Re: [PATCH v2] drm/panel: otm8009a: remove hack to force commands in HS

[Sam Ravnborg]

On Tue, Sep 22, 2020 at 09:42:42AM +0200, Yannick Fertre wrote:
> From: Antonio Borneo <antonio.borneo@xxxxxx>
> 
> The panel is able to receive commands in LP. The current hack to
> force backlight commands in HS was due to workaround an incorrect
> settings on DSI controller that prevents sending LP commands while
> video out was active.
> 
> Remove the hack that forces HS commands.
> 
> Changes in v2:
>   - Added my signed-off
> 
> Signed-off-by: Antonio Borneo <antonio.borneo@xxxxxx>
> Signed-off-by: Yannick Fertre <yannick.fertre@xxxxxx>

Thanks, applied to drm-misc-next.

	Sam


> ---
>  .../gpu/drm/panel/panel-orisetech-otm8009a.c   | 18 ++----------------
>  1 file changed, 2 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> index 6ac1accade80..f80b44a8a700 100644
> --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> @@ -99,20 +99,6 @@ static void otm8009a_dcs_write_buf(struct otm8009a *ctx, const void *data,
>  		dev_warn(ctx->dev, "mipi dsi dcs write buffer failed\n");
>  }
>  
> -static void otm8009a_dcs_write_buf_hs(struct otm8009a *ctx, const void *data,
> -				      size_t len)
> -{
> -	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> -
> -	/* data will be sent in dsi hs mode (ie. no lpm) */
> -	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> -
> -	otm8009a_dcs_write_buf(ctx, data, len);
> -
> -	/* restore back the dsi lpm mode */
> -	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> -}
> -
>  #define dcs_write_seq(ctx, seq...)			\
>  ({							\
>  	static const u8 d[] = { seq };			\
> @@ -400,7 +386,7 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd)
>  		 */
>  		data[0] = MIPI_DCS_SET_DISPLAY_BRIGHTNESS;
>  		data[1] = bd->props.brightness;
> -		otm8009a_dcs_write_buf_hs(ctx, data, ARRAY_SIZE(data));
> +		otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data));
>  
>  		/* set Brightness Control & Backlight on */
>  		data[1] = 0x24;
> @@ -412,7 +398,7 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd)
>  
>  	/* Update Brightness Control & Backlight */
>  	data[0] = MIPI_DCS_WRITE_CONTROL_DISPLAY;
> -	otm8009a_dcs_write_buf_hs(ctx, data, ARRAY_SIZE(data));
> +	otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data));
>  
>  	return 0;
>  }
> -- 
> 2.17.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel