[PATCH v8 0/5] arm: dts: add and modify device node in NPCM7xx device tree

[Tomer Maimon]

This patch set adds and modify device tree nodes in the NPCM7xx
Baseboard Management Controller (BMC) device tree.

The following device node add:
        - NPCM7xx Pin controller and GPIO
        - NPCM7xx PWM and FAN.
        - NPCM7xx EHCI USB.
        - NPCM7xx KCS.
        - NPCM Reset.
        - NPCM Peripheral SPI.
        - NPCM FIU SPI.
        - NPCM HWRNG.
        - NPCM I2C.
        - STMicro STMMAC.

The following device node modified:
        - NPCM7xx timer.
        - NPCM7xx clock constants parameters.

NPCM7xx device tree tested on NPCM750 evaluation board.

Changes since version 7:
Address comments from Joel Stanely: https://www.spinics.net/lists/devicetree/msg380191.html

Changes since version 6:
Split commits.
 
Changes since version 5:
Address comments from Joel Stanely: https://lkml.org/lkml/2020/9/16/994
 
Changes since version 4:
 - Tested patches in Linux kernel 5.9.

Changes since version 3:
 - Tested patches in Linux kernel 5.6.

Changes since version 2:
 - Remove unnecessary output-enable flags.

Changes since version 1:
 - Add NPCM reset device node.
 - Add reset parameters to NPCM driver device nodes.


Tomer Maimon (5):
  arm: dts: modify NPCM7xx device tree clock parameter
  arm: dts: modify NPCM7xx device tree timer register size
  arm: dts: add pinctrl and GPIO node to NPCM7XX device tree
  arm: dts: add new device nodes to NPCM7XX device tree
  arm: dts: add new device nodes to NPCM750 device tree EVB

 arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 967 +++++++++++++++++-
 arch/arm/boot/dts/nuvoton-npcm750-evb.dts     | 367 ++++++-
 .../boot/dts/nuvoton-npcm750-pincfg-evb.dtsi  | 157 +++
 arch/arm/boot/dts/nuvoton-npcm750.dtsi        |  24 +-
 4 files changed, 1495 insertions(+), 20 deletions(-)
 create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi

-- 
2.22.0