[PATCH v4 0/2] SM8150 and SM8250 dispcc drivers

[Jonathan Marek]

Add display clock drivers required to get DSI and DP displays working on
SM8150 and SM8250 SoCs.

Derived from downstream drivers. Notable changes compared to downstream:
 - EDP clks removed (nothing uses these even in downstream it seems)
 - freq_tbl values for dp_link clk is in Hz and not kHz

v2:
 - updated dts example to reflect the change (first patch)
 - updated config_ctl_hi1_val in sm8250 dispcc to latest downstream

v3:
 - combined dt-binding: "gcc_disp_gpll0_clk_src" is needed by sc7180 too
 - use the right order in drivers/clk/qcom/Kconfig

v4:
 - Dropped combining yaml with sdm845/sc7180 dispcc
 - Combined drivers into one (sm8250 driver + patched pll config for sm8150)
 - Dropped uses of CLK_GET_RATE_NOCACHE (which was copied from downstream)
 - Dropped CLK_SET_RATE_PARENT from some DP clocks (upstream phy design)

Jonathan Marek (2):
  dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings
  clk: qcom: Add display clock controller driver for SM8150 and SM8250

 .../bindings/clock/qcom,dispcc-sm8x50.yaml    |   93 ++
 drivers/clk/qcom/Kconfig                      |    9 +
 drivers/clk/qcom/Makefile                     |    1 +
 drivers/clk/qcom/dispcc-sm8250.c              | 1107 +++++++++++++++++
 .../dt-bindings/clock/qcom,dispcc-sm8150.h    |    1 +
 .../dt-bindings/clock/qcom,dispcc-sm8250.h    |   66 +
 6 files changed, 1277 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
 create mode 100644 drivers/clk/qcom/dispcc-sm8250.c
 create mode 120000 include/dt-bindings/clock/qcom,dispcc-sm8150.h
 create mode 100644 include/dt-bindings/clock/qcom,dispcc-sm8250.h

-- 
2.26.1