[PATCH v2] iio: adc: gyroadc: fix leak of device node iterator

From: Tobias Jordan
Date: Sat Sep 26 2020 - 12:19:56 EST


Add missing of_node_put calls when exiting the for_each_child_of_node
loop in rcar_gyroadc_parse_subdevs early.

Also add goto-exception handling for the error paths in that loop.

Fixes: 059c53b32329 ("iio: adc: Add Renesas GyroADC driver")
Signed-off-by: Tobias Jordan <kernel@xxxxxxx>
---
v2:
- added an of_node_put to the non-error "break" at the end
- used gotos for the error cases, doesn't look as bad as I thought

drivers/iio/adc/rcar-gyroadc.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c
index dcaefc108ff6..9f38cf3c7dc2 100644
--- a/drivers/iio/adc/rcar-gyroadc.c
+++ b/drivers/iio/adc/rcar-gyroadc.c
@@ -357,7 +357,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
num_channels = ARRAY_SIZE(rcar_gyroadc_iio_channels_3);
break;
default:
- return -EINVAL;
+ goto err_e_inval;
}

/*
@@ -374,7 +374,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
dev_err(dev,
"Failed to get child reg property of ADC \"%pOFn\".\n",
child);
- return ret;
+ goto err_of_node_put;
}

/* Channel number is too high. */
@@ -382,7 +382,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
dev_err(dev,
"Only %i channels supported with %pOFn, but reg = <%i>.\n",
num_channels, child, reg);
- return -EINVAL;
+ goto err_e_inval;
}
}

@@ -391,7 +391,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
dev_err(dev,
"Channel %i uses different ADC mode than the rest.\n",
reg);
- return -EINVAL;
+ goto err_e_inval;
}

/* Channel is valid, grab the regulator. */
@@ -401,7 +401,8 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
if (IS_ERR(vref)) {
dev_dbg(dev, "Channel %i 'vref' supply not connected.\n",
reg);
- return PTR_ERR(vref);
+ ret = PTR_ERR(vref);
+ goto err_of_node_put;
}

priv->vref[reg] = vref;
@@ -425,8 +426,10 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
* attached to the GyroADC at a time, so if we found it,
* we can stop parsing here.
*/
- if (childmode == RCAR_GYROADC_MODE_SELECT_1_MB88101A)
+ if (childmode == RCAR_GYROADC_MODE_SELECT_1_MB88101A) {
+ of_node_put(child);
break;
+ }
}

if (first) {
@@ -435,6 +438,12 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
}

return 0;
+
+err_e_inval:
+ ret = -EINVAL;
+err_of_node_put:
+ of_node_put(child);
+ return ret;
}

static void rcar_gyroadc_deinit_supplies(struct iio_dev *indio_dev)
--
2.20.1