Re: [PATCH v6 2/3] media: i2c: ov772x: Add support for BT.656 mode

[Jacopo Mondi]

Hello,

On Thu, Sep 17, 2020 at 06:42:23PM +0100, Lad Prabhakar wrote:
> Add support to read the bus-type for V4L2_MBUS_BT656 and enable BT.656
> mode in the sensor if needed.
>
> For backward compatibility with older DTS where the bus-type property was
> not mandatory, assume V4L2_MBUS_PARALLEL as it was the only supported bus
> at the time. v4l2_fwnode_endpoint_alloc_parse() will not fail if
> 'bus-type' is not specified.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>

Reviewed-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>

Thanks
  j

> ---
>  drivers/media/i2c/ov772x.c | 23 +++++++++++++++++++++--
>  1 file changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> index f61a3f09ad64..fe48b5881ad9 100644
> --- a/drivers/media/i2c/ov772x.c
> +++ b/drivers/media/i2c/ov772x.c
> @@ -583,6 +583,13 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
>  	if (priv->streaming == enable)
>  		goto done;
>
> +	if (priv->bus_type == V4L2_MBUS_BT656) {
> +		ret = regmap_update_bits(priv->regmap, COM7, ITU656_ON_OFF,
> +					 enable ? ITU656_ON_OFF : ~ITU656_ON_OFF);
> +		if (ret)
> +			goto done;
> +	}
> +
>  	ret = regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE,
>  				 enable ? 0 : SOFT_SLEEP_MODE);
>  	if (ret)
> @@ -1364,10 +1371,22 @@ static int ov772x_parse_dt(struct i2c_client *client,
>  		return -EINVAL;
>  	}
>
> +	/*
> +	 * For backward compatibility with older DTS where the
> +	 * bus-type property was not mandatory, assume
> +	 * V4L2_MBUS_PARALLEL as it was the only supported bus at the
> +	 * time. v4l2_fwnode_endpoint_alloc_parse() will not fail if
> +	 * 'bus-type' is not specified.
> +	 */
>  	bus_cfg.bus_type = V4L2_MBUS_PARALLEL;
>  	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
> -	if (ret)
> -		goto error_fwnode_put;
> +	if (ret) {
> +		bus_cfg = (struct v4l2_fwnode_endpoint)
> +			  { .bus_type = V4L2_MBUS_BT656 };
> +		ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
> +		if (ret)
> +			goto error_fwnode_put;
> +	}
>
>  	priv->bus_type = bus_cfg.bus_type;
>  	v4l2_fwnode_endpoint_free(&bus_cfg);
> --
> 2.17.1
>