Re: [PATCH 1/4] dt-bindings: phy: convert phy-mtk-xsphy.txt to YAML schema

[Rob Herring]

On Tue, Sep 22, 2020 at 03:55:05PM +0800, Chunfeng Yun wrote:
> Convert phy-mtk-xsphy.txt to YAML schema mediatek,xsphy.yaml
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> ---
>  .../bindings/phy/mediatek,xsphy.yaml          | 203 ++++++++++++++++++
>  .../devicetree/bindings/phy/phy-mtk-xsphy.txt | 109 ----------
>  2 files changed, 203 insertions(+), 109 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
>  delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
> new file mode 100644
> index 000000000000..0aaa10640b5a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
> @@ -0,0 +1,203 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek XS-PHY Controller Device Tree Bindings
> +
> +maintainers:
> +  - Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> +
> +description: |
> +  The XS-PHY controller supports physical layer functionality for USB3.1
> +  GEN2 controller on MediaTek SoCs.
> +
> +properties:
> +  $nodename:
> +    pattern: "^xs-phy@[0-9a-f]+$"
> +
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - mediatek,mt3611-xsphy
> +          - enum:
> +              - mediatek,xsphy
> +      - items:
> +          - const: mediatek,xsphy

mediatek,xsphy alone should not be valid.

> +
> +  reg:
> +    description: |
> +      Register shared by multiple U3 ports, exclude port's private register,
> +      if only U2 ports provided, shouldn't use the property.
> +    maxItems: 1
> +
> +  "#address-cells":
> +      enum: [1, 2]
> +
> +  "#size-cells":
> +      enum: [1, 2]
> +
> +  ranges: true
> +
> +  mediatek,src-ref-clk-mhz:
> +    description:
> +      Frequency of reference clock for slew rate calibrate
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 26
> +
> +  mediatek,src-coef:
> +    description:
> +      Coefficient for slew rate calibrate, depends on SoC process
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 17
> +
> +# Required child node:
> +patternProperties:
> +  "^usb-phy@[0-9a-f]+$":
> +    type: object
> +    description: |
> +      A sub-node is required for each port the controller provides.
> +      Address range information including the usual 'reg' property
> +      is used inside these nodes to describe the controller's topology.
> +
> +    properties:
> +      reg:
> +        maxItems: 1
> +
> +      clocks:
> +        items:
> +          - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
> +
> +      clock-names:
> +        items:
> +          - const: ref
> +
> +      "#phy-cells":
> +        const: 1
> +        description: |
> +          The cells contain the following arguments.
> +
> +          - description: The PHY type
> +              enum:
> +                - PHY_TYPE_USB2
> +                - PHY_TYPE_USB3
> +
> +      #The following optional vendor properties are only for debug or HQA test
> +      mediatek,eye-src:
> +        description:
> +          The value of slew rate calibrate (U2 phy)
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        minimum: 1
> +        maximum: 7
> +
> +      mediatek,eye-vrt:
> +        description:
> +          The selection of VRT reference voltage (U2 phy)
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        minimum: 1
> +        maximum: 7
> +
> +      mediatek,eye-term:
> +        description:
> +          The selection of HS_TX TERM reference voltage (U2 phy)
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        minimum: 1
> +        maximum: 7
> +
> +      mediatek,efuse-intr:
> +        description:
> +          The selection of Internal Resistor (U2/U3 phy)
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        minimum: 1
> +        maximum: 63
> +
> +      mediatek,efuse-tx-imp:
> +        description:
> +          The selection of TX Impedance (U3 phy)
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        minimum: 1
> +        maximum: 31
> +
> +      mediatek,efuse-rx-imp:
> +        description:
> +          The selection of RX Impedance (U3 phy)
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        minimum: 1
> +        maximum: 31
> +
> +    required:
> +      - reg
> +      - clocks
> +      - clock-names
> +      - "#phy-cells"
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +
> +additionalProperties: false
> +
> +#Banks layout of xsphy
> +#-------------------------------------------------------------

Move this to top-level 'description'.

> +#port        offset    bank
> +#u2 port0    0x0000    MISC
> +#            0x0100    FMREG
> +#            0x0300    U2PHY_COM
> +#u2 port1    0x1000    MISC
> +#            0x1100    FMREG
> +#            0x1300    U2PHY_COM
> +#u2 port2    0x2000    MISC
> +#            ...
> +#u31 common  0x3000    DIG_GLB
> +#            0x3100    PHYA_GLB
> +#u31 port0   0x3400    DIG_LN_TOP
> +#            0x3500    DIG_LN_TX0
> +#            0x3600    DIG_LN_RX0
> +#            0x3700    DIG_LN_DAIF
> +#            0x3800    PHYA_LN
> +#u31 port1   0x3a00    DIG_LN_TOP
> +#            0x3b00    DIG_LN_TX0
> +#            0x3c00    DIG_LN_RX0
> +#            0x3d00    DIG_LN_DAIF
> +#            0x3e00    PHYA_LN
> +#            ...
> +#DIG_GLB & PHYA_GLB are shared by U31 ports.
> +
> +examples:
> +  - |
> +    #include <dt-bindings/phy/phy.h>
> +
> +    u3phy: xs-phy@11c40000 {
> +        compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
> +        reg = <0x11c43000 0x0200>;
> +        mediatek,src-ref-clk-mhz = <26>;
> +        mediatek,src-coef = <17>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges;
> +
> +        u2port0: usb-phy@11c40000 {
> +            reg = <0x11c40000 0x0400>;
> +            clocks = <&clk48m>;
> +            clock-names = "ref";
> +            mediatek,eye-src = <4>;
> +            #phy-cells = <1>;
> +        };
> +
> +        u3port0: usb-phy@11c43000 {
> +            reg = <0x11c43400 0x0500>;
> +            clocks = <&clk26m>;
> +            clock-names = "ref";
> +            mediatek,efuse-intr = <28>;
> +            #phy-cells = <1>;
> +        };
> +    };
> +
> +...