[PATCH v7 0/4] Add Caninos Loucos Labrador CoM and Base Board Device Tree

[Matheus Castello]

I'm adding to the series the new Labrador v3, since it uses the same vendor
prefix. Thanks Andreas, Mani and Rob for your time reviewing it.

Changes since v6:
- Add new caninos,labrador-v3 CoM and caninos,labrador-base-m2 base board
- Improve Model description

Changes since v5:
(Suggested by Andreas Färber)
- Put caninos,labrador-v2 as const one level down

Matheus Castello (4):
  dt-bindings: Add vendor prefix for Caninos Loucos
  dt-bindings: arm: actions: Document Caninos Loucos Labrador
  ARM: dts: Add Caninos Loucos Labrador v2
  arm64: dts: Add Caninos Loucos Labrador v3

 .../devicetree/bindings/arm/actions.yaml      |  10 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   1 +
 .../arm/boot/dts/owl-s500-labrador-base-m.dts |  35 +++++
 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi   |  22 ++++
 arch/arm64/boot/dts/actions/Makefile          |   2 +
 .../dts/actions/s700-labrador-base-m2.dts     |  34 +++++
 .../boot/dts/actions/s700-labrador-v3.dtsi    | 122 ++++++++++++++++++
 8 files changed, 228 insertions(+)
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-base-m.dts
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
 create mode 100644 arch/arm64/boot/dts/actions/s700-labrador-base-m2.dts
 create mode 100644 arch/arm64/boot/dts/actions/s700-labrador-v3.dtsi

--
2.28.0