHI_UCI_DRIVER_NAME "mhi_uci"
> +#define MAX_UCI_MINORS (128)
> +
> +static DEFINE_IDR(uci_idr);
> +static DEFINE_MUTEX(uci_idr_mutex);
> +static struct class *uci_dev_class;
> +static int uci_dev_major;
> +
> +/**
> + * struct uci_chan - MHI channel for a uci device
> + * @wq: wait queue for reader/writer
> + * @lock: spin lock
> + * @pending: list of rx buffers userspace is waiting to read
> + * @cur_buf: current buffer userspace is reading
> + * @rx_size: size of the current rx buffer userspace is reading
> + */
> +struct uci_chan {
> +	wait_queue_head_t wq;
> +
> +	/* protects pending and cur_buf members in bh context */
> +	spinlock_t lock;
> +
> +	struct list_head pending;
> +	struct uci_buf *cur_buf;
> +	size_t rx_size;
> +};
> +
> +/**
> + * struct uci_buf - uci buffer
> + * @data: data buffer
> + * @len: length of data buffer
> + * @node: list node of the uci buffer
> + */
> +struct uci_buf {
> +	void *data;
> +	size_t len;
> +	struct list_head node;
> +};
> +
> +/**
> + * struct uci_dev - MHI uci device
> + * @minor: uci device node minor number
> + * @mhi_dev: associated mhi device object
> + * @chan: MHI channel name
> + * @lock: mutex lock
> + * @ul_chan: uplink uci channel object
> + * @dl_chan: downlink uci channel object
> + * @mtu: max tx buffer length
> + * @actual_mtu: maximum size of incoming buffer
> + * @open: open called for device node
> + * @enabled: uci device probed
> + * @ref_count: uci_dev reference count
> + */
> +struct uci_dev {
> +	unsigned int minor;
> +	struct mhi_device *mhi_dev;
> +	const char *chan;
> +
> +	/* protects uci_dev struct members */
> +	struct mutex lock;
> +
> +	struct uci_chan ul_chan;
> +	struct uci_chan dl_chan;
> +	size_t mtu;
> +	size_t actual_mtu;
> +	bool enabled;
> +	struct kref ref_count;
> +};
> +
> +static int mhi_queue_inbound(struct uci_dev *udev)
> +{
> +	struct mhi_device *mhi_dev = udev->mhi_dev;
> +	struct device *dev = &mhi_dev->dev;
> +	size_t mtu = udev->mtu;
> +	size_t actual_mtu = udev->actual_mtu;
> +	int nr_trbs, i, ret = -EIO;
> +	void *buf;
> +	struct uci_buf *uci_buf;
> +
> +	nr_trbs = mhi_get_no_free_descriptors(mhi_dev, DMA_FROM_DEVICE);
> +
> +	for (i = 0; i < nr_trbs; i++) {
> +		buf = kmalloc(mtu, GFP_KERNEL);
> +		if (!buf)
> +			return -ENOMEM;
> +
> +		uci_buf = buf + actual_mtu;
> +		uci_buf->data = buf;
> +
> +		dev_dbg(dev, "Allocated buf %d of %d size %ld\n", i, nr_trbs,
> +			actual_mtu);
> +
> +		ret = mhi_queue_buf(mhi_dev, DMA_FROM_DEVICE, buf, actual_mtu,
> +				    MHI_EOT);
> +		if (ret) {
> +			kfree(buf);
> +			dev_err(dev, "Failed to queue buffer %d\n", i);
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static void mhi_uci_dev_release(struct kref *ref)
> +{
> +	struct uci_dev *udev =
> +		container_of(ref, struct uci_dev, ref_count);
> +
> +	mutex_destroy(&udev->lock);
> +
> +	dev_set_drvdata(&udev->mhi_dev->dev, NULL);
