[PATCH v2 2/6] power: supply: bq27xxx: report "not charging" on all types

[Krzysztof Kozlowski]

Commit 6f24ff97e323 ("power: supply: bq27xxx_battery: Add the
BQ27Z561 Battery monitor") and commit d74534c27775 ("power:
bq27xxx_battery: Add support for additional bq27xxx family devices")
added support for new device types by copying most of the code and
adding necessary quirks.

However they did not copy the code in bq27xxx_battery_status()
responsible for returning POWER_SUPPLY_STATUS_NOT_CHARGING.

Unify the bq27xxx_battery_status() so for all types when charger is
supplied, it will return "not charging" status.

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

---

Not tested on BQ27Z561 or other types of batteries. Tested however on
bq34z100.
---
 drivers/power/supply/bq27xxx_battery.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 92de7b720182..65806f668b1f 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -1765,8 +1765,6 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 			status = POWER_SUPPLY_STATUS_FULL;
 		else if (di->cache.flags & BQ27000_FLAG_CHGS)
 			status = POWER_SUPPLY_STATUS_CHARGING;
-		else if (power_supply_am_i_supplied(di->bat) > 0)
-			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else
 			status = POWER_SUPPLY_STATUS_DISCHARGING;
 	} else if (di->opts & BQ27Z561_O_BITS) {
@@ -1785,6 +1783,10 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 			status = POWER_SUPPLY_STATUS_CHARGING;
 	}
 
+	if ((status == POWER_SUPPLY_STATUS_DISCHARGING) &&
+	    (power_supply_am_i_supplied(di->bat) > 0))
+		status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
 	val->intval = status;
 
 	return 0;
-- 
2.17.1