Re: [PATCH 2/3] drm/ingenic: Reset pixclock rate when parent clock rate changes

[Sam Ravnborg]

Hi Paul.

On Tue, Sep 15, 2020 at 02:38:17PM +0200, Paul Cercueil wrote:
> Old Ingenic SoCs can overclock very well, up to +50% of their nominal
> clock rate, whithout requiring overvolting or anything like that, just
> by changing the rate of the main PLL. Unfortunately, all clocks on the
> system are derived from that PLL, and when the PLL rate is updated, so
> is our pixel clock.
> 
> To counter that issue, we make sure that the panel is in VBLANK before
> the rate change happens, and we will then re-set the pixel clock rate
> afterwards, once the PLL has been changed, to be as close as possible to
> the pixel rate requested by the encoder.
> 
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 49 ++++++++++++++++++++++-
>  1 file changed, 48 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> index fb62869befdc..aa32660033d2 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> @@ -12,6 +12,7 @@
>  #include <linux/dma-noncoherent.h>
>  #include <linux/io.h>
>  #include <linux/module.h>
> +#include <linux/mutex.h>
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
>  #include <linux/regmap.h>
> @@ -73,6 +74,9 @@ struct ingenic_drm {
>  
>  	bool panel_is_sharp;
>  	bool no_vblank;
> +	bool update_clk_rate;
> +	struct mutex clk_mutex;
Please add comment about what the mutex protects.
Especially since the mutex is locked and unlocked based on a
notification.

With the comment added:
Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>

> +	struct notifier_block clock_nb;
>  };
>  
>  static bool ingenic_drm_cached_gem_buf;
> @@ -115,6 +119,29 @@ static inline struct ingenic_drm *drm_crtc_get_priv(struct drm_crtc *crtc)
>  	return container_of(crtc, struct ingenic_drm, crtc);
>  }
>  
> +static inline struct ingenic_drm *drm_nb_get_priv(struct notifier_block *nb)
> +{
> +	return container_of(nb, struct ingenic_drm, clock_nb);
> +}
> +
> +static int ingenic_drm_update_pixclk(struct notifier_block *nb,
> +				     unsigned long action,
> +				     void *data)
> +{
> +	struct ingenic_drm *priv = drm_nb_get_priv(nb);
> +
> +	switch (action) {
> +	case PRE_RATE_CHANGE:
> +		mutex_lock(&priv->clk_mutex);
> +		priv->update_clk_rate = true;
> +		drm_crtc_wait_one_vblank(&priv->crtc);
> +		return NOTIFY_OK;
> +	default:
> +		mutex_unlock(&priv->clk_mutex);
Any risk the POST_RATE_CHANGE or ABORT_RATE_CHANGE may go missing so we
fail to unlock the mutex?
I think not but wanted to make sure you had thought about it.

> +		return NOTIFY_OK;
> +	}
> +}
> +
>  static void ingenic_drm_crtc_atomic_enable(struct drm_crtc *crtc,
>  					   struct drm_crtc_state *state)
>  {
> @@ -280,8 +307,14 @@ static void ingenic_drm_crtc_atomic_flush(struct drm_crtc *crtc,
>  
>  	if (drm_atomic_crtc_needs_modeset(state)) {
>  		ingenic_drm_crtc_update_timings(priv, &state->mode);
> +		priv->update_clk_rate = true;
> +	}
>  
> +	if (priv->update_clk_rate) {
> +		mutex_lock(&priv->clk_mutex);
>  		clk_set_rate(priv->pix_clk, state->adjusted_mode.clock * 1000);
> +		priv->update_clk_rate = false;
> +		mutex_unlock(&priv->clk_mutex);
>  	}
>  
>  	if (event) {
> @@ -1046,16 +1079,28 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
>  	if (soc_info->has_osd)
>  		regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
>  
> +	mutex_init(&priv->clk_mutex);
> +	priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
> +
> +	parent_clk = clk_get_parent(priv->pix_clk);
> +	ret = clk_notifier_register(parent_clk, &priv->clock_nb);
> +	if (ret) {
> +		dev_err(dev, "Unable to register clock notifier\n");
> +		goto err_devclk_disable;
> +	}
> +
>  	ret = drm_dev_register(drm, 0);
>  	if (ret) {
>  		dev_err(dev, "Failed to register DRM driver\n");
> -		goto err_devclk_disable;
> +		goto err_clk_notifier_unregister;
>  	}
>  
>  	drm_fbdev_generic_setup(drm, 32);
>  
>  	return 0;
>  
> +err_clk_notifier_unregister:
> +	clk_notifier_unregister(parent_clk, &priv->clock_nb);
>  err_devclk_disable:
>  	if (priv->lcd_clk)
>  		clk_disable_unprepare(priv->lcd_clk);
> @@ -1077,7 +1122,9 @@ static int compare_of(struct device *dev, void *data)
>  static void ingenic_drm_unbind(struct device *dev)
>  {
>  	struct ingenic_drm *priv = dev_get_drvdata(dev);
> +	struct clk *parent_clk = clk_get_parent(priv->pix_clk);
>  
> +	clk_notifier_unregister(parent_clk, &priv->clock_nb);
>  	if (priv->lcd_clk)
>  		clk_disable_unprepare(priv->lcd_clk);
>  	clk_disable_unprepare(priv->pix_clk);
> -- 
> 2.28.0