> +
> +	kfree(udev);
> +}
> +
> +static int mhi_uci_release(struct inode *inode, struct file *file)
> +{
> +	struct uci_dev *udev = file->private_data;
> +	struct uci_buf *itr, *tmp;
> +	struct uci_chan *uchan;
> +
> +	if (kref_read(&udev->ref_count) > 2)
> +		goto exit_uci_release;
> +
> +	if (udev->enabled)
> +		mhi_unprepare_from_transfer(udev->mhi_dev);
> +
> +	/* clean inbound channel */
> +	uchan = &udev->dl_chan;
> +
> +	spin_lock_bh(&uchan->lock);
> +	list_for_each_entry_safe(itr, tmp, &uchan->pending, node) {
> +		list_del(&itr->node);
> +		kfree(itr->data);
> +	}
> +
> +	if (uchan->cur_buf)
> +		kfree(uchan->cur_buf->data);
> +
> +	uchan->cur_buf = NULL;
> +	spin_unlock_bh(&uchan->lock);
> +
> +exit_uci_release:
> +	kref_put(&udev->ref_count, mhi_uci_dev_release);
> +
> +	return 0;
> +}
> +
> +static __poll_t mhi_uci_poll(struct file *file, poll_table *wait)
> +{
> +	struct uci_dev *udev = file->private_data;
> +	struct mhi_device *mhi_dev = udev->mhi_dev;
> +	struct device *dev = &mhi_dev->dev;
> +	struct uci_chan *uchan;
> +	__poll_t mask = 0;
> +
> +	poll_wait(file, &udev->dl_chan.wq, wait);
> +	poll_wait(file, &udev->ul_chan.wq, wait);
> +
> +	if (!udev->enabled) {
> +		mask = EPOLLERR;
> +	} else {
> +		uchan = &udev->dl_chan;
> +		spin_lock_bh(&uchan->lock);
> +		if (!list_empty(&uchan->pending) || uchan->cur_buf) {
> +			dev_dbg(dev, "Client can read from node\n");
> +			mask |= EPOLLIN | EPOLLRDNORM;
> +		}
> +		spin_unlock_bh(&uchan->lock);
> +	}
> +
> +	if (!udev->enabled) {
> +		mask |= EPOLLERR;
> +	} else if (mhi_get_no_free_descriptors(mhi_dev, DMA_TO_DEVICE) > 0) {
> +		dev_dbg(dev, "Client can write to node\n");
> +		mask |= EPOLLOUT | EPOLLWRNORM;
> +	}
> +
> +	dev_dbg(dev, "Client attempted to poll, returning mask 0x%x\n", mask);
> +
> +	return mask;
> +}
> +
> +static ssize_t mhi_uci_write(struct file *file,
> +			     const char __user *buf,
> +			     size_t count,
> +			     loff_t *offp)
> +{
> +	struct uci_dev *udev = file->private_data;
> +	struct mhi_device *mhi_dev = udev->mhi_dev;
> +	struct device *dev = &mhi_dev->dev;
> +	struct uci_chan *uchan = &udev->ul_chan;
> +	size_t bytes_xfered = 0;
> +	int ret, nr_avail = 0;
> +
> +	if (!buf || !count)
> +		return -EINVAL;
> +
> +	/* confirm channel is active */
> +	mutex_lock(&udev->lock);
> +	if (!udev->enabled) {
> +		ret = -ENODEV;
> +		goto err_mtx_unlock;
> +	}
> +
> +	dev_dbg(dev, "%s: to xfer: %lu bytes\n", __func__, count);
> +
> +	while (count) {
> +		size_t xfer_size;
> +		void *kbuf;
> +		enum mhi_flags flags;
> +
> +		mutex_unlock(&udev->lock);
> +		/* wait for free descriptors */
> +		ret = wait_event_interruptible(uchan->wq,
> +					       (!udev->enabled) ||
> +				(nr_avail = mhi_get_no_free_descriptors(mhi_dev,
> +					       DMA_TO_DEVICE)) > 0);
> +
> +		mutex_lock(&udev->lock);

