[PATCH 0/7] Add minimal boot support for IPQ5018

[Varadarajan Narayanan]

The IPQ5018 is Qualcomm's 802.11ax SoC for Routers,
Gateways and Access Points.

This series adds minimal board boot support for ipq5018-mp03.1-c2 board.

Varadarajan Narayanan (7):
  clk: qcom: clk-alpha-pll: Add support for Stromer PLLs
  dt-bindings: arm64: ipq5018: Add binding descriptions for clock and
    reset
  clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018
  dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings
  pinctrl: qcom: Add IPQ5018 pinctrl driver
  arm64: dts: Add ipq5018 SoC and MP03 board support
  arm64: defconfig: Enable IPQ5018 SoC base configs

 Documentation/devicetree/bindings/arm/qcom.yaml    |    7 +
 .../devicetree/bindings/clock/qcom,gcc.yaml        |    3 +
 .../bindings/pinctrl/qcom,ipq5018-pinctrl.yaml     |  143 +
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts     |   30 +
 arch/arm64/boot/dts/qcom/ipq5018.dtsi              |  201 +
 arch/arm64/configs/defconfig                       |    3 +
 drivers/clk/qcom/Kconfig                           |    8 +
 drivers/clk/qcom/Makefile                          |    1 +
 drivers/clk/qcom/clk-alpha-pll.c                   |  156 +-
 drivers/clk/qcom/clk-alpha-pll.h                   |    5 +
 drivers/clk/qcom/gcc-ipq5018.c                     | 3833 ++++++++++++++++++++
 drivers/pinctrl/qcom/Kconfig                       |   10 +
 drivers/pinctrl/qcom/Makefile                      |    1 +
 drivers/pinctrl/qcom/pinctrl-ipq5018.c             |  903 +++++
 include/dt-bindings/clock/qcom,gcc-ipq5018.h       |  183 +
 include/dt-bindings/reset/qcom,gcc-ipq5018.h       |  119 +
 include/linux/clk-provider.h                       |    4 +-
 18 files changed, 5608 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi
 create mode 100644 drivers/clk/qcom/gcc-ipq5018.c
 create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5018.c
 create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h
 create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h

-- 
2.7.4