It feels like there is a race here.  What if we wait because there are 
no free descriptors, one becomes available, but someone else manages to 
grab the mutex before we do, and consume it?  mhi_queue_buf() will fail 
later on, and I don't think thats intended.

> +		if (ret == -ERESTARTSYS) {
> +			dev_dbg(dev, "Exit signal caught for node\n");
> +			goto err_mtx_unlock;
> +		}
> +
> +		if (!udev->enabled) {
> +			ret = -ENODEV;
> +			goto err_mtx_unlock;
> +		}
> +
> +		xfer_size = min_t(size_t, count, udev->mtu);
> +		kbuf = kmalloc(xfer_size, GFP_KERNEL);
> +		if (!kbuf) {
> +			ret = -ENOMEM;
> +			goto err_mtx_unlock;
> +		}
> +
> +		ret = copy_from_user(kbuf, buf, xfer_size);
> +		if (ret) {
> +			kfree(kbuf);
> +			ret = -EFAULT;
> +			goto err_mtx_unlock;
> +		}
> +
> +		/* if ring is full after this force EOT */
> +		if (nr_avail > 1 && (count - xfer_size))
> +			flags = MHI_CHAIN;
> +		else
> +			flags = MHI_EOT;
> +
> +		if (udev->enabled)
> +			ret = mhi_queue_buf(mhi_dev, DMA_TO_DEVICE, kbuf,
> +					    xfer_size, flags);
> +		else
> +			ret = -ENODEV;
> +
> +		if (ret) {
> +			kfree(kbuf);
> +			goto err_mtx_unlock;
> +		}
> +
> +		bytes_xfered += xfer_size;
> +		count -= xfer_size;
> +		buf += xfer_size;
> +	}
> +
> +	mutex_unlock(&udev->lock);
> +	dev_dbg(dev, "%s: bytes xferred: %lu\n", __func__, bytes_xfered);
> +
> +	return bytes_xfered;
> +
> +err_mtx_unlock:
> +	mutex_unlock(&udev->lock);
> +
> +	return ret;
> +}
> +
> +static ssize_t mhi_uci_read(struct file *file,
> +			    char __user *buf,
> +			    size_t count,
> +			    loff_t *ppos)
> +{
> +	struct uci_dev *udev = file->private_data;
> +	struct mhi_device *mhi_dev = udev->mhi_dev;
> +	struct uci_chan *uchan = &udev->dl_chan;
> +	struct device *dev = &mhi_dev->dev;
> +	struct uci_buf *ubuf;
> +	char *ptr;
> +	size_t to_copy;
> +	int ret = 0;
> +
> +	if (!buf)
> +		return -EINVAL;
> +
> +	mutex_lock(&udev->lock);
> +	/* confirm channel is active */
> +	if (!udev->enabled) {
> +		ret = -ENODEV;
> +		goto err_mtx_unlock;
> +	}
> +
> +	spin_lock_bh(&uchan->lock);
> +	/* No data available to read, wait */
> +	if (!uchan->cur_buf && list_empty(&uchan->pending)) {
> +		dev_dbg(dev, "No data available to read waiting\n");
> +
> +		spin_unlock_bh(&uchan->lock);
> +		mutex_unlock(&udev->lock);
> +		ret = wait_event_interruptible(uchan->wq,
> +					       (!udev->enabled ||
> +					      !list_empty(&uchan->pending)));
> +
> +		mutex_lock(&udev->lock);
> +		if (ret == -ERESTARTSYS) {
> +			dev_dbg(dev, "Exit signal caught for node\n");
> +			goto err_mtx_unlock;
> +		}
> +
> +		if (!udev->enabled) {
> +			ret = -ENODEV;
> +			goto err_mtx_unlock;
> +		}
> +		spin_lock_bh(&uchan->lock);
> +	}
> +
> +	/* new read, get the next descriptor from the list */
> +	if (!uchan->cur_buf) {
> +		ubuf = list_first_entry_or_null(&uchan->pending,
> +						struct uci_buf, node);
> +		if (!ubuf) {
> +			ret = -EIO;
> +			goto err_spin_unlock;
> +		}
> +
> +		list_del(&ubuf->node);
> +		uchan->cur_buf = ubuf;
> +		uchan->rx_size = ubuf->len;
> +		dev_dbg(dev, "Got pkt of size: %zu\n", uchan->rx_size);
> +	}
> +
> +	ubuf = uchan->cur_buf;
> +
> +	/* Copy the buffer to user space */
> +	to_copy = min_t(size_t, count, uchan->rx_size);
> +	ptr = ubuf->data + (ubuf->len - uchan->rx_size);
> +	spin_unlock_bh(&uchan->lock);
> +
> +	ret = copy_to_user(buf, ptr, to_copy);
> +	if (ret) {
> +		ret = -EFAULT;
> +		goto err_mtx_unlock;
> +	}
> +
> +	spin_lock_bh(&uchan->lock);
> +
> +	dev_dbg(dev, "Copied %lu of %lu bytes\n", to_copy, uchan->rx_size);
> +	uchan->rx_size -= to_copy;
> +
> +	/* we finished with this buffer, queue it back to hardware */
> +	if (!uchan->rx_size) {
> +		uchan->cur_buf = NULL;
> +
> +		if (udev->enabled)
> +			ret = mhi_queue_buf(mhi_dev, DMA_FROM_DEVICE,
> +					    ubuf->data,
> +					    udev->actual_mtu, MHI_EOT);
> +		else
> +			ret = -ENODEV;
> +
> +		if (ret) {
> +			dev_err(dev, "Failed to recycle element: %d\n", ret);
> +			kfree(ubuf->data);
> +			goto err_spin_unlock;
> +		}
> +	}
> +	spin_unlock_bh(&uchan->lock);
> +	mutex_unlock(&udev->lock);
> +
> +	dev_dbg(dev, "%s: Returning %lu bytes\n", __func__, to_copy);
> +
> +	return to_copy;
> +
> +err_spin_unlock:
> +	spin_unlock_bh(&uchan->lock);
> +err_mtx_unlock:
> +	mutex_unlock(&udev->lock);
> +	return ret;
> +}
> +
> +static int mhi_uci_open(struct inode *inode, struct file *filp)
> +{
> +	struct uci_dev *udev = NULL;
> +	unsigned int minor = iminor(inode);
> +	int ret = -EIO;
> +	struct uci_buf *buf_itr, *tmp;
> +	struct uci_chan *dl_chan;
> +	struct mhi_device *mhi_dev;
> +	struct device *dev;
> +
> +	mutex_lock(&uci_idr_mutex);
> +	udev = idr_find(&uci_idr, minor);
> +	mutex_unlock(&uci_idr_mutex);
> +	if (!udev) {
> +		pr_err("uci dev: minor %d not found\n", minor);
> +		ret = -ENODEV;
> +		goto error_no_dev;
> +	}
> +
> +	kref_get(&udev->ref_count);
> +
> +	mhi_dev = udev->mhi_dev;

mhi_dev never gets used.  You could use it down at the 
prepare_for_transfer, but you don't.  Might as well just remove this 
from the stack.

> +	dev = &mhi_dev->dev;
> +
> +	mutex_lock(&udev->lock);
> +	if (kref_read(&udev->ref_count) > 2) {
> +		dev_dbg(dev, "Node already opened\n");
> +		goto exit_uci_open;
> +	}
> +
> +	if (!udev->enabled) {
> +		dev_info(dev, "Node exists, but is not in active state!\n");
> +		goto error_open_chan;
> +	}
> +
> +	dev_dbg(dev, "Starting channel\n");
> +	ret = mhi_prepare_for_transfer(udev->mhi_dev);
> +	if (ret) {
> +		dev_err(dev, "Error starting transfer channels\n");
> +		goto error_open_chan;
> +	}
> +
> +	ret = mhi_queue_inbound(udev);
> +	if (ret)
> +		goto error_rx_queue;
> +
> +exit_uci_open:
> +	filp->private_data = udev;
> +	mutex_unlock(&udev->lock);
> +
> +	return 0;
> +
> +error_rx_queue:
> +	dl_chan = &udev->dl_chan;
> +	mhi_unprepare_from_transfer(udev->mhi_dev);
> +	list_for_each_entry_safe(buf_itr, tmp, &dl_chan->pending, node) {
> +		list_del(&buf_itr->node);
> +		kfree(buf_itr->data);
> +	}
> +error_open_chan:
> +	mutex_unlock(&udev->lock);
> +	kref_put(&udev->ref_count, mhi_uci_dev_release);
> +error_no_dev:
> +	return ret;
> +}
> +
> +static const struct file_operations mhidev_fops = {
> +	.owner = THIS_MODULE,
> +	.open = mhi_uci_open,
> +	.release = mhi_uci_release,
> +	.read = mhi_uci_read,
> +	.write = mhi_uci_write,
> +	.poll = mhi_uci_poll,
> +};
> +
> +static void mhi_ul_xfer_cb(struct mhi_device *mhi_dev,
> +			   struct mhi_result *mhi_result)
> +{
> +	struct uci_dev *udev = dev_get_drvdata(&mhi_dev->dev);
> +	struct uci_chan *uchan = &udev->ul_chan;
> +	struct device *dev = &mhi_dev->dev;
> +
> +	dev_dbg(dev, "status: %d xfer_len: %zu\n",
> +		mhi_result->transaction_status, mhi_result->bytes_xferd);
> +
> +	kfree(mhi_result->buf_addr);
> +
> +	if (!mhi_result->transaction_status)
> +		wake_up(&uchan->wq);
> +}
> +
> +static void mhi_dl_xfer_cb(struct mhi_device *mhi_dev,
> +			   struct mhi_result *mhi_result)
> +{
> +	struct uci_dev *udev = dev_get_drvdata(&mhi_dev->dev);
> +	struct uci_chan *uchan = &udev->dl_chan;
> +	struct device *dev = &mhi_dev->dev;
> +	struct uci_buf *buf;
> +
> +	dev_dbg(dev, "status: %d receive_len: %zu\n",
> +		mhi_result->transaction_status, mhi_result->bytes_xferd);
> +
> +	if (mhi_result->transaction_status == -ENOTCONN) {
> +		kfree(mhi_result->buf_addr);
> +		return;
> +	}
> +
> +	spin_lock_bh(&uchan->lock);
> +	buf = mhi_result->buf_addr + udev->actual_mtu;
> +	buf->data = mhi_result->buf_addr;
> +	buf->len = mhi_result->bytes_xferd;
> +	list_add_tail(&buf->node, &uchan->pending);
> +	spin_unlock_bh(&uchan->lock);
> +
> +	wake_up(&uchan->wq);
> +}
> +
> +static int mhi_uci_probe(struct mhi_device *mhi_dev,
> +			 const struct mhi_device_id *id)
> +{
> +	struct uci_dev *udev;
> +	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
> +	struct device *dev;
> +	int index, dir;
> +
> +	udev = kzalloc(sizeof(*udev), GFP_KERNEL);

What if you defer creating the udev until the first open(), and tie the 
xfer prepare state to the ref count of the udev instance?

> +	if (!udev)
> +		return -ENOMEM;
> +
> +	kref_init(&udev->ref_count);
> +	mutex_init(&udev->lock);
> +	udev->mhi_dev = mhi_dev;
> +
> +	mutex_lock(&udev->lock);
> +
> +	mutex_lock(&uci_idr_mutex);
> +	index = idr_alloc(&uci_idr, udev, 0, MAX_UCI_MINORS, GFP_KERNEL);
> +	mutex_unlock(&uci_idr_mutex);
> +	if (index < 0) {
> +		mutex_unlock(&udev->lock);
> +		kfree(udev);
> +		return index;
> +	}
> +
> +	udev->minor = index;
> +
> +	/* create device file node /dev/mhi_<cntrl_dev_name>_<mhi_dev_name> */
> +	dev = device_create(uci_dev_class, &mhi_dev->dev,
> +			    MKDEV(uci_dev_major, index), udev,
> +			    DEVICE_NAME "_%s_%s",

DEVICE_NAME is only used here.  Doesn't seem like having a macro is 
providing much value.  I suggest just inlining the value.

> +			    dev_name(mhi_cntrl->cntrl_dev), mhi_dev->name);
> +	if (IS_ERR(dev)) {
> +		mutex_lock(&uci_idr_mutex);
> +		idr_remove(&uci_idr, udev->minor);
> +		mutex_unlock(&uci_idr_mutex);
> +		mutex_unlock(&udev->lock);
> +		kfree(udev);
> +		return PTR_ERR(dev);
> +	}
> +
> +	for (dir = 0; dir < 2; dir++) {
> +		struct uci_chan *uchan = (dir) ?
> +			&udev->ul_chan : &udev->dl_chan;
> +		spin_lock_init(&uchan->lock);
> +		init_waitqueue_head(&uchan->wq);
> +		INIT_LIST_HEAD(&uchan->pending);
> +	}
> +
> +	udev->mtu = min_t(size_t, id->driver_data, MHI_MAX_MTU);
> +	udev->actual_mtu = udev->mtu - sizeof(struct uci_buf);

"mtu" vs "actual_mtu" seems to be very confusing.  To start, why not 
"tx_mtu" and "rx_mtu"?  But going from there, why have different mtus 
for tx and rx?  Why not just increase the rx allocations by the required 
"header" (struct uci_buf) as needed to keep symetry?

> +	dev_set_drvdata(&mhi_dev->dev, udev);
> +	udev->enabled = true;
> +
> +	mutex_unlock(&udev->lock);
> +
> +	dev_info(&mhi_dev->dev, "probed uci dev: minor %d\n", index);
> +
> +	return 0;
> +};
> +
> +static void mhi_uci_remove(struct mhi_device *mhi_dev)
> +{
> +	struct uci_dev *udev = dev_get_drvdata(&mhi_dev->dev);
> +
> +	mutex_lock(&udev->lock);
> +
> +	/* disable the node */
> +	udev->enabled = false;
> +
> +	wake_up(&udev->dl_chan.wq);
> +	wake_up(&udev->ul_chan.wq);
> +
> +	/* delete the node to prevent new opens */
> +	device_destroy(uci_dev_class, MKDEV(uci_dev_major, udev->minor));
> +
> +	mutex_lock(&uci_idr_mutex);
> +	idr_remove(&uci_idr, udev->minor);
> +	mutex_unlock(&uci_idr_mutex);
> +
> +	mutex_unlock(&udev->lock);
> +
> +	kref_put(&udev->ref_count, mhi_uci_dev_release);
> +}
> +
> +/* .driver_data stores max mtu */
> +static const struct mhi_device_id mhi_uci_match_table[] = {
> +	{ .chan = "LOOPBACK", .driver_data = 0x1000},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(mhi, mhi_uci_match_table);
> +
> +static struct mhi_driver mhi_uci_driver = {
> +	.id_table = mhi_uci_match_table,
> +	.remove = mhi_uci_remove,
> +	.probe = mhi_uci_probe,
> +	.ul_xfer_cb = mhi_ul_xfer_cb,
> +	.dl_xfer_cb = mhi_dl_xfer_cb,
> +	.driver = {
> +		.name = MHI_UCI_DRIVER_NAME,
> +	},
> +};
> +
> +static int mhi_uci_init(void)
> +{
> +	int ret;
> +
> +	ret = register_chrdev(0, MHI_UCI_DRIVER_NAME, &mhidev_fops);
> +	if (ret < 0)
> +		return ret;
> +
> +	uci_dev_major = ret;
> +	uci_dev_class = class_create(THIS_MODULE, MHI_UCI_DRIVER_NAME);
> +	if (IS_ERR(uci_dev_class)) {
> +		unregister_chrdev(uci_dev_major, MHI_UCI_DRIVER_NAME);
> +		return -ENODEV;
> +	}
> +
> +	ret = mhi_driver_register(&mhi_uci_driver);
> +	if (ret) {
> +		class_destroy(uci_dev_class);
> +		unregister_chrdev(uci_dev_major, MHI_UCI_DRIVER_NAME);
> +	}
> +
> +	return ret;
> +}
> +
> +static void __exit mhi_uci_exit(void)
> +{
> +	mhi_driver_unregister(&mhi_uci_driver);
> +	class_destroy(uci_dev_class);
> +	unregister_chrdev(uci_dev_major, MHI_UCI_DRIVER_NAME);

I think you need an idr_destroy() of uci_idr here.

> +}
> +
> +module_init(mhi_uci_init);
> +module_exit(mhi_uci_exit);
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("MHI UCI Driver");

--
Jeffrey Hugo
